Fits GI-Pattern Dovetail; Rugged Construction For Daily Carry
Fixed rear sight fits the GI-pattern dovetail and provides an improved sight picture while maintaining your pistol’s stock appearance. An extra-wide .135" notch puts more light around the front blade to aid in faster target acquisition. 50 lpi horizontal serrations on the rear face help eliminate glare. A setscrew locks the sight into the dovetail for a secure installation that won’t shoot loose, yet still allows drift adjustments for windage. Rounded corners help resist snagging during the draw from concealment. Precision machined from steel barstock to look good and handle the knocks of daily carry. The 1911 Retro Rear U Notch Sight is made to the same specs as the standard, square notch rear sight but instead features a .138" U notch.
SPECS: Steel, matte black finish. .344" (.87cm) length, .622" (1.8cm) base width, and .317" (.8cm) overall height. .135" (.34cm) wide x .135" high notch. Fits GI-pattern 1911 slide dovetail.
Altro...
Si inserisce la GI-modello a coda di rondine; Robusta costruzione per portare ogni giorno
Tacca di mira fissa adatta a coda di rondine GI-modello e fornisce un'immagine di vista migliorata pur mantenendo l'aspetto dipinga la pistola. Un ampissimo. 135" tacca mette più luce intorno la lama anteriore per facilitare l'acquisizione del bersaglio più veloce. 50 lpi dentellatura orizzontale sulla faccia posteriore contribuire ad eliminare l'abbagliamento. Serrature di una vite prigioniera la vista in a coda di rondine per un'installazione sicura che non sparerò sciolto, ancora ancora permette regolazioni drift per derivazione. Angoli arrotondati aiutano a resistere sbavatura durante il sorteggio da occultamento. Precisione lavorata da barra in acciaio per guardare bene e gestire i colpi di portare ogni giorno. Il 1911 retrò tacca U tacca di mira è fatto per le stesse specifiche come la tacca di mira tacca standard, quadrato ma presenta invece un. 138" U tacca.
Specifiche: opaco, acciaio finitura di nero.. 344"(.87cm) lunghezza,. 622" (1.8 cm) larghezza, di base e. 317"(.8cm) altezza complessiva.. 135" (.34cm) x larghezza. 135" alto tacca. Si inserisce la GI-modello 1911 slitta a coda di rondine.
Altro...
Punteggi dei clienti per HARRISON DESIGN & CONSULTING 1911 RETRO REAR SIGHT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Fantastic(03.04.2010)
I had John Harrison install this sight and a blended dovetail wide front sight on an otherwise stock M1911A1 to maintain the weapon's classic, functional lines. It helps immensely to have a very good, visible sight picture while maintaining a clean "As issued" or "OEM out-of-the box" profile.
The sights are both solid and functional.
Excellent Sight(18.06.2012)
Purchased a Colt Series 80 which arrived with a loose staked front sight. Sent it in to Colt to have it repaired and decided to have them replace the rear sight as well with the Harrison Design Retro Rear. I'm becoming more of a minimalist and this sight does an excellent job of maintaining the classic look of the 1911 while also providing a great set of sights to look through which function as good as they look once installed. Very Solid, smooth, and rugged.
N. prodotto: 100004784 HARRISON DESIGN & CONSULTING 1911 RETRO REAR SIGHT Parti Fabbricante: HD003S Tacca di mira fissa adatta a coda di rondine GI-modello e fornisce un'immagine di vista migliorata pur mantenendo l'aspetto dipinga la pistola. Un ampissimo. 135" tacca mette più luce intorno la lama anteriore per facilitare l'acquisizione del bersaglio più veloce. 50 lpi dentellatura orizzontale sulla faccia posteriore contribuire ad eliminare l'abbagliamento. Serrature di una vite prigioniera la vista in a coda di rondine per un'installazione sicura che non sparerò sciolto, ancora ancora permette regolazioni drift per derivazione. Angoli arrotondati aiutano a resistere sbavatura durante il sorteggio da occultamento. Precisione lavorata da barra in acciaio per guardare bene e gestire i colpi di portare ogni giorno. Il 1911 retrò tacca U tacca di mira è fatto per le stesse specifiche come la tacca di mira tacca standard, quadrato ma presenta invece un. 138" U tacca.
