Gain increased sighting options for your Marlin centerfire lever rifle by installing this lightweight, aluminum scope rail. Accepts Picatinny or Weaver-style rings, plus is specially milled on back end to accept the XS Sight Systems Lever Rail Ghost Ring Sight for Marlin 1894, 1895 and Marlin 336/308MX (found elsewhere in catalog). Extra-long rail gives plenty of versatility in mounting scope directly over the receiver or forward over the barrel for intermediate eye relief optics or red dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.
Fornisce il montaggio flessibile di ottica & attrazioni
Guadagno maggiore avvistamento opzioni per il vostro fucile di leva Marlin centerfire installando questo leggero, rotaia di alluminio portata. Accetta Picatinny o stile Weaver anelli, più è appositamente fresato su back-end per accettare la XS vista sistemi leva Rail fantasma vista anello per Marlin 1894, 1895 e Marlin 336/308MX (trovato altrove nel catalogo). Extra-lunga rotaia dà un sacco di versatilità in ambito di montaggio direttamente sul ricevitore o in avanti sopra la canna per occhio intermedio rilievo ottica o red dot luoghi. Richiede la rimozione della vista posteriore di fabbrica. Consigliata l'installazione armaiolo.
Specifiche: in alluminio, finitura opaca, nero. 11 (cm 27) lunga,. 830"(21mm) wide. 3 oz.(85g) peso. Include il supporto di montaggio.
Altro...
Punteggi dei clienti per XS SIGHT SYSTEMS MARLIN 336/308X LEVER RAIL
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4
Great addition (26.12.2014)
First of all, the product came well packed and arrived very fast.
I install this on a 1894 in 44 mag, 20" micro groove. I did have to modify the front hole(with a round file), small (1/3-1/2 mm) for everything to fit just right. I got it very tight. After getting the hole move forward to fit on pillar, I trimmed the ring nut and also the recess just enough for ring nut to fit(with a Dremmel and stones). I took a black marker to all parts modified. I also used instructions on line @ SX.
I already had ghost rings, but the screw to install this is not included. I contacted SX, and they sent one out for free. Ordered it on the 22nd and got it today, The 26th.
This looks great. I will be able to use all sorts of optics on this, like a reflex, red dot, or various scopes.
My first mount will be a Leupold 1.5x5x20. I have ordered some Warne med rings(QD). I have estimated just under a 1/2" rise needed to keep ghost ring sight.
If you are going to use just one type of optic, Warne offers mounting plates for there rings, But this rail is very cool looking.
.
Easy to install(23.10.2009)
Rail mounted and aligned well. All required parts were included. (plastic drift punch, thread compound, allen wrench, screws, etc) Just needed a hammer and the proper fitting screwdriver. Written instructions were a little vague; but, understandable.
Flexible mount system, well made(27.10.2009)
Nice system. Gives more ring locations to accommodate different length scope tubes and ring types, plus accomdates back up metallic sights. Installation was easy, a drop on.
XS Sight Systems Service(05.08.2015)
Talked with the service technician about my two issues with the rail. She was very knowledgeable and professional. She recommended remedial actions and sent a replacement part. It was nice to talk to someone that really knew their job and product.
N. prodotto: 006000165 XS SIGHT SYSTEMS MARLIN 336/308X LEVER RAIL Parti Fabbricante: ML-6004R-N647533042567 Guadagno maggiore avvistamento opzioni per il vostro fucile di leva Marlin centerfire installando questo leggero, rotaia di alluminio portata. Accetta Picatinny o stile Weaver anelli, più è appositamente fresato su back-end per accettare la XS vista sistemi leva Rail fantasma vista anello per Marlin 1894, 1895 e Marlin 336/308MX (trovato altrove nel catalogo). Extra-lunga rotaia dà un sacco di versatilità in ambito di montaggio direttamente sul ricevitore o in avanti sopra la canna per occhio intermedio rilievo ottica o red dot luoghi. Richiede la rimozione della vista posteriore di fabbrica. Consigliata l'installazione armaiolo.
