Two-piece, slide-on replacement for factory floorplate has a smoothly contoured, easy-to-grasp finger loop that helps you perform lightning-fast magazine changes in high stress situations. Aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Also cushions magazine from impact when dropped concrete or other hard surfaces. Made from tough, yet soft, non-slip synthetic rubber over a stainless steel core that snaps into a reinforced polymer insert to keep the Rangerplate firmly locked to the magazine. Includes molded-in para-cord hole for custom loop configurations. Sold in 3-paks and available in Black, Dark Earth and O.D. Green.
SPECS: Synthetic rubber, stainless steel, and reinforced polymer. Fits 20- and 30-round USGI-style magazines. Instructions included. Sold in 3-paks.
Plus...
Changements de Mag plus faciles avec juste un doigt
Remplacement de deux pièces, slide-on pour usine floorplate a une boucle de doigt sans à-coup profilée, facile à comprendre qui vous aide à réaliser des changements magazines rapide comme l'éclair dans des situations de stress élevé. SIDA en extraction rapide et positive de sachets de mag serré et contribue à que vous agripper le chargeur vide avec juste un doigt après un rechargement tactique. Aussi des coussins magazine impact quand a chuté de béton ou autres surfaces dures. Fabriqué à partir dur, mais doux et anti-dérapante en caoutchouc synthétique sur un noyau en acier inoxydable qui s'enclenche dans un polymère renforcé insert pour garder le Rangerplate bien verrouillé pour le magazine. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.
SPECS : caoutchouc synthétique, acier inoxydable et polymères renforcés. Ajustements de 20 et 30-ronde magazines USGI-style. Instructions incluses. Vendu en 3-paks.
Plus...
Évaluations client de MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4.4
These floor plates are the "cats meow"!!(29.03.2010)
These floor plates are great when the mag pouch you are using is "deeper" than the mag is long. Simply hook a finger into the floor plate and pull. They are relatively inexpensive and easy to install. I have them on ALL my AR mags.
The only "con" is that when they are installed, they limit a 30rd mag to 29rds, especially if you have the good Gen 3 anti-tilt followers installed. This is due to the way the floor plates are locked into the mag. The floor plate lock takes up about 1 cartridge height of space right above the floor plate, inside of the mag. When used with the Gen 3 anti-tilt follower (Magpul), the follower bottoms out on top of the lock at round cartridge number 29.
What I've done to "improvise, overcome & adapt" this problem, is to take the anti-tilt follower and put each leg to a grinding wheel so that approx. 1/4" inch is taken off of the follower. The follower still retains its' anti-tilt abilities but also lets the user stuff the mag with the intended 30rnds.
THAT is why I only gave the floor plates a "4" rating. Other than that, yes, they really are the "cat's meow"!!
Easy to grab(21.12.2010)
Easy to grab, and easy to instal on most of my mags. They do reduce a 30 round mag to 29 but they are fine on the Canadian LAR-15 10 round mags.
Loss of a round(22.02.2011)
I ordered two packages of this item. After installation on the Brownells 30 rd mags, I found that the plastic base that has to be installed causes you to lose one round making the mag lite 1 rnd. Overall I like the product and makes it much easier to retrieve the next mag from the pouch. The only negative is the loss of that one round that could make the difference between living or dying.
Good once installed(05.12.2011)
These Ranger plates are a great addition to the M16/M4/AR15 magazine. They provide easier acqusition from a mag pouch and alsohelp with inserting the mag, The rubber grip contours nicely with a "beer can" grip.
There is only one real drawback (aside from the annoyance of getting them installed) is that they only hold 28 rounds. The packaging itself says not to load more than 28 rounds because it can affect feeding. Not much of an issue for those of us north of the border as our 30 round mags are all capped at 5. To those who enjoy high capacity mags, you'll have to run 2 short.
On Every Mag I Can Put It On!(11.05.2012)
Not only aids in grasping the magazine, but more importantly turns the mag into a monopod. The only downside is that it extends the length of the magazine so it may not longer fit in closed-top pouches, such as found in a lot of tactical vests. Easily solved by adding a velcro extension to most vest closures...
Référence: 100002196 MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK Ref Fabricant: MAG020-BLK873750000015 Remplacement de deux pièces, slide-on pour usine floorplate a une boucle de doigt sans à-coup profilée, facile à comprendre qui vous aide à réaliser des changements magazines rapide comme l'éclair dans des situations de stress élevé. SIDA en extraction rapide et positive de sachets de mag serré et contribue à que vous agripper le chargeur vide avec juste un doigt après un rechargement tactique. Aussi des coussins magazine impact quand a chuté de béton ou autres surfaces dures. Fabriqué à partir dur, mais doux et anti-dérapante en caoutchouc synthétique sur un noyau en acier inoxydable qui s'enclenche dans un polymère renforcé insert pour garder le Rangerplate bien verrouillé pour le magazine. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.
32.9CHF109CHF 32.90
*
Délai de livraison environ 2-4 jours à partir de l'entrepôt local.
Référence: 100003721 MAGPUL RANGER FLOORPLATE, 3-PAK, O.D. GREEN Ref Fabricant: MAG020-ODG873750000275 Remplacement de deux pièces, slide-on pour usine floorplate a une boucle de doigt sans à-coup profilée, facile à comprendre qui vous aide à réaliser des changements magazines rapide comme l'éclair dans des situations de stress élevé. SIDA en extraction rapide et positive de sachets de mag serré et contribue à que vous agripper le chargeur vide avec juste un doigt après un rechargement tactique. Aussi des coussins magazine impact quand a chuté de béton ou autres surfaces dures. Fabriqué à partir dur, mais doux et anti-dérapante en caoutchouc synthétique sur un noyau en acier inoxydable qui s'enclenche dans un polymère renforcé insert pour garder le Rangerplate bien verrouillé pour le magazine. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.
