Machined from a special copper-free alloy that’s as gentle on the bore as brass, while it eliminates false indications of blue copper fouling on the patch. Holds the patch tight in two places, doubling the effective cleaning area. Reverse taper self-guides into bore.
Lavorate da una speciale lega di rame-libero è delicata sul foro come ottone, mentre elimina false indicazioni di fouling rame blu toppa. Tiene stretto la patch in due punti, raddoppiando l'area efficace di pulizia. Cono inverso auto-guide nel foro.
Specifiche: proprietarie in lega di rame-libero. Circa 21 ⁄ 4"(5,7 cm) lungo. .17 Cal. -filettature maschio 5-40. Cal,22 &,30 -8-32 filetti maschi.
Altro...
Punteggi dei clienti per BORE TECH 30 CALIBER PROOF POSITIVE JAG
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
A really nice jag(10.07.2011)
A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.
First off, it doesn't give a copper indication. Great. Works as advertised.
Second, the alloy used won't scratch the bore, at least from what I've seen.
But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!
I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)
The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.
One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.
Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.
Too big for .308 bore(01.08.2015)
Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.
N. prodotto: 509000162 BORE TECH 30 CALIBER PROOF POSITIVE JAG Parti Fabbricante: BTAJ-30-00667739980326 Lavorate da una speciale lega di rame-libero è delicata sul foro come ottone, mentre elimina false indicazioni di fouling rame blu toppa. Tiene stretto la patch in due punti, raddoppiando l'area efficace di pulizia. Cono inverso auto-guide nel foro.
22.9CHF32CHF 22.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Calibro:
30 Caliber
Peso della spedizione: 0.014kgAltezza di spedizione: 18mmLarghezza di spedizione: 56mmLunghezza di spedizione: 102mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 509000132 BORE TECH 22 CALIBER PROOF POSITIVE JAG Parti Fabbricante: BTAJ-22-CF667739980296 Lavorate da una speciale lega di rame-libero è delicata sul foro come ottone, mentre elimina false indicazioni di fouling rame blu toppa. Tiene stretto la patch in due punti, raddoppiando l'area efficace di pulizia. Cono inverso auto-guide nel foro.
22.9CHF0CHF 22.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Machined from a special copper-free alloy that’s as gentle on the bore as brass, while it eliminates false indications of blue copper fouling on the patch. Holds the patch tight in two places, doubling the effective cleaning area. Reverse taper self-guides into bore.
Lavorate da una speciale lega di rame-libero è delicata sul foro come ottone, mentre elimina false indicazioni di fouling rame blu toppa. Tiene stretto la patch in due punti, raddoppiando l'area efficace di pulizia. Cono inverso auto-guide nel foro.
Specifiche: proprietarie in lega di rame-libero. Circa 21 ⁄ 4"(5,7 cm) lungo. .17 Cal. -filettature maschio 5-40. Cal,22 &,30 -8-32 filetti maschi.
Altro...
Punteggi dei clienti per BORE TECH 30 CALIBER PROOF POSITIVE JAG
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3
A really nice jag(10.07.2011)
A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.
First off, it doesn't give a copper indication. Great. Works as advertised.
Second, the alloy used won't scratch the bore, at least from what I've seen.
But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!
I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)
The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.
One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.
Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.
Too big for .308 bore(01.08.2015)
Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.