Aluminum accessory rail bolts to the underside of the standard factory plastic handguard to enable fast, easy mounting of lights, vertical grips, bipods, and other accessories. The “UFIR” features 11 cross slots machined to MIL-STD-1913 specifications to provide a variety of accessory options depending on the mission. Attaches to the underside of USGI-style plastic AR-15/M16 rifle or M4-style carbine handguard using the included mounting hardware.
SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black. 45⁄8" (11.7cm) long. Steel mounting hardware included.
Altro...
Bulloni accessori Rail Handguard di plastica fabbrica
Ferroviario accessorio alluminio bulloni alla parte inferiore del handguard di plastica fabbrica standard per consentire un montaggio veloce, facile di luci, impugnature verticali, bipiede e altri accessori. Il "UFIR" dispone di 11 slot croce lavorati alle specifiche MIL-STD-1913 per fornire una varietà di opzioni accessorie a seconda della missione. Si attacca alla parte inferiore di plastica stile USGI fucile AR-15/M16 o stile M4 carbine handguard utilizzando l'hardware di montaggio incluso.
Specifiche: 6061 T6 alluminio, mil-spec III tipo hardcoat anodizzato, nero opaco. 45 ⁄ 8"(11.7 cm) lungo. Acciaio montaggio hardware incluso.
Altro...
Punteggi dei clienti per GG&G DIRECT THREAD UFIR RAIL PICATINNY ALUMINUM BLACK 4.5"
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Fantastic add-on!(01.04.2015)
I am one of the few out there who isn't trying to make my AR15 look like something from Star Wars. I strive to keep my weapons safe, simple and ready to use. This rail does that for me. I keep my original handguard and now have a foregrip. My only small gripe was that one of the nut-serts was only partially threaded. I had to remove it, place it in a vice and finish threading it. This is why I gave this four stars. And By-the-way, yes it's a bit harder to install on Colt LE6920 but can be done. My Colt is a bit more safe, comfortable, and keeps the original Colt look.
Perfect for adding a fore grip to my Ruger AR-556 without making it too Hollywood. Mounted it to CAR 'Skinny" handguards (Ruger factory handguards have no heat shield) with no problem. Very happy!
This product is advertised to work on the bottom handguard and it certainly does perfectly. It has been dehorned of sharp edges and is comfortable to hold while shooting. It is very solid and useful for many additions to the AR15 handguard.
One comment is that if 3 shorter screws were sent with the unit, it could be used on the top handguard as well. The protruding screw ends hit the gas tube and so it can't fasten on the top, but just by eyeballing the situation, if the proper length screws were used, it would work as a top rail as well, IMO.
N. prodotto: 336000037 GG&G DIRECT THREAD UFIR RAIL PICATINNY ALUMINUM BLACK 4.5" Parti Fabbricante: GGG1055813157000355 Ferroviario accessorio alluminio bulloni alla parte inferiore del handguard di plastica fabbrica standard per consentire un montaggio veloce, facile di luci, impugnature verticali, bipiede e altri accessori. Il "UFIR" dispone di 11 slot croce lavorati alle specifiche MIL-STD-1913 per fornire una varietà di opzioni accessorie a seconda della missione. Si attacca alla parte inferiore di plastica stile USGI fucile AR-15/M16 o stile M4 carbine handguard utilizzando l'hardware di montaggio incluso.
45.9CHF16CHF 45.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: AR-15Colore: BlackLunghezza: 4-1/2 polliciMateriale: AlluminioTipo: PicatinnyTipo: Direct Thread
Adatto per:
AR-15
Colore:
Black
Lunghezza:
4-1/2 pollici
Materiale:
Alluminio
Tipo:
Picatinny
Tipo:
Direct Thread
Peso della spedizione: 0.045kgAltezza di spedizione: 20mmLarghezza di spedizione: 69mmLunghezza di spedizione: 150mm
Aluminum accessory rail bolts to the underside of the standard factory plastic handguard to enable fast, easy mounting of lights, vertical grips, bipods, and other accessories. The “UFIR” features 11 cross slots machined to MIL-STD-1913 specifications to provide a variety of accessory options depending on the mission. Attaches to the underside of USGI-style plastic AR-15/M16 rifle or M4-style carbine handguard using the included mounting hardware.
SPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black. 45⁄8" (11.7cm) long. Steel mounting hardware included.
Altro...
Bulloni accessori Rail Handguard di plastica fabbrica
Ferroviario accessorio alluminio bulloni alla parte inferiore del handguard di plastica fabbrica standard per consentire un montaggio veloce, facile di luci, impugnature verticali, bipiede e altri accessori. Il "UFIR" dispone di 11 slot croce lavorati alle specifiche MIL-STD-1913 per fornire una varietà di opzioni accessorie a seconda della missione. Si attacca alla parte inferiore di plastica stile USGI fucile AR-15/M16 o stile M4 carbine handguard utilizzando l'hardware di montaggio incluso.
Specifiche: 6061 T6 alluminio, mil-spec III tipo hardcoat anodizzato, nero opaco. 45 ⁄ 8"(11.7 cm) lungo. Acciaio montaggio hardware incluso.
Altro...
Punteggi dei clienti per GG&G DIRECT THREAD UFIR RAIL PICATINNY ALUMINUM BLACK 4.5"
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Fantastic add-on!(01.04.2015)
I am one of the few out there who isn't trying to make my AR15 look like something from Star Wars. I strive to keep my weapons safe, simple and ready to use. This rail does that for me. I keep my original handguard and now have a foregrip. My only small gripe was that one of the nut-serts was only partially threaded. I had to remove it, place it in a vice and finish threading it. This is why I gave this four stars. And By-the-way, yes it's a bit harder to install on Colt LE6920 but can be done. My Colt is a bit more safe, comfortable, and keeps the original Colt look.
Perfect for adding a fore grip to my Ruger AR-556 without making it too Hollywood. Mounted it to CAR 'Skinny" handguards (Ruger factory handguards have no heat shield) with no problem. Very happy!
This product is advertised to work on the bottom handguard and it certainly does perfectly. It has been dehorned of sharp edges and is comfortable to hold while shooting. It is very solid and useful for many additions to the AR15 handguard.
One comment is that if 3 shorter screws were sent with the unit, it could be used on the top handguard as well. The protruding screw ends hit the gas tube and so it can't fasten on the top, but just by eyeballing the situation, if the proper length screws were used, it would work as a top rail as well, IMO.