Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

EGW
SAVAGE FLAT BACK LONG ACTION PICATINNY SCOPE MOUNT

841370105601 296000788
This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
64.9 64.9 1 CHF
N. prodotto: 296000788
EGW SAVAGE FLAT BACK LONG ACTION 1-PIECE PICATINNY BASE 0 MOA
Parti Fabbricante: 41400 841370105601
64.9 CHF 0 CHF 64.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: Savage Arms Colore: Black Elevation: 0 MOA Materiale: Alluminio Modello: 110, 112, 116, 111, 114 Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo di azione: Long

Caratteristiche

Adatto per: Savage Arms Colore: Black Elevation: 0 MOA Materiale: Alluminio Modello: 110,111,112,114,116 Numero di basi: 1 pezzo Tipo: Picatinny Rail Tipo azione: Long Peso della spedizione: 0.091kg Altezza di spedizione: 19mm Larghezza di spedizione: 89mm Lunghezza di spedizione: 229mm

Dettagli dell'elemento

Made in Usa



This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This mount fits: Savage Model 110 Long Action Flat Rear Receiver Savage Model 111 Long Action Flat Rear Receiver Savage Model 112 Long Action Flat Rear Receiver Savage Model 114 Long Action Flat Rear Receiver Savage Model 116 Long Action Flat Rear Receiver This mount does not fit: Any Savage Long Action with a Round Rear Receiver
Newsletter