32.9CHF267CHF 32.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100003720 MAGPUL RANGER FLOORPLATE, 3-PAK, DARK EARTH Ref Fabricant: MAG020-FDE873750000282 Remplacement de deux pièces, slide-on pour usine floorplate a une boucle de doigt sans à-coup profilée, facile à comprendre qui vous aide à réaliser des changements magazines rapide comme l'éclair dans des situations de stress élevé. SIDA en extraction rapide et positive de sachets de mag serré et contribue à que vous agripper le chargeur vide avec juste un doigt après un rechargement tactique. Aussi des coussins magazine impact quand a chuté de béton ou autres surfaces dures. Fabriqué à partir dur, mais doux et anti-dérapante en caoutchouc synthétique sur un noyau en acier inoxydable qui s'enclenche dans un polymère renforcé insert pour garder le Rangerplate bien verrouillé pour le magazine. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.
32.9CHF117CHF 32.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Couleur: Dark EarthManufacture: AR-15
Two-piece, slide-on replacement for factory floorplate has a smoothly contoured, easy-to-grasp finger loop that helps you perform lightning-fast magazine changes in high stress situations. Aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Also cushions magazine from impact when dropped concrete or other hard surfaces. Made from tough, yet soft, non-slip synthetic rubber over a stainless steel core that snaps into a reinforced polymer insert to keep the Rangerplate firmly locked to the magazine. Includes molded-in para-cord hole for custom loop configurations. Sold in 3-paks and available in Black, Dark Earth and O.D. Green.
SPECS: Synthetic rubber, stainless steel, and reinforced polymer. Fits 20- and 30-round USGI-style magazines. Instructions included. Sold in 3-paks.
Plus...
Changements de Mag plus faciles avec juste un doigt
Remplacement de deux pièces, slide-on pour usine floorplate a une boucle de doigt sans à-coup profilée, facile à comprendre qui vous aide à réaliser des changements magazines rapide comme l'éclair dans des situations de stress élevé. SIDA en extraction rapide et positive de sachets de mag serré et contribue à que vous agripper le chargeur vide avec juste un doigt après un rechargement tactique. Aussi des coussins magazine impact quand a chuté de béton ou autres surfaces dures. Fabriqué à partir dur, mais doux et anti-dérapante en caoutchouc synthétique sur un noyau en acier inoxydable qui s'enclenche dans un polymère renforcé insert pour garder le Rangerplate bien verrouillé pour le magazine. Comprend un trou moulé en para-cordon pour les configurations de boucle personnalisée. Vendu en 3-paks et disponible en noir, Dark Earth et OD Green.
SPECS : caoutchouc synthétique, acier inoxydable et polymères renforcés. Ajustements de 20 et 30-ronde magazines USGI-style. Instructions incluses. Vendu en 3-paks.
Plus...
Évaluations client de MAGPUL RANGER FLOORPLATE, 3-PAK, BLACK
Nombre d'évaluations: 5
De brownells.com: 5
Note moyenne: 4.4
These floor plates are the "cats meow"!!(29.03.2010)
These floor plates are great when the mag pouch you are using is "deeper" than the mag is long. Simply hook a finger into the floor plate and pull. They are relatively inexpensive and easy to install. I have them on ALL my AR mags.
The only "con" is that when they are installed, they limit a 30rd mag to 29rds, especially if you have the good Gen 3 anti-tilt followers installed. This is due to the way the floor plates are locked into the mag. The floor plate lock takes up about 1 cartridge height of space right above the floor plate, inside of the mag. When used with the Gen 3 anti-tilt follower (Magpul), the follower bottoms out on top of the lock at round cartridge number 29.
What I've done to "improvise, overcome & adapt" this problem, is to take the anti-tilt follower and put each leg to a grinding wheel so that approx. 1/4" inch is taken off of the follower. The follower still retains its' anti-tilt abilities but also lets the user stuff the mag with the intended 30rnds.
THAT is why I only gave the floor plates a "4" rating. Other than that, yes, they really are the "cat's meow"!!
Easy to grab(21.12.2010)
Easy to grab, and easy to instal on most of my mags. They do reduce a 30 round mag to 29 but they are fine on the Canadian LAR-15 10 round mags.
Loss of a round(22.02.2011)
I ordered two packages of this item. After installation on the Brownells 30 rd mags, I found that the plastic base that has to be installed causes you to lose one round making the mag lite 1 rnd. Overall I like the product and makes it much easier to retrieve the next mag from the pouch. The only negative is the loss of that one round that could make the difference between living or dying.
Good once installed(05.12.2011)
These Ranger plates are a great addition to the M16/M4/AR15 magazine. They provide easier acqusition from a mag pouch and alsohelp with inserting the mag, The rubber grip contours nicely with a "beer can" grip.
There is only one real drawback (aside from the annoyance of getting them installed) is that they only hold 28 rounds. The packaging itself says not to load more than 28 rounds because it can affect feeding. Not much of an issue for those of us north of the border as our 30 round mags are all capped at 5. To those who enjoy high capacity mags, you'll have to run 2 short.
On Every Mag I Can Put It On!(11.05.2012)
Not only aids in grasping the magazine, but more importantly turns the mag into a monopod. The only downside is that it extends the length of the magazine so it may not longer fit in closed-top pouches, such as found in a lot of tactical vests. Easily solved by adding a velcro extension to most vest closures...