The Brownells Small Dovetail Sight Punch is designed to help with the installation, removal, and adjustment of front and rear small handgun sights. Unique triangular punch faces and heavy duty bodies create a great working tool for gunsmiths. The Small Dovetail Sight Punch has a base width of approximately 0.230".
Altro...
Il punzone vista Brownells piccolo a coda di rondine è progettato per aiutare con l'installazione, la rimozione e la regolazione della parte anteriore e posteriore pistola piccole attrazioni. Unico punzone triangolare facce e corpi pesanti creano un grande strumento di lavoro per armaioli. Il piccolo pugno di vista a coda di rondine ha una larghezza di base di circa 0,230".
Altro...
Punteggi dei clienti per BROWNELLS SMALL DOVETAIL SIGHT PUNCH
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 2
Interesting idea but limited in use.(08.06.2015)
I thought the idea of a brass punch might be cool to prevent marring up tight dovetail sights. Well, it works pretty good on sights that aren't too tight. That's the sweet spot. But it will leave brass marks the tighter fit the sights are. For sights like the Shield, don't bother. I ended up compressing the punch a bit and had to sand it back down on the grinder to be usable. Use a steel punch instead and give it a couple of solid whacks instead. The other minor issue is that the "small" isn't small enough for a lot of sights.
Almost useful (08.05.2016)
It worked well on the few guns where we found it was applicable. If one's clientele is limited to these and the guns are willing to give up their death grip on their sights by all means .....
Don't waste your time or money.(24.01.2018)
Too large for front sight cut on 1911; had to grind it down to fit and then corner of the punch broke off. Good idea that doesn't work.
useless(11.06.2018)
I wish it would work its to large for any front site dove tail I own. You need to modify it to fit smaller sights. Whats the point.
N. prodotto: 080001230 BROWNELLS SMALL DOVETAIL SIGHT PUNCH Il punzone vista Brownells piccolo a coda di rondine è progettato per aiutare con l'installazione, la rimozione e la regolazione della parte anteriore e posteriore pistola piccole attrazioni. Unico punzone triangolare facce e corpi pesanti creano un grande strumento di lavoro per armaioli. Il piccolo pugno di vista a coda di rondine ha una larghezza di base di circa 0,230".
19.9CHF56CHF 19.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Dimensioni:
.230
Materiale:
Brass
Tipo:
Drift
Peso della spedizione: 0.045kgAltezza di spedizione: 8mmLarghezza di spedizione: 3mmLunghezza di spedizione: 76mm
The Brownells Small Dovetail Sight Punch is designed to help with the installation, removal, and adjustment of front and rear small handgun sights. Unique triangular punch faces and heavy duty bodies create a great working tool for gunsmiths. The Small Dovetail Sight Punch has a base width of approximately 0.230".
Altro...
Il punzone vista Brownells piccolo a coda di rondine è progettato per aiutare con l'installazione, la rimozione e la regolazione della parte anteriore e posteriore pistola piccole attrazioni. Unico punzone triangolare facce e corpi pesanti creano un grande strumento di lavoro per armaioli. Il piccolo pugno di vista a coda di rondine ha una larghezza di base di circa 0,230".
Altro...
Punteggi dei clienti per BROWNELLS SMALL DOVETAIL SIGHT PUNCH
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 2
Interesting idea but limited in use.(08.06.2015)
I thought the idea of a brass punch might be cool to prevent marring up tight dovetail sights. Well, it works pretty good on sights that aren't too tight. That's the sweet spot. But it will leave brass marks the tighter fit the sights are. For sights like the Shield, don't bother. I ended up compressing the punch a bit and had to sand it back down on the grinder to be usable. Use a steel punch instead and give it a couple of solid whacks instead. The other minor issue is that the "small" isn't small enough for a lot of sights.
Almost useful (08.05.2016)
It worked well on the few guns where we found it was applicable. If one's clientele is limited to these and the guns are willing to give up their death grip on their sights by all means .....
Don't waste your time or money.(24.01.2018)
Too large for front sight cut on 1911; had to grind it down to fit and then corner of the punch broke off. Good idea that doesn't work.
useless(11.06.2018)
I wish it would work its to large for any front site dove tail I own. You need to modify it to fit smaller sights. Whats the point.