Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
080561000
Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
139.9 139.9 1 CHF
N. prodotto: 080561000
BROWNELLS JAMES B. MEEK BEGINNER'S KIT Abbiamo chiesto James B. Meek, autore di l'arte dell'incisione per i suoi consigli. Questo è quello che ha scritto: "forse il 90% di tutto il lavoro di scorrimento in incisione può essere fatto con i seguenti strumenti". Bulino punto n. ° 4 taglierà la maggior parte delle pergamene. Dettaglio fine è tagliato con punto 0. Coltello n. 2 è anche per il dettaglio. La piazza è forse il più ampiamente utilizzato, può anche essere affilato come un punto, o uno scalpello, Flat nn. 36 e 37 e Round nn. 50 e 54 sono necessari per lettering su altorilievo. Kit contiene: punto - n. 0 e 4; Piazza - GlenSteel (2) gli spazi vuoti; Piatto - n. 36 e 39; Coltello - n. 2; Turno - n. 50 e 54. 9 bulini totale.
139.9 CHF 0 CHF 139.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 0.091kg Altezza di spedizione: 58mm Larghezza di spedizione: 61mm Lunghezza di spedizione: 173mm

Dettagli dell'elemento

Made in Usa



Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
Newsletter