64.9CHF11CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: 1911Colore delle mire: BlackModello: Government, Commander, OfficersTipo: Wide-Notch
Adatto per:
1911
Colore delle mire:
Black
Modello:
Commander,Government,Officers
Tipo:
Wide-Notch
Peso della spedizione: 0.045kgAltezza di spedizione: 25mmLarghezza di spedizione: 102mmLunghezza di spedizione: 152mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100013387 HARRISON DESIGN & CONSULTING 1911 RETRO REAR SIGHT U NOTCH Parti Fabbricante: HD003U Tacca di mira fissa adatta a coda di rondine GI-modello e fornisce un'immagine di vista migliorata pur mantenendo l'aspetto dipinga la pistola. Un ampissimo. 135" tacca mette più luce intorno la lama anteriore per facilitare l'acquisizione del bersaglio più veloce. 50 lpi dentellatura orizzontale sulla faccia posteriore contribuire ad eliminare l'abbagliamento. Serrature di una vite prigioniera la vista in a coda di rondine per un'installazione sicura che non sparerò sciolto, ancora ancora permette regolazioni drift per derivazione. Angoli arrotondati aiutano a resistere sbavatura durante il sorteggio da occultamento. Precisione lavorata da barra in acciaio per guardare bene e gestire i colpi di portare ogni giorno. Il 1911 retrò tacca U tacca di mira è fatto per le stesse specifiche come la tacca di mira tacca standard, quadrato ma presenta invece un. 138" U tacca.
64.9CHF5CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: 1911Colore delle mire: BlackModello: Government, Commander, OfficersTipo: U-Notch
Fits GI-Pattern Dovetail; Rugged Construction For Daily Carry
Fixed rear sight fits the GI-pattern dovetail and provides an improved sight picture while maintaining your pistol’s stock appearance. An extra-wide .135" notch puts more light around the front blade to aid in faster target acquisition. 50 lpi horizontal serrations on the rear face help eliminate glare. A setscrew locks the sight into the dovetail for a secure installation that won’t shoot loose, yet still allows drift adjustments for windage. Rounded corners help resist snagging during the draw from concealment. Precision machined from steel barstock to look good and handle the knocks of daily carry. The 1911 Retro Rear U Notch Sight is made to the same specs as the standard, square notch rear sight but instead features a .138" U notch.
SPECS: Steel, matte black finish. .344" (.87cm) length, .622" (1.8cm) base width, and .317" (.8cm) overall height. .135" (.34cm) wide x .135" high notch. Fits GI-pattern 1911 slide dovetail.
Altro...
Si inserisce la GI-modello a coda di rondine; Robusta costruzione per portare ogni giorno
Tacca di mira fissa adatta a coda di rondine GI-modello e fornisce un'immagine di vista migliorata pur mantenendo l'aspetto dipinga la pistola. Un ampissimo. 135" tacca mette più luce intorno la lama anteriore per facilitare l'acquisizione del bersaglio più veloce. 50 lpi dentellatura orizzontale sulla faccia posteriore contribuire ad eliminare l'abbagliamento. Serrature di una vite prigioniera la vista in a coda di rondine per un'installazione sicura che non sparerò sciolto, ancora ancora permette regolazioni drift per derivazione. Angoli arrotondati aiutano a resistere sbavatura durante il sorteggio da occultamento. Precisione lavorata da barra in acciaio per guardare bene e gestire i colpi di portare ogni giorno. Il 1911 retrò tacca U tacca di mira è fatto per le stesse specifiche come la tacca di mira tacca standard, quadrato ma presenta invece un. 138" U tacca.
Specifiche: opaco, acciaio finitura di nero.. 344"(.87cm) lunghezza,. 622" (1.8 cm) larghezza, di base e. 317"(.8cm) altezza complessiva.. 135" (.34cm) x larghezza. 135" alto tacca. Si inserisce la GI-modello 1911 slitta a coda di rondine.
Altro...
Punteggi dei clienti per HARRISON DESIGN & CONSULTING 1911 RETRO REAR SIGHT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
Fantastic(03.04.2010)
I had John Harrison install this sight and a blended dovetail wide front sight on an otherwise stock M1911A1 to maintain the weapon's classic, functional lines. It helps immensely to have a very good, visible sight picture while maintaining a clean "As issued" or "OEM out-of-the box" profile.
The sights are both solid and functional.
Excellent Sight(18.06.2012)
Purchased a Colt Series 80 which arrived with a loose staked front sight. Sent it in to Colt to have it repaired and decided to have them replace the rear sight as well with the Harrison Design Retro Rear. I'm becoming more of a minimalist and this sight does an excellent job of maintaining the classic look of the 1911 while also providing a great set of sights to look through which function as good as they look once installed. Very Solid, smooth, and rugged.