Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Altro...
Solido & leggera per il montaggio degli ambiti & altre ottiche
Guida di montaggio stile Weaver ambito corrisponde il contorno superiore su tutti Mossberg 500/590 e 835 modelli per un'installazione durevole, no-gap. Tenuta da quattro, viti di macchina di 8-40 tpi che resistere al rinculo senza deformazione o strapparsi. Ricavati dal leggero in alluminio estruso e anodizzato per abbinare l'anodizzato o nero verniciato Mossberg ricevitori. Accetta tutti i montaggi di ambito stile Weaver e accessori.
specifiche: alluminio, nero, anodizzato finitura. 5"(12.7 cm) lungh. 2 oz (56,6 g) WT include (4), 8-40 tpi viti di montaggio. Installazione richiede foratura e maschiatura su presto modello Mossberg 500.
Altro...
Punteggi dei clienti per HAVLIN MOSSBERG SCOPE RAIL
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!
N. prodotto: 100002901 HAVLIN MOSSBERG SCOPE RAIL Parti Fabbricante: M500R8 Guida di montaggio stile Weaver ambito corrisponde il contorno superiore su tutti Mossberg 500/590 e 835 modelli per un'installazione durevole, no-gap. Tenuta da quattro, viti di macchina di 8-40 tpi che resistere al rinculo senza deformazione o strapparsi. Ricavati dal leggero in alluminio estruso e anodizzato per abbinare l'anodizzato o nero verniciato Mossberg ricevitori. Accetta tutti i montaggi di ambito stile Weaver e accessori.
38.9CHF0CHF 38.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: MossbergColore: BlackMateriale: AlluminioModello: 500, 590, 835Numero di basi: 1 pezzoTipo: Basi tattiche
Adatto per:
Mossberg
Colore:
Black
Materiale:
Alluminio
Modello:
500,590,835
Numero di basi:
1 pezzo
Tipo:
Basi tattiche
Peso della spedizione: 0.045kgAltezza di spedizione: 13mmLarghezza di spedizione: 66mmLunghezza di spedizione: 145mm
Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Altro...
Solido & leggera per il montaggio degli ambiti & altre ottiche
Guida di montaggio stile Weaver ambito corrisponde il contorno superiore su tutti Mossberg 500/590 e 835 modelli per un'installazione durevole, no-gap. Tenuta da quattro, viti di macchina di 8-40 tpi che resistere al rinculo senza deformazione o strapparsi. Ricavati dal leggero in alluminio estruso e anodizzato per abbinare l'anodizzato o nero verniciato Mossberg ricevitori. Accetta tutti i montaggi di ambito stile Weaver e accessori.
specifiche: alluminio, nero, anodizzato finitura. 5"(12.7 cm) lungh. 2 oz (56,6 g) WT include (4), 8-40 tpi viti di montaggio. Installazione richiede foratura e maschiatura su presto modello Mossberg 500.
Altro...
Punteggi dei clienti per HAVLIN MOSSBERG SCOPE RAIL
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!