The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your mounted scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Aluminum Mil. Spec. Now features an Anodized Hard Coat Type III in a crimson and black finish. Instructions included. FOR USE WITH MIL STD 1913 PICATINNY COMPLIANT RINGS AND MOUNTS
Altro...
Il livello di Dead livelli il reticolo in relazione alla terra tenendo fuori qualsiasi margine di errore del reticolo non essendo perfettamente livello con il corpo di ambito. Basta collegare il cannocchiale montato sul livello morto, livello il dispositivo con le viti di precisione per centrare il livello del bulls-eye, poi solo livello il reticolo con un predeterminato livello di linea o il peso plumb. In alluminio Mil. Spec. Ora dispone di un III anodizzato duro tipo cappotto in una finitura cremisi e nera. Istruzioni incluse. PER L'UTILIZZO CON SUPPORTI E MIL STD 1913 PICATINNY COMPATIBILE CON ANELLI
Altro...
Punteggi dei clienti per BADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
Excellent Tool(04.11.2013)
This tool is excellent at getting your scope perfectly level and tightening the scope in the rings. When shooting long range competitions it is important to dial in elevation from 200 to 1000 yards and not have windage drift. It is a bit expensive, but well worth it. Very solidly built. Will last a lifetime.
Good but not perfect(25.10.2014)
Pros:
Once I attached a set of rings to the rail, mounted the
scope a little loosely in the rings & levelled the base, it
was a quick job to level the reticle by looking through the
scope at a reference line from a self leveling laser level
line projected on the wall, rotating the scope until the
reticle matched the laser line, tightening down the rings
and rechecking the alignment.
Cons:
I found the integral bubble level hard to get centered so I
had to use another level to get the base level.
Because of the length of the rail, low rings don't work
well with it unless risers are added. A shorter rail would
N. prodotto: 093000051 BADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE Parti Fabbricante: 20050 Il livello di Dead livelli il reticolo in relazione alla terra tenendo fuori qualsiasi margine di errore del reticolo non essendo perfettamente livello con il corpo di ambito. Basta collegare il cannocchiale montato sul livello morto, livello il dispositivo con le viti di precisione per centrare il livello del bulls-eye, poi solo livello il reticolo con un predeterminato livello di linea o il peso plumb. In alluminio Mil. Spec. Ora dispone di un III anodizzato duro tipo cappotto in una finitura cremisi e nera. Istruzioni incluse. PER L'UTILIZZO CON SUPPORTI E MIL STD 1913 PICATINNY COMPATIBILE CON ANELLI
284.9CHF0CHF 284.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your mounted scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Aluminum Mil. Spec. Now features an Anodized Hard Coat Type III in a crimson and black finish. Instructions included. FOR USE WITH MIL STD 1913 PICATINNY COMPLIANT RINGS AND MOUNTS
Altro...
Il livello di Dead livelli il reticolo in relazione alla terra tenendo fuori qualsiasi margine di errore del reticolo non essendo perfettamente livello con il corpo di ambito. Basta collegare il cannocchiale montato sul livello morto, livello il dispositivo con le viti di precisione per centrare il livello del bulls-eye, poi solo livello il reticolo con un predeterminato livello di linea o il peso plumb. In alluminio Mil. Spec. Ora dispone di un III anodizzato duro tipo cappotto in una finitura cremisi e nera. Istruzioni incluse. PER L'UTILIZZO CON SUPPORTI E MIL STD 1913 PICATINNY COMPATIBILE CON ANELLI
Altro...
Punteggi dei clienti per BADGER ORDNANCE DEAD LEVEL SCOPE LEVELING DEVICE
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 4.5
Excellent Tool(04.11.2013)
This tool is excellent at getting your scope perfectly level and tightening the scope in the rings. When shooting long range competitions it is important to dial in elevation from 200 to 1000 yards and not have windage drift. It is a bit expensive, but well worth it. Very solidly built. Will last a lifetime.
Good but not perfect(25.10.2014)
Pros:
Once I attached a set of rings to the rail, mounted the
scope a little loosely in the rings & levelled the base, it
was a quick job to level the reticle by looking through the
scope at a reference line from a self leveling laser level
line projected on the wall, rotating the scope until the
reticle matched the laser line, tightening down the rings
and rechecking the alignment.
Cons:
I found the integral bubble level hard to get centered so I
had to use another level to get the base level.
Because of the length of the rail, low rings don't work
well with it unless risers are added. A shorter rail would