Lightweight, aluminum mount attaches to AR-15 handguards; gives quick, sturdy mounting for lights, forward grips, bipods and tripods. Fits standard, round, plastic, AR-15 and CAR-15 handguards without removing the heat shield. Requires removal of heat shield to fit M4 handguards. Can be attached to top or bottom handguard. Accepts Weaver-style accessories. 4" w/adapter permits use with 2" diameter aluminum float tubes, also fits standard handguard.
SPECS: Aluminum, anodized, black. 2", (5cm), 4" (10.1 cm) and 6" (15.2cm) long. Includes mounting bolts and hardware. 4" w/adapter and 6" Platform also include low profile rail covers.
Altro...
Montaggio Accessori Conveniente
Supporto leggero in alluminio che si attacca ai handguard AR-15; offre un montaggio rapido e robusto per luci, impugnature anteriori, bipiedi e treppiedi. Si adatta a handguard standard, rotondi, in plastica, AR-15 e CAR-15 senza rimuovere il parasole. È necessario rimuovere il parasole per adattarsi agli handguard M4. Può essere attaccato alla parte superiore o inferiore dell'handguard. Accetta accessori in stile Weaver. 4" con adattatore consente l'uso con tubi galleggianti in alluminio di 2" di diametro, si adatta anche all'handguard standard.
SPECIFICHE: Alluminio, anodizzato, nero. Lunghezze di 2" (5cm), 4" (10.1 cm) e 6" (15.2cm). Include viti di montaggio e hardware. 4" con adattatore e 6" Piattaforma includono anche coperture per rail a profilo basso.
Altro...
Punteggi dei clienti per ERGO GRIPS DIRECT THREAD FALCON RAIL PICATINNY ALUMINUM BLACK 2"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Too long for Magpul Carbine handguards(12.03.2010)
The 6" rail is too long for the Magpul MOE Carbine length handguards - the handguard only allows for about a 5 3/8" rail the way it is molded. If you need a full length rail for this handguard, you could certainly chop it down and have it fit. In my particular case, I chose to go with the 4" which the Magpul AFG mounts perfectly fine on.
Works great!(18.06.2011)
Adapter fits perfectly on 2" freefloat handguard tube. Also, with adapter in place, makes it approx. 1/2" riser also. Hardware lets you mount it into the handguard horizontal vent holes without removing it. Good product!
Good alternative to a full rail sytem(17.01.2010)
I mounted this tiny rail segment to the bottom of my Magpul MOE stock. Fits well and simple to install. If you have a specific need and don't have lots of changes to rail items, this is a good alternative to buying a complete rail system or longer rail segment. I've mounted my GG&G vertical grip to this. Solid mount to the rail.
Falcon 4(03.10.2010)
The rail is mounted on the Magpul carbine handguard and fits perfectly. The carbine is use for patrol work with a mounted light on it. The rail does not interfer with holding onto the forearm at all. At present, have not found any unfavorable issues with it.
N. prodotto: 573000017 ERGO GRIPS DIRECT THREAD FALCON RAIL PICATINNY ALUMINUM BLACK 2" Parti Fabbricante: 4752874748001250 Supporto leggero in alluminio che si attacca ai handguard AR-15; offre un montaggio rapido e robusto per luci, impugnature anteriori, bipiedi e treppiedi. Si adatta a handguard standard, rotondi, in plastica, AR-15 e CAR-15 senza rimuovere il parasole. È necessario rimuovere il parasole per adattarsi agli handguard M4. Può essere attaccato alla parte superiore o inferiore dell'handguard. Accetta accessori in stile Weaver. 4" con adattatore consente l'uso con tubi galleggianti in alluminio di 2" di diametro, si adatta anche all'handguard standard.
24.59CHF17CHF 24.59
*CHF 35.90
Tempi di consegna circa 2-4 giorni dal magazzino locale.
Caratteristiche:Adatto per: AR-15Colore: BlackLunghezza: 2 polliciMateriale: AlluminioTipo: PicatinnyTipo: Direct Thread
Lightweight, aluminum mount attaches to AR-15 handguards; gives quick, sturdy mounting for lights, forward grips, bipods and tripods. Fits standard, round, plastic, AR-15 and CAR-15 handguards without removing the heat shield. Requires removal of heat shield to fit M4 handguards. Can be attached to top or bottom handguard. Accepts Weaver-style accessories. 4" w/adapter permits use with 2" diameter aluminum float tubes, also fits standard handguard.
SPECS: Aluminum, anodized, black. 2", (5cm), 4" (10.1 cm) and 6" (15.2cm) long. Includes mounting bolts and hardware. 4" w/adapter and 6" Platform also include low profile rail covers.
Altro...
Montaggio Accessori Conveniente
Supporto leggero in alluminio che si attacca ai handguard AR-15; offre un montaggio rapido e robusto per luci, impugnature anteriori, bipiedi e treppiedi. Si adatta a handguard standard, rotondi, in plastica, AR-15 e CAR-15 senza rimuovere il parasole. È necessario rimuovere il parasole per adattarsi agli handguard M4. Può essere attaccato alla parte superiore o inferiore dell'handguard. Accetta accessori in stile Weaver. 4" con adattatore consente l'uso con tubi galleggianti in alluminio di 2" di diametro, si adatta anche all'handguard standard.
SPECIFICHE: Alluminio, anodizzato, nero. Lunghezze di 2" (5cm), 4" (10.1 cm) e 6" (15.2cm). Include viti di montaggio e hardware. 4" con adattatore e 6" Piattaforma includono anche coperture per rail a profilo basso.
Altro...
Punteggi dei clienti per ERGO GRIPS DIRECT THREAD FALCON RAIL PICATINNY ALUMINUM BLACK 2"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Too long for Magpul Carbine handguards(12.03.2010)
The 6" rail is too long for the Magpul MOE Carbine length handguards - the handguard only allows for about a 5 3/8" rail the way it is molded. If you need a full length rail for this handguard, you could certainly chop it down and have it fit. In my particular case, I chose to go with the 4" which the Magpul AFG mounts perfectly fine on.
Works great!(18.06.2011)
Adapter fits perfectly on 2" freefloat handguard tube. Also, with adapter in place, makes it approx. 1/2" riser also. Hardware lets you mount it into the handguard horizontal vent holes without removing it. Good product!
Good alternative to a full rail sytem(17.01.2010)
I mounted this tiny rail segment to the bottom of my Magpul MOE stock. Fits well and simple to install. If you have a specific need and don't have lots of changes to rail items, this is a good alternative to buying a complete rail system or longer rail segment. I've mounted my GG&G vertical grip to this. Solid mount to the rail.
Falcon 4(03.10.2010)
The rail is mounted on the Magpul carbine handguard and fits perfectly. The carbine is use for patrol work with a mounted light on it. The rail does not interfer with holding onto the forearm at all. At present, have not found any unfavorable issues with it.