Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Altro...
Manico del cacciavite vi dà aggiunto controllo; Molla acciaio Collet è delicato sull'alluminio più morbida
Strumento di risparmio cefalea comprende una pinza regolabile, molla in acciaio che positivamente e delicatamente tiene il globo della vista per installazione facile e senza danni. La molla in acciaio è delicato sulle perle di vista, più si leva in piedi fino a ripetuto utilizzo per una lunga durata. Un manico del cacciavite Brownells migliora il controllo per avvitare le viste senza danno a loro o la canna. Disponibile in Small e Large per ospitare praticamente qualsiasi dimensioni perla vista.
Specifiche: manico in plastica, pinza a molla in acciaio. Piccolo - diametro manico 1"(2,54 cm). Installa vista perline con diametri tra. 050"(1,3 mm) a. 125" (3.2 mm). Large - 1-7/64" manico di diametro (2,82 cm). Installa vista perline con diametri tra. 115"(2.9 mm) a. 188" (4,8 mm).
Altro...
Punteggi dei clienti per BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.3
Good tool(15.01.2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08.05.2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28.03.2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.
N. prodotto: 080000093 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL Strumento di risparmio cefalea comprende una pinza regolabile, molla in acciaio che positivamente e delicatamente tiene il globo della vista per installazione facile e senza danni. La molla in acciaio è delicato sulle perle di vista, più si leva in piedi fino a ripetuto utilizzo per una lunga durata. Un manico del cacciavite Brownells migliora il controllo per avvitare le viste senza danno a loro o la canna. Disponibile in Small e Large per ospitare praticamente qualsiasi dimensioni perla vista.
32.9CHF1CHF 32.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Universal Shotguns
Peso della spedizione: 0.091kgAltezza di spedizione: 23mmLarghezza di spedizione: 53mmLunghezza di spedizione: 175mm
N. prodotto: 080000094 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER LARGE Strumento di risparmio cefalea comprende una pinza regolabile, molla in acciaio che positivamente e delicatamente tiene il globo della vista per installazione facile e senza danni. La molla in acciaio è delicato sulle perle di vista, più si leva in piedi fino a ripetuto utilizzo per una lunga durata. Un manico del cacciavite Brownells migliora il controllo per avvitare le viste senza danno a loro o la canna. Disponibile in Small e Large per ospitare praticamente qualsiasi dimensioni perla vista.
36.9CHF14CHF 36.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Altro...
Manico del cacciavite vi dà aggiunto controllo; Molla acciaio Collet è delicato sull'alluminio più morbida
Strumento di risparmio cefalea comprende una pinza regolabile, molla in acciaio che positivamente e delicatamente tiene il globo della vista per installazione facile e senza danni. La molla in acciaio è delicato sulle perle di vista, più si leva in piedi fino a ripetuto utilizzo per una lunga durata. Un manico del cacciavite Brownells migliora il controllo per avvitare le viste senza danno a loro o la canna. Disponibile in Small e Large per ospitare praticamente qualsiasi dimensioni perla vista.
Specifiche: manico in plastica, pinza a molla in acciaio. Piccolo - diametro manico 1"(2,54 cm). Installa vista perline con diametri tra. 050"(1,3 mm) a. 125" (3.2 mm). Large - 1-7/64" manico di diametro (2,82 cm). Installa vista perline con diametri tra. 115"(2.9 mm) a. 188" (4,8 mm).
Altro...
Punteggi dei clienti per BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 2.3
Good tool(15.01.2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08.05.2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28.03.2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.