Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.
SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.
Mehr...
Ermöglicht eine schnelle, professionelle No-Mar-Pad-Installation
Einer der schwierigsten Aspekte beim Anbringen eines Rückstosskissens war immer das endgültige Anbringen des Kissens an Holz, da es so einfach ist, den Schaft mit der Scheibe, dem Schleifstreifen oder der Feile zu schlagen - und das Finish zu ruinieren. Die B & R Rückstosskissen-Montagevorrichtung verhindert das Risiko von Materialschäden, indem Sie das Kissen vollständig vom Material entfernen und von diesem entfernen können. Die Schablone besteht aus zwei Grundelementen: (1) einem einstellbaren Dreieck, an dem das Polster angebracht ist, um auf Mass angefertigt zu werden, und (2) einer universellen Halterung, die am Schleifscheibentisch befestigt wird. Die Bedienung ist einfach. Schneiden Sie zuerst den Schaft auf die Länge und Teilung, die für den Kunden erforderlich sind. Befestigen Sie den Block am Schaft und zeichnen Sie den Umriss des Schafts scharf auf den Block. Übertragen Sie dann das Polster auf die Grundplatte der Schablone, stellen Sie den Neigungswinkel ein, setzen Sie die Schablone auf die Halterung und kleiden Sie das Polster so, dass nur die geritzte Linie entfernt wird (dies ist erforderlich, da die Linie ausserhalb des Schafts gezogen wurde ). Zum Schluss testen Sie, ob das Polster am Schaft befestigt ist, und führen Sie bei Bedarf das endgültige Anziehen von Hand durch. Die Linien des Stocks werden korrekt in das Pad getragen - und Sie haben eine perfekte Passform! Die Schablone beseitigt alle Schäden an der Schaftoberfläche und reduziert den gesamten Vorgang der Belagmontage auf eine einfache 15-minütige Übung - was die Arbeit zu einer einfachen und äusserst rentablen macht.
TECHNISCHE DATEN: Die Stahlstütze ist 51,4 cm (20-1 legs4 ") lang. Die Beine aus Stahldreieck sind 29,2 cm (11-1⁄4") lang. Die Aluminium-Grundplatte ist 9 cm lang. Inklusive Anleitung.
Mehr...
Kundenbewertungen zu BROWNELLS B&R RECOIL PAD FITTING JIG
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3.3
Will you re add this product??(15.01.2012)
Do you forsee adding this out of stock item to your catalog again? I had one some time ago and found it to be an excellent tool which saved a great deal of time. I was hoping to add it to my tool collection again as I restart my business. I am a disabled veteran however do find this product was easy to use for the purpose.
What a time saver!(14.02.2012)
Once I drilled out the hole in the swivel so the hanger hook fit through I had it made. This product does what it claims, SAVES TIME. I've fit 4 pads with it so far and it really is a "Why didn't I think of this."
Mine needed modifications before use(18.02.2012)
Looked like a good idea. The piece that the pad screws on to must be modified before use. The center to center hole spacing is 3.050". A medium size pad is spaced 3.12" and a large size pad is 3.22". Either modify the part supplied or modify every pad you fit. The maker of the tool supplies the information to contact them for a blank piece so you may drill & tap to fit your needs. I had mine for quite awhile before I used it. If I had known it would require modification before I could put it to work, I doubt that I would have purchased it.
Not universal(03.10.2013)
The makers of this product say that it is universal, but it is not. Most recoil pads for shotguns and rifles do not line up with the wholes and had i known before i would have used a friends mill and made my own.
Artikel-Nr.: 080000868 BROWNELLS B&R RECOIL PAD FITTING JIG050806110250 Einer der schwierigsten Aspekte beim Anbringen eines Rückstosskissens war immer das endgültige Anbringen des Kissens an Holz, da es so einfach ist, den Schaft mit der Scheibe, dem Schleifstreifen oder der Feile zu schlagen - und das Finish zu ruinieren. Die B & R Rückstosskissen-Montagevorrichtung verhindert das Risiko von Materialschäden, indem Sie das Kissen vollständig vom Material entfernen und von diesem entfernen können. Die Schablone besteht aus zwei Grundelementen: (1) einem einstellbaren Dreieck, an dem das Polster angebracht ist, um auf Mass angefertigt zu werden, und (2) einer universellen Halterung, die am Schleifscheibentisch befestigt wird. Die Bedienung ist einfach. Schneiden Sie zuerst den Schaft auf die Länge und Teilung, die für den Kunden erforderlich sind. Befestigen Sie den Block am Schaft und zeichnen Sie den Umriss des Schafts scharf auf den Block. Übertragen Sie dann das Polster auf die Grundplatte der Schablone, stellen Sie den Neigungswinkel ein, setzen Sie die Schablone auf die Halterung und kleiden Sie das Polster so, dass nur die geritzte Linie entfernt wird (dies ist erforderlich, da die Linie ausserhalb des Schafts gezogen wurde ). Zum Schluss testen Sie, ob das Polster am Schaft befestigt ist, und führen Sie bei Bedarf das endgültige Anziehen von Hand durch. Die Linien des Stocks werden korrekt in das Pad getragen - und Sie haben eine perfekte Passform! Die Schablone beseitigt alle Schäden an der Schaftoberfläche und reduziert den gesamten Vorgang der Belagmontage auf eine einfache 15-minütige Übung - was die Arbeit zu einer einfachen und äusserst rentablen macht.
