Self-centering rear ghost ring with large, .122" I.D. aperature for lightning quick target acquisition. Formed steel with elongated cooling slots protects your hand from burns. Provides a secure, non-slip, grasping surface, and provides maximum heat dissipation. Front blade with side guards protects the blade and prevents snagging. Each Heatshield should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm, please enlist the services of your local gunsmith. ATI is not responsible for any damage caused by Improper Installation. Fits Most 12, 16, 20 Gauge and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns.
SPECS: Shield - Steel, black finish. 13” (35cm) long. Sights - Polymer, matte black. Aperature - .122” (3.1mm) ID. Fits most 12/16/20 gauge and .410 pump shotguns.
Mehr...
Verbessern Sie die Kontrolle und Handhabung
Selbstzentrierender hinterer Geister-Ring mit grosser Apertur mit einem Innendurchmesser von 1,22 Zoll für eine blitzschnelle Zielerfassung. Aus geformtem Stahl mit länglichen Kühlschlitzen schützt Ihre Hand vor Verbrennungen. Bietet eine sichere, rutschfeste, griffige Oberfläche und sorgt für maximale Wärmeableitung Die Klinge mit Seitenschutz schützt die Klinge und verhindert ein Verklemmen. Jedes Hitzeschild sollte massgeschneidert sein. Wenn Sie nicht über die richtigen Werkzeuge verfügen oder sich nicht wohl fühlen, wenn Sie das Hitzeschild an Ihrer Waffe befestigen möchten, wenden Sie sich bitte an Ihren örtlichen Büchsenmacher. ATI ist dies nicht Für Schäden verantwortlich, die durch unsachgemässe Installation verursacht wurden Für die meisten 12, 16, 20 Gauge und .410 Pumpflintenläufe Hitzeschilde sollten nicht für Mossberg Mariner oder Remington Marine Coat Shotguns verwendet werden.
TECHNISCHE DATEN: Schild - Stahl, schwarz lackiert. 35 cm lang. Sehenswürdigkeiten - Polymer, mattschwarz. Lufttemperatur - 3,1 mm (.122 ”) ID. Passend für die meisten 12/16/20 und .410 Pump Shotguns.
Mehr...
Kundenbewertungen zu ADVANCED TECHNOLOGY DELUXE HEAT SHIELD W/SIGHTS, BLACK
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
shotgun clamp on sight/heat shield(21.10.2010)
don't waste your time or money on this piece of junk. It twist very easily, rib hits pump action wood, won't clamp securely at rear. All in all a poor design. But you get what you pay for.MY ADVISE DONNOT BUY IT OR YOU WILL BE SORRY. [...]
Good shield(27.03.2014)
This heat shield worked out great on my 870 tactical. You do have to do a little bit of adjustments, but as long as you follow the directions you'll be fine. Shot some slugs and buckshot with it on and it doesn't move at all. It's on the gun really good. Not sure why other people have issues with this heat shield. Best $20 I spent and I am really fussy with how my firearms look, and my shotgun looks great with this on and it really does save your hands from getting burnt
Great Improvement for an Old Dog(30.04.2018)
I bought an old Western Field (Noble 60) 16ga at a gun show for $100.I shortened the barrel to 18 1/2 inches and took a pair of Channel Locks with rubber jaw covers and gently squeezed the heat shield to reduce it's diameter till it slid on the barrel nice and tight.
One of the front mounting holes was clear behind the magazine tube to barrel mount so I squeezed it tight and clamped it with the screw.
