Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Altro...
Monte solida
Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
Specifiche: 6061 T6 alluminio, hardcoat T3 mil-spec anodizzato, nero opaco. Altezza misurata dalla parte superiore della rotaia alla parte inferiore del corpo di scope -. 31"(7,8 mm). Si inserisce l'Aimpoint Micro serie red dot luoghi solo.
Altro...
Punteggi dei clienti per AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CO-WITNESS MOUNT STANDARD LEVER BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
works great with Sig Romeo5(05.11.2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09.01.2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30.08.2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21.11.2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.
N. prodotto: 100017113 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CO-WITNESS MOUNT STANDARD LEVER BLACK Parti Fabbricante: ADT110STD818503010422 Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
Colore:
Opaco Black
Finitura:
Opaco Black
Tipo:
Quick Detach
Peso della spedizione: 0.132kgAltezza di spedizione: 51mmLarghezza di spedizione: 51mmLunghezza di spedizione: 127mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100004024 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK Parti Fabbricante: ADT1LSTD818503010385 Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
174.9CHF2CHF 174.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Universal RiflesColore: Opaco BlackMateriale: AlluminioNumero di basi: 1 pezzoTipo: Basi tattiche
Colore:
Opaco Black
Tipo:
Basi tattiche
Peso della spedizione: 0.068kgAltezza di spedizione: 58mmLarghezza di spedizione: 58mmLunghezza di spedizione: 117mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 000004423 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CAS-V MOUNT STANDARD LEVER BLACK Parti Fabbricante: ADT1CASVSTD818503010408 Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
179.9CHF8CHF 179.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Colore: Opaco BlackFits / Used For: Aimpoint Micro
Colore:
Opaco Black
Peso della spedizione: 0.113kgAltezza di spedizione: 53mmLarghezza di spedizione: 57mmLunghezza di spedizione: 121mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100017114 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOWER 1/3 COWITNESS MOUNT STD LEVER BLK Parti Fabbricante: ADT111STD818503011184 Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
Colore:
Opaco Black
Finitura:
Opaco Black
Tipo:
Quick Detach
Peso della spedizione: 0.129kgAltezza di spedizione: 57mmLarghezza di spedizione: 64mmLunghezza di spedizione: 121mm
Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Altro...
Monte solida
Leggero, scollegamento rapido Monte consente di installare e rimuovere il punto di serie rosso Aimpoint Micro in pochi secondi. Sostituisce la fabbrica originale base e assicura alla vista Aimpoint con quattro viti Torx ® ad alta resistenza, in acciaio per una stretta tengono sotto rinculo pesante. Supporti T-1 rosso puntino all'altezza minima.
Specifiche: 6061 T6 alluminio, hardcoat T3 mil-spec anodizzato, nero opaco. Altezza misurata dalla parte superiore della rotaia alla parte inferiore del corpo di scope -. 31"(7,8 mm). Si inserisce l'Aimpoint Micro serie red dot luoghi solo.
Altro...
Punteggi dei clienti per AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 CO-WITNESS MOUNT STANDARD LEVER BLACK
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
works great with Sig Romeo5(05.11.2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09.01.2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30.08.2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21.11.2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.