139.9CHF0CHF 139.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.
SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.
Mehr...
Ermöglicht eine schnelle, professionelle No-Mar-Pad-Installation
Einer der schwierigsten Aspekte beim Anbringen eines Rückstosskissens war immer das endgültige Anbringen des Kissens an Holz, da es so einfach ist, den Schaft mit der Scheibe, dem Schleifstreifen oder der Feile zu schlagen - und das Finish zu ruinieren. Die B & R Rückstosskissen-Montagevorrichtung verhindert das Risiko von Materialschäden, indem Sie das Kissen vollständig vom Material entfernen und von diesem entfernen können. Die Schablone besteht aus zwei Grundelementen: (1) einem einstellbaren Dreieck, an dem das Polster angebracht ist, um auf Mass angefertigt zu werden, und (2) einer universellen Halterung, die am Schleifscheibentisch befestigt wird. Die Bedienung ist einfach. Schneiden Sie zuerst den Schaft auf die Länge und Teilung, die für den Kunden erforderlich sind. Befestigen Sie den Block am Schaft und zeichnen Sie den Umriss des Schafts scharf auf den Block. Übertragen Sie dann das Polster auf die Grundplatte der Schablone, stellen Sie den Neigungswinkel ein, setzen Sie die Schablone auf die Halterung und kleiden Sie das Polster so, dass nur die geritzte Linie entfernt wird (dies ist erforderlich, da die Linie ausserhalb des Schafts gezogen wurde ). Zum Schluss testen Sie, ob das Polster am Schaft befestigt ist, und führen Sie bei Bedarf das endgültige Anziehen von Hand durch. Die Linien des Stocks werden korrekt in das Pad getragen - und Sie haben eine perfekte Passform! Die Schablone beseitigt alle Schäden an der Schaftoberfläche und reduziert den gesamten Vorgang der Belagmontage auf eine einfache 15-minütige Übung - was die Arbeit zu einer einfachen und äusserst rentablen macht.
TECHNISCHE DATEN: Die Stahlstütze ist 51,4 cm (20-1 legs4 ") lang. Die Beine aus Stahldreieck sind 29,2 cm (11-1⁄4") lang. Die Aluminium-Grundplatte ist 9 cm lang. Inklusive Anleitung.
Mehr...
Kundenbewertungen zu BROWNELLS B&R RECOIL PAD FITTING JIG
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3.3
Will you re add this product??(15.01.2012)
Do you forsee adding this out of stock item to your catalog again? I had one some time ago and found it to be an excellent tool which saved a great deal of time. I was hoping to add it to my tool collection again as I restart my business. I am a disabled veteran however do find this product was easy to use for the purpose.
What a time saver!(14.02.2012)
Once I drilled out the hole in the swivel so the hanger hook fit through I had it made. This product does what it claims, SAVES TIME. I've fit 4 pads with it so far and it really is a "Why didn't I think of this."
Mine needed modifications before use(18.02.2012)
Looked like a good idea. The piece that the pad screws on to must be modified before use. The center to center hole spacing is 3.050". A medium size pad is spaced 3.12" and a large size pad is 3.22". Either modify the part supplied or modify every pad you fit. The maker of the tool supplies the information to contact them for a blank piece so you may drill & tap to fit your needs. I had mine for quite awhile before I used it. If I had known it would require modification before I could put it to work, I doubt that I would have purchased it.
Not universal(03.10.2013)
The makers of this product say that it is universal, but it is not. Most recoil pads for shotguns and rifles do not line up with the wholes and had i known before i would have used a friends mill and made my own.