Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
050806102934 080016000
Quickly Aligns & Positively Holds Bolts And Knobs For Welding
Any gunsmith who has ever fiddled, fussed and fumed as he tried to align a bolt knob with the cut-off stub of a military bolt handle while altering the bolt for scope mounting, will love this jig. As the illustration shows, the jig makes it possible to lock both knob and bolt in precisely the desired relationship and hold them firmly, while leaving adequate space to weld by either the acetylene or arc methods. Getting the knob and bolt into alignment used to be a real chore and, without the jig to hold it all together, one incautious movement could upset the alignment, leaving the work to be done all over again. The jig employs a different approach to aligning the handle to the bolt by using a protractor supplied with the jig kit. Full and completely illustrated instructions are supplied with each jig set. They assure an accurate setup. The Brownell Bolt Welding Jig will pay for itself many times over during the course of the years - not only in time but in saved dispositions! Further, it makes it possible for the man who does not have welding facilities in his shop to get the bolt all ready to weld, and then take it to a professional welding shop for the final work. If you have ever tried to explain to a non-gun-loving welder how you wanted the job done and then stood there and watched him "botch it up", the great value of the JIG to you is even more apparent!!
SPECS: "V" clamps are 2-3/8" (8.6cm) long x 5/8" (15.9mm) wide x 1¼" (3.2cm) high with 1" (2.5cm) clamp opening. One leg is 4" (10.2cm) long and the other is 5" (15.2cm).
89.9 89.9 1 CHF
N. prodotto: 080016000
BROWNELLS BOLT WELDING JIG PLUS PROTRACTOR & INSTRUCTIONS 050806102934 Qualsiasi armaiolo che ha mai giocherellava, coccolato e pirogenico come cercò di allineare una manopola di bullone con lo stub di cut-off di un militare manetta mentre alterando il bullone di montaggio di portata, amerete questo jig. Come illustrato nella figura, il jig rende possibile bloccare entrambi manopola e bullone in proprio il rapporto desiderato e li tengono saldamente, pur lasciando spazio sufficiente per saldare con metodi acetilene o all'arco. Ottenendo la manopola e il bullone in allineamento usato per essere un vero lavoretto e, senza il jig per tenere tutto insieme, un movimento incauto potrebbe sconvolgere l'allineamento, lasciando il lavoro da fare in tutto. Il jig impiega un diverso approccio alla allineando la maniglia al bullone usando un goniometro fornito nel kit di jig. Istruzioni completa e completamente illustrate vengono fornite con ogni set di jig. Assicurano un'accurata installazione. La maschera di saldatura Brownell bullone pagherà se molte volte nel corso degli anni - non solo nel tempo ma in disposizioni salvate! Inoltre, rende possibile per l'uomo che non dispone di strutture nel suo negozio per ottenere il bullone tutti pronti a saldare e poi portarlo ad un professionista in negozio per l'ultimo lavoro di saldatura di saldatura. Se avete mai provato a spiegare a un saldatore non amano la pistola come si voleva che il lavoro fatto e poi stava lì e lo guardavano "pasticcio it up", il grande valore del JIG a voi è ancora più evidente!!
89.9 CHF 0 CHF 89.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Universal Rifles

Caratteristiche

Adatto per: Universal Rifles Peso della spedizione: 0.408kg Altezza di spedizione: 46mm Larghezza di spedizione: 124mm Lunghezza di spedizione: 226mm

Dettagli dell'elemento

Made in Usa



Quickly Aligns & Positively Holds Bolts And Knobs For Welding
Any gunsmith who has ever fiddled, fussed and fumed as he tried to align a bolt knob with the cut-off stub of a military bolt handle while altering the bolt for scope mounting, will love this jig. As the illustration shows, the jig makes it possible to lock both knob and bolt in precisely the desired relationship and hold them firmly, while leaving adequate space to weld by either the acetylene or arc methods. Getting the knob and bolt into alignment used to be a real chore and, without the jig to hold it all together, one incautious movement could upset the alignment, leaving the work to be done all over again. The jig employs a different approach to aligning the handle to the bolt by using a protractor supplied with the jig kit. Full and completely illustrated instructions are supplied with each jig set. They assure an accurate setup. The Brownell Bolt Welding Jig will pay for itself many times over during the course of the years - not only in time but in saved dispositions! Further, it makes it possible for the man who does not have welding facilities in his shop to get the bolt all ready to weld, and then take it to a professional welding shop for the final work. If you have ever tried to explain to a non-gun-loving welder how you wanted the job done and then stood there and watched him "botch it up", the great value of the JIG to you is even more apparent!!
SPECS: "V" clamps are 2-3/8" (8.6cm) long x 5/8" (15.9mm) wide x 1¼" (3.2cm) high with 1" (2.5cm) clamp opening. One leg is 4" (10.2cm) long and the other is 5" (15.2cm).
Newsletter