Modified post front sight with vertical white line insert is fast and easy to see in all light conditions. Variety of heights to fit a wide selection of rifles.
SPECS: Steel, blue, matte finish. Fits nominal 3⁄8"x.375" dovetail. 100" (2.54mm) wide post has .040" (1mm) wide stripe. Heights for .100" wide posts are listed in chart. Heights measured from top of blade to bottom of dovetail. Includes Test Post Sight.
Altro...
Modificate post mirino con inserto riga bianca verticale è veloce e facile da vedere in ogni condizione di luce. Varietà di altezze per adattarsi a un'ampia selezione di fucili.
Specifiche: acciaio, blu, con finitura opaca. Misura nominale 3 ⁄ 8"x.375" a coda di rondine. 100"(2.54 mm) ampia post ha. 040" (1 mm) banda larga. Altezze per. 100" ampia post sono elencati nella tabella. Altezze misurate dalla parte superiore della lama verso il basso della coda di rondine. Comprende Test Post vista.
Altro...
Punteggi dei clienti per XS SIGHT SYSTEMS .100" WIDE X .300" HIGH
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
Excellent sight.(12.02.2013)
Very bright and visible, sharper than a fiber-optic bead. Easy to install on my Rem 700 ADL.
Beautifully Made.(24.02.2015)
I followed the installation directions (mostly), and had this sight mounted in under 30 seconds. It is beautifully made, and I installed it after filing with two passes to the bottom edge, using a "0" file.
The white line jumps out on all backgrounds and is easily seen even in a low light setting.
I will shoot it next month, after the snow melts.
best front sight for my Marlin(11.07.2015)
I've tried four front sights with an aperture rear sight on my Marlin 1894c:
- original brass colored bead
- Skinner black post
- Marbles fiber optic
- XS....
Of them all, I've found that the XS sight gives me the best precision and is second only to the fiber optic in visibility.
It also has clean lines that don't detract from a lever-gun's appearance (a fiber optic doesn't quite look right on an old-school gun).
And I like how only the post/blade itself extends above the dovetail slot, so there is nothing else cluttering up the sight picture.
My only complaint is that it was not a snug fit in the dovetail slot, and slide in and out way to easily. I ended up using tread lock to keep it in place.
XS post front sights are great(09.04.2016)
I keep a supply of these on hand. I have put them on Win. 94 30-30, Marlin 336 30-30, Marlin Camp Carbine .45, and an old Marlin bolt action tube fed .22 rifle. Match them up with Marble's Bullseye rear sight and you have a poor mans ghost right set up that is easy to install and inexpensive compared to the rest of the market. Great for low light, snap shooting, and moving targets. They are also easier on older eyes too.
Very Clear (27.07.2015)
I use this with a Williams Ace in the Hole peep sight on my 870 deer gun, works very well. The sight picture is much better than using a bead or fiber optic bead because of the constant thickness and white line vs the taper of the bead sight. I find it clearer since my vision isn't perfect anymore. It installed very easily no filing required.
N. prodotto: 006113300 XS SIGHT SYSTEMS .100" WIDE X .300" HIGH Parti Fabbricante: 112006A3002647533002387 Modificate post mirino con inserto riga bianca verticale è veloce e facile da vedere in ogni condizione di luce. Varietà di altezze per adattarsi a un'ampia selezione di fucili.
59.9CHF10CHF 59.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Universal RiflesAltezza: .300Colore: Black
Adatto per:
Universal Rifles
Altezza:
.300
Colore:
Black
Peso della spedizione: 0.068kgAltezza di spedizione: 33mmLarghezza di spedizione: 122mmLunghezza di spedizione: 191mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 006113350 XS SIGHT SYSTEMS .100" WIDE X .350" HIGH Parti Fabbricante: 112006A3502647533002400 Modificate post mirino con inserto riga bianca verticale è veloce e facile da vedere in ogni condizione di luce. Varietà di altezze per adattarsi a un'ampia selezione di fucili.
Modified post front sight with vertical white line insert is fast and easy to see in all light conditions. Variety of heights to fit a wide selection of rifles.
SPECS: Steel, blue, matte finish. Fits nominal 3⁄8"x.375" dovetail. 100" (2.54mm) wide post has .040" (1mm) wide stripe. Heights for .100" wide posts are listed in chart. Heights measured from top of blade to bottom of dovetail. Includes Test Post Sight.
Altro...
Modificate post mirino con inserto riga bianca verticale è veloce e facile da vedere in ogni condizione di luce. Varietà di altezze per adattarsi a un'ampia selezione di fucili.
Specifiche: acciaio, blu, con finitura opaca. Misura nominale 3 ⁄ 8"x.375" a coda di rondine. 100"(2.54 mm) ampia post ha. 040" (1 mm) banda larga. Altezze per. 100" ampia post sono elencati nella tabella. Altezze misurate dalla parte superiore della lama verso il basso della coda di rondine. Comprende Test Post vista.
Altro...
Punteggi dei clienti per XS SIGHT SYSTEMS .100" WIDE X .300" HIGH
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.8
Excellent sight.(12.02.2013)
Very bright and visible, sharper than a fiber-optic bead. Easy to install on my Rem 700 ADL.
Beautifully Made.(24.02.2015)
I followed the installation directions (mostly), and had this sight mounted in under 30 seconds. It is beautifully made, and I installed it after filing with two passes to the bottom edge, using a "0" file.
The white line jumps out on all backgrounds and is easily seen even in a low light setting.
I will shoot it next month, after the snow melts.
best front sight for my Marlin(11.07.2015)
I've tried four front sights with an aperture rear sight on my Marlin 1894c:
- original brass colored bead
- Skinner black post
- Marbles fiber optic
- XS....
Of them all, I've found that the XS sight gives me the best precision and is second only to the fiber optic in visibility.
It also has clean lines that don't detract from a lever-gun's appearance (a fiber optic doesn't quite look right on an old-school gun).
And I like how only the post/blade itself extends above the dovetail slot, so there is nothing else cluttering up the sight picture.
My only complaint is that it was not a snug fit in the dovetail slot, and slide in and out way to easily. I ended up using tread lock to keep it in place.
XS post front sights are great(09.04.2016)
I keep a supply of these on hand. I have put them on Win. 94 30-30, Marlin 336 30-30, Marlin Camp Carbine .45, and an old Marlin bolt action tube fed .22 rifle. Match them up with Marble's Bullseye rear sight and you have a poor mans ghost right set up that is easy to install and inexpensive compared to the rest of the market. Great for low light, snap shooting, and moving targets. They are also easier on older eyes too.
Very Clear (27.07.2015)
I use this with a Williams Ace in the Hole peep sight on my 870 deer gun, works very well. The sight picture is much better than using a bead or fiber optic bead because of the constant thickness and white line vs the taper of the bead sight. I find it clearer since my vision isn't perfect anymore. It installed very easily no filing required.