Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
817272000000 100500300
Prevents Threading Rimfire Suppressors On Too Far
SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads. If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle. Shortens the thread area while maintaining concentricity Gives your rimfire suppressor a solid shoulder Cleans up aesthetics of the rifle by hiding excess threads Machined steel, black oxide finish SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!  
33.9 33.9 1 CHF
Référence: 100500300
SILENCERCO ADAPTER 1/2X28 THREAD SPACER
Ref Fabricant: AC114 817272000000 Entretoise de fil fusil de SilencerCo 1/2"-28 corrige le problème d’un baril de.22 rimfire flletage museau trop longs. .22 rimfire et à percussion centrale sons suppresseurs de calibre ont le même pas du filetage 1/2"-28, mais la partie filetée du museau est plus longue sur les fusils à percussion centrale. Fabricants de goof plus souvent que vous attendez et donner rimfire muselières filetage à percussion centrale-longueur vers le haut. Si une muselière rimfire a une trop longue filetée de zone, vous courez le risque d’endommager votre suppresseur serrant trop loin sur le tambour. À tout le moins, le suppresseur de ne peut pas être positionné correctement pour un fonctionnement optimal. L’entretoise de filetage SilencerCo 1/2"-28 fusil est la solution. Il porte sur la longueur de fil, tout en positionnant correctement vos suppresseur de percussion annulaire sur le museau. Raccourcit la zone thread tout en conservant la concentricité donne votre suppresseur de rimfire une épaule solide nettoie esthétique de la carabine en masquant les excès filetage usiné en acier, oxyde noir finition remplissages de fusil Thread entretoise de SilencerCo 1/2 "x 28 le fossé qui serait autrement laissé entre le silencieux et l’épaule de thread. Vérifiez votre fusil aujourd'hui !
33.9 CHF 0 CHF 33.90 *
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques: Filetage: 1/2-28 Finition: Noir

Caractéristiques

Filetage: 1/2-28 Finition: Noir Poids du colis: 0.068kg Hauteur d'expédition: 5mm Largeur d'expédition: 99mm Longueur d'expédition: 132mm

Détails de l'article

Fabriqué au USA



Prevents Threading Rimfire Suppressors On Too Far
SilencerCo’s 1/2"-28 Rifle Thread Spacer corrects the problem of a .22 rimfire barrel with muzzle threads that are too long. .22 caliber rimfire and centerfire sound suppressors have the same thread pitch 1/2"-28, but the threaded portion of the muzzle is longer on centerfire rifles. Manufacturers goof up more often than you’d expect and give rimfire muzzles centerfire-length threads. If a rimfire muzzle has an over-long threaded area, you run the risk of damaging your suppressor by tightening it too far onto the barrel. At the least, the suppressor might not be positioned correctly for optimum operation. The SilencerCo 1/2"-28 Rifle Thread Spacer is the solution. It covers the excess threads, while properly positioning your rimfire suppressor on the muzzle. Shortens the thread area while maintaining concentricity Gives your rimfire suppressor a solid shoulder Cleans up aesthetics of the rifle by hiding excess threads Machined steel, black oxide finish SilencerCo’s 1/2"x28 Rifle Thread Spacer fills the gap that would otherwise be left between the silencer and thread shoulder. Check your rifle today!  
Newsletter