Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

AMERICAN DEFENSE MANUFACTURING
AIMPOINT LOW PROFILE MOUNT

818503010088 100003652
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

239.9 239.9 1 CHF
N. prodotto: 100003652
AMERICAN DEFENSE MANUFACTURING AIMPOINT LOW PROFILE MOUNT
Parti Fabbricante: AD68LSTD 818503010088 Chiusura a leva sistema morsetti solidamente alla ferrovia di flattop a sgancio rapido e non funzionerà sciolto anche sotto rinculo pesante — la forza più agendo sulla leva, il più stretto si blocca. Premere la linguetta di rilascio per oscillare la leva aperta, e il Monte si solleva facilmente il fucile. Non vestibilità regolabile con un cacciavite a testa piatta o persino una moneta per un ultra-sicuro, scivola su quasi qualsiasi stile Weaver o Picatinny rail, tra cui sopra - o sotto-dimensioni commerciali rotaie. Leva può essere configurato per bloccare alla parte anteriore o posteriore a seconda delle preferenze dell'operatore. Grande barra di blocco sul lato del Monte si innesta la quantità massima di spazio ferroviario, mentre il bullone e due alette di bloccaggio integrale garantiscono solide fidanzamento di slot ferroviari per impedire il movimento sotto rinculo. Viti a testa esagonale cinque pesanti in acciaio (tre su due top, fondo) morsetto verticalmente divisa anello metà insieme. Ritagli ai lati dell'anello e nella base di riducono il peso senza sacrificare la resistenza. Annuncio-68 Aimpoint è stata progettata per ottica Aimpoint o simili congegni di mira che richiedono un singolo, anello di 30mm, compresi il Comp C3 e serie M2/ML2/M3/ML3. Disponibile in quattro configurazioni per soddisfare una varietà di esigenze di montaggio. Basso posiziona l'ambito più vicino possibile alla parte superiore del ricevitore.
239.9 CHF 1 CHF 239.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Altezza: .520'' Colore: Opaco Black Diametro del tubo dell'ottica: 30mm Dimensioni: Basso Finitura: Nero Numero di basi: 1 pezzo Tipo: Low Profile

Caratteristiche

Adatto per: AR-15 Altezza: .520'' Colore: Opaco Black Diametro del tubo dell'ottica: 30mm Dimensioni: Basso Finitura: Nero Numero di basi: 1 pezzo Tipo: Low Profile Peso della spedizione: 0.159kg Altezza di spedizione: 64mm Larghezza di spedizione: 89mm Lunghezza di spedizione: 145mm

Dettagli dell'elemento

Made in Usa



Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

Newsletter