124.9CHF7CHF 124.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: MarlinColore: Opaco BlackMateriale: AlluminioModello: 336Numero di basi: 1 pezzoTipo: Basi tattiche
Adatto per:
Marlin
Colore:
Opaco Black
Materiale:
Alluminio
Modello:
336
Numero di basi:
1 pezzo
Tipo:
Basi tattiche
Peso della spedizione: 0.113kgAltezza di spedizione: 43mmLarghezza di spedizione: 23mmLunghezza di spedizione: 305mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 006000151 XS SIGHT SYSTEMS MARLIN 1895 LEVER RAIL Parti Fabbricante: ML-6003R-N647533042550 Guadagno maggiore avvistamento opzioni per il vostro fucile di leva Marlin centerfire installando questo leggero, rotaia di alluminio portata. Accetta Picatinny o stile Weaver anelli, più è appositamente fresato su back-end per accettare la XS vista sistemi leva Rail fantasma vista anello per Marlin 1894, 1895 e Marlin 336/308MX (trovato altrove nel catalogo). Extra-lunga rotaia dà un sacco di versatilità in ambito di montaggio direttamente sul ricevitore o in avanti sopra la canna per occhio intermedio rilievo ottica o red dot luoghi. Richiede la rimozione della vista posteriore di fabbrica. Consigliata l'installazione armaiolo.
124.9CHF6CHF 124.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Gain increased sighting options for your Marlin centerfire lever rifle by installing this lightweight, aluminum scope rail. Accepts Picatinny or Weaver-style rings, plus is specially milled on back end to accept the XS Sight Systems Lever Rail Ghost Ring Sight for Marlin 1894, 1895 and Marlin 336/308MX (found elsewhere in catalog). Extra-long rail gives plenty of versatility in mounting scope directly over the receiver or forward over the barrel for intermediate eye relief optics or red dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.
Fornisce il montaggio flessibile di ottica & attrazioni
Guadagno maggiore avvistamento opzioni per il vostro fucile di leva Marlin centerfire installando questo leggero, rotaia di alluminio portata. Accetta Picatinny o stile Weaver anelli, più è appositamente fresato su back-end per accettare la XS vista sistemi leva Rail fantasma vista anello per Marlin 1894, 1895 e Marlin 336/308MX (trovato altrove nel catalogo). Extra-lunga rotaia dà un sacco di versatilità in ambito di montaggio direttamente sul ricevitore o in avanti sopra la canna per occhio intermedio rilievo ottica o red dot luoghi. Richiede la rimozione della vista posteriore di fabbrica. Consigliata l'installazione armaiolo.
Specifiche: in alluminio, finitura opaca, nero. 11 (cm 27) lunga,. 830"(21mm) wide. 3 oz.(85g) peso. Include il supporto di montaggio.
Altro...
Punteggi dei clienti per XS SIGHT SYSTEMS MARLIN 336/308X LEVER RAIL
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4
Great addition (26.12.2014)
First of all, the product came well packed and arrived very fast.
I install this on a 1894 in 44 mag, 20" micro groove. I did have to modify the front hole(with a round file), small (1/3-1/2 mm) for everything to fit just right. I got it very tight. After getting the hole move forward to fit on pillar, I trimmed the ring nut and also the recess just enough for ring nut to fit(with a Dremmel and stones). I took a black marker to all parts modified. I also used instructions on line @ SX.
I already had ghost rings, but the screw to install this is not included. I contacted SX, and they sent one out for free. Ordered it on the 22nd and got it today, The 26th.
This looks great. I will be able to use all sorts of optics on this, like a reflex, red dot, or various scopes.
My first mount will be a Leupold 1.5x5x20. I have ordered some Warne med rings(QD). I have estimated just under a 1/2" rise needed to keep ghost ring sight.
If you are going to use just one type of optic, Warne offers mounting plates for there rings, But this rail is very cool looking.
.
Easy to install(23.10.2009)
Rail mounted and aligned well. All required parts were included. (plastic drift punch, thread compound, allen wrench, screws, etc) Just needed a hammer and the proper fitting screwdriver. Written instructions were a little vague; but, understandable.
Flexible mount system, well made(27.10.2009)
Nice system. Gives more ring locations to accommodate different length scope tubes and ring types, plus accomdates back up metallic sights. Installation was easy, a drop on.
XS Sight Systems Service(05.08.2015)
Talked with the service technician about my two issues with the rail. She was very knowledgeable and professional. She recommended remedial actions and sent a replacement part. It was nice to talk to someone that really knew their job and product.