Artikel-Nr.: 019000018 ADVANCED TECHNOLOGY DELUXE HEAT SHIELD W/SIGHTS, BLACK Herstellerproduktnummer: SBS4600758152546005 Selbstzentrierender hinterer Geister-Ring mit grosser Apertur mit einem Innendurchmesser von 1,22 Zoll für eine blitzschnelle Zielerfassung. Aus geformtem Stahl mit länglichen Kühlschlitzen schützt Ihre Hand vor Verbrennungen. Bietet eine sichere, rutschfeste, griffige Oberfläche und sorgt für maximale Wärmeableitung Die Klinge mit Seitenschutz schützt die Klinge und verhindert ein Verklemmen. Jedes Hitzeschild sollte massgeschneidert sein. Wenn Sie nicht über die richtigen Werkzeuge verfügen oder sich nicht wohl fühlen, wenn Sie das Hitzeschild an Ihrer Waffe befestigen möchten, wenden Sie sich bitte an Ihren örtlichen Büchsenmacher. ATI ist dies nicht Für Schäden verantwortlich, die durch unsachgemässe Installation verursacht wurden Für die meisten 12, 16, 20 Gauge und .410 Pumpflintenläufe Hitzeschilde sollten nicht für Mossberg Mariner oder Remington Marine Coat Shotguns verwendet werden.
Self-centering rear ghost ring with large, .122" I.D. aperature for lightning quick target acquisition. Formed steel with elongated cooling slots protects your hand from burns. Provides a secure, non-slip, grasping surface, and provides maximum heat dissipation. Front blade with side guards protects the blade and prevents snagging. Each Heatshield should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm, please enlist the services of your local gunsmith. ATI is not responsible for any damage caused by Improper Installation. Fits Most 12, 16, 20 Gauge and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns.
SPECS: Shield - Steel, black finish. 13” (35cm) long. Sights - Polymer, matte black. Aperature - .122” (3.1mm) ID. Fits most 12/16/20 gauge and .410 pump shotguns.
Mehr...
Verbessern Sie die Kontrolle und Handhabung
Selbstzentrierender hinterer Geister-Ring mit grosser Apertur mit einem Innendurchmesser von 1,22 Zoll für eine blitzschnelle Zielerfassung. Aus geformtem Stahl mit länglichen Kühlschlitzen schützt Ihre Hand vor Verbrennungen. Bietet eine sichere, rutschfeste, griffige Oberfläche und sorgt für maximale Wärmeableitung Die Klinge mit Seitenschutz schützt die Klinge und verhindert ein Verklemmen. Jedes Hitzeschild sollte massgeschneidert sein. Wenn Sie nicht über die richtigen Werkzeuge verfügen oder sich nicht wohl fühlen, wenn Sie das Hitzeschild an Ihrer Waffe befestigen möchten, wenden Sie sich bitte an Ihren örtlichen Büchsenmacher. ATI ist dies nicht Für Schäden verantwortlich, die durch unsachgemässe Installation verursacht wurden Für die meisten 12, 16, 20 Gauge und .410 Pumpflintenläufe Hitzeschilde sollten nicht für Mossberg Mariner oder Remington Marine Coat Shotguns verwendet werden.
TECHNISCHE DATEN: Schild - Stahl, schwarz lackiert. 35 cm lang. Sehenswürdigkeiten - Polymer, mattschwarz. Lufttemperatur - 3,1 mm (.122 ”) ID. Passend für die meisten 12/16/20 und .410 Pump Shotguns.
Mehr...
Kundenbewertungen zu ADVANCED TECHNOLOGY DELUXE HEAT SHIELD W/SIGHTS, BLACK
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
shotgun clamp on sight/heat shield(21.10.2010)
don't waste your time or money on this piece of junk. It twist very easily, rib hits pump action wood, won't clamp securely at rear. All in all a poor design. But you get what you pay for.MY ADVISE DONNOT BUY IT OR YOU WILL BE SORRY. [...]
Good shield(27.03.2014)
This heat shield worked out great on my 870 tactical. You do have to do a little bit of adjustments, but as long as you follow the directions you'll be fine. Shot some slugs and buckshot with it on and it doesn't move at all. It's on the gun really good. Not sure why other people have issues with this heat shield. Best $20 I spent and I am really fussy with how my firearms look, and my shotgun looks great with this on and it really does save your hands from getting burnt
Great Improvement for an Old Dog(30.04.2018)
I bought an old Western Field (Noble 60) 16ga at a gun show for $100.I shortened the barrel to 18 1/2 inches and took a pair of Channel Locks with rubber jaw covers and gently squeezed the heat shield to reduce it's diameter till it slid on the barrel nice and tight.
One of the front mounting holes was clear behind the magazine tube to barrel mount so I squeezed it tight and clamped it with the screw.