Rock-Solid, Low-Profile Mount for Popular Harris Bipods
The Badger Ordnance Low-Profile Harris Bipod Mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for Harris Engineering swivel-style bipods. It can be easily installed for use with any Harris BRM-S bipod in just a few minutes. Badger Ordnance’s engineers designed the Low-Profile Harris Bipod Mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with Harris BRM-S bipods Includes all necessary mounting hardware - Installation tool is not included Picatinny model attaches to any MIL-STD 1913 Picatinny accessory rail M-LOK® attaches to any handguard with Magpul M-LOK® attachment points The strength of Badger Ordnance’s Low-Profile Harris Bipod Mount comes from its construction. It’s machined from extra-strong 7075 T6 aluminum alloy - no flimsy plastic parts to fail - with a tough, corrosion-resistant Type III hardcoat anodized finish for a lifetime of stalwart service.
Altro...
Solido come una roccia, basso profilo Mount per popolare Harris Bipods
Montare il Badger Ordnance Low-Profile Harris bipiede sostituisce il vostro attuale piastra di montaggio e la vite a testa zigrinata per fornire un punto di attacco più snella, più basso profilo per Harris ingegneria bipods girevole-stile. Può essere facilmente installato per l'utilizzo con qualsiasi bipiede Harris BRM-S in pochi minuti. Gli ingegneri di Badger Ordnance progettato il monte basso profilo bipiede Harris di essere abbastanza forte che può essere utilizzato anche per barricata a braccia tiro senza il rischio di rottura del Monte. Per uso con bipiedi Harris BRM-S comprende tutto l'hardware necessario per il montaggio - strumento di installazione non è incluso il modello Picatinny attribuisce al qualsiasi MIL-STD 1913 Picatinny rail accessorio M-LOK® attribuisce al qualsiasi handguard con morsetti Magpul M-LOK® collegamento punti RAC direttamente a qualsiasi guida di Remington RAC la forza di basso profilo Harris bipiede Mount di Badger Ordnance deriva dalla sua costruzione. Esso è lavorato dalla lega di alluminio 7075 T6 extra-forte - nessuna parte in plastica fragile mancato - con una resistente, resistente alla corrosione di tipo III hardcoat anodizzato finitura per una vita di servizio coraggioso.
Altro...
Punteggi dei clienti per BADGER ORDNANCE LOW PROFILE HARRIS MOUNT PICATINNY
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
A must have(12.08.2018)
This mount is a must have for any SBRM Harris bipod. It replaces the sling stud mount and mounts directly to a picatinnny rail section. It allows for a much lower profile than using an adapter and creates a rock solid attachment that wonât come lose or rotate or slide around like the stock mount. Itâs obviously more expensive than buying a $20 YHM adapter, but it shaves about 2oz, is lower profile, and far more solid. It is not QD, but I never remove my bipods so this is actually a pro for me as it saves weight and size compared to a QD mount.
N. prodotto: 093000108 BADGER ORDNANCE LOW PROFILE HARRIS MOUNT PICATINNY Parti Fabbricante: 53401 Montare il Badger Ordnance Low-Profile Harris bipiede sostituisce il vostro attuale piastra di montaggio e la vite a testa zigrinata per fornire un punto di attacco più snella, più basso profilo per Harris ingegneria bipods girevole-stile. Può essere facilmente installato per l'utilizzo con qualsiasi bipiede Harris BRM-S in pochi minuti. Gli ingegneri di Badger Ordnance progettato il monte basso profilo bipiede Harris di essere abbastanza forte che può essere utilizzato anche per barricata a braccia tiro senza il rischio di rottura del Monte. Per uso con bipiedi Harris BRM-S comprende tutto l'hardware necessario per il montaggio - strumento di installazione non è incluso il modello Picatinny attribuisce al qualsiasi MIL-STD 1913 Picatinny rail accessorio M-LOK® attribuisce al qualsiasi handguard con morsetti Magpul M-LOK® collegamento punti RAC direttamente a qualsiasi guida di Remington RAC la forza di basso profilo Harris bipiede Mount di Badger Ordnance deriva dalla sua costruzione. Esso è lavorato dalla lega di alluminio 7075 T6 extra-forte - nessuna parte in plastica fragile mancato - con una resistente, resistente alla corrosione di tipo III hardcoat anodizzato finitura per una vita di servizio coraggioso.
119.9CHF1CHF 119.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Finitura:
Opaco Black
Tipo:
Picatinny
Peso della spedizione: 0.068kgAltezza di spedizione: 38mmLarghezza di spedizione: 38mmLunghezza di spedizione: 127mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 093000107 BADGER ORDNANCE LOW PROFILE HARRIS MOUNT MLOK Parti Fabbricante: 58801 Montare il Badger Ordnance Low-Profile Harris bipiede sostituisce il vostro attuale piastra di montaggio e la vite a testa zigrinata per fornire un punto di attacco più snella, più basso profilo per Harris ingegneria bipods girevole-stile. Può essere facilmente installato per l'utilizzo con qualsiasi bipiede Harris BRM-S in pochi minuti. Gli ingegneri di Badger Ordnance progettato il monte basso profilo bipiede Harris di essere abbastanza forte che può essere utilizzato anche per barricata a braccia tiro senza il rischio di rottura del Monte. Per uso con bipiedi Harris BRM-S comprende tutto l'hardware necessario per il montaggio - strumento di installazione non è incluso il modello Picatinny attribuisce al qualsiasi MIL-STD 1913 Picatinny rail accessorio M-LOK® attribuisce al qualsiasi handguard con morsetti Magpul M-LOK® collegamento punti RAC direttamente a qualsiasi guida di Remington RAC la forza di basso profilo Harris bipiede Mount di Badger Ordnance deriva dalla sua costruzione. Esso è lavorato dalla lega di alluminio 7075 T6 extra-forte - nessuna parte in plastica fragile mancato - con una resistente, resistente alla corrosione di tipo III hardcoat anodizzato finitura per una vita di servizio coraggioso.
119.9CHF0CHF 119.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Rock-Solid, Low-Profile Mount for Popular Harris Bipods
The Badger Ordnance Low-Profile Harris Bipod Mount replaces your current mounting plate and thumbscrew to provide a more streamlined, lower-profile attachment point for Harris Engineering swivel-style bipods. It can be easily installed for use with any Harris BRM-S bipod in just a few minutes. Badger Ordnance’s engineers designed the Low-Profile Harris Bipod Mount to be strong enough that it can even be used for barricade-braced shooting without the risk of the mount breaking. For use with Harris BRM-S bipods Includes all necessary mounting hardware - Installation tool is not included Picatinny model attaches to any MIL-STD 1913 Picatinny accessory rail M-LOK® attaches to any handguard with Magpul M-LOK® attachment points The strength of Badger Ordnance’s Low-Profile Harris Bipod Mount comes from its construction. It’s machined from extra-strong 7075 T6 aluminum alloy - no flimsy plastic parts to fail - with a tough, corrosion-resistant Type III hardcoat anodized finish for a lifetime of stalwart service.
Altro...
Solido come una roccia, basso profilo Mount per popolare Harris Bipods
Montare il Badger Ordnance Low-Profile Harris bipiede sostituisce il vostro attuale piastra di montaggio e la vite a testa zigrinata per fornire un punto di attacco più snella, più basso profilo per Harris ingegneria bipods girevole-stile. Può essere facilmente installato per l'utilizzo con qualsiasi bipiede Harris BRM-S in pochi minuti. Gli ingegneri di Badger Ordnance progettato il monte basso profilo bipiede Harris di essere abbastanza forte che può essere utilizzato anche per barricata a braccia tiro senza il rischio di rottura del Monte. Per uso con bipiedi Harris BRM-S comprende tutto l'hardware necessario per il montaggio - strumento di installazione non è incluso il modello Picatinny attribuisce al qualsiasi MIL-STD 1913 Picatinny rail accessorio M-LOK® attribuisce al qualsiasi handguard con morsetti Magpul M-LOK® collegamento punti RAC direttamente a qualsiasi guida di Remington RAC la forza di basso profilo Harris