All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Plus...
Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
SPECS : aluminium, noir, anodisé. Vis en acier. Cela peut nécessiter le raccord en broyant le bout des fils pour s'adapter à certains sites.
Plus...
Évaluations client de WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Référence: 962157250 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT Ref Fabricant: 11524053506115242 Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
18.9CHF13CHF 18.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Poids du colis: 0.045kgHauteur d'expédition: 3mmLargeur d'expédition: 83mmLongueur d'expédition: 146mm
Détails de l'article
Fabriqué au USA
Référence: 962157530 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, SHORT Ref Fabricant: 15753053506157532 Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
18.9CHF1CHF 18.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 962000079 WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB Ref Fabricant: 61613005350616130 Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
18.9CHF3CHF 18.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 962157240 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, LONG Ref Fabricant: 11525053506115259 Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
Référence: 962157520 WILLIAMS GUN SIGHT TARGET WINDAGE KNOB, LONG Ref Fabricant: 15752053506157525 Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Plus...
Tous les sites à toute épreuve (sauf modèles TK) utilisent le bouton d'élévation court. Le Long bouton de hauteur est destiné aux sites cible Foolproof-TK. Le bouton de verrouillage de Gib élévation correspond à deux modèles standard d'indéréglable et Foolproof-TK
SPECS : aluminium, noir, anodisé. Vis en acier. Cela peut nécessiter le raccord en broyant le bout des fils pour s'adapter à certains sites.
Plus...
Évaluations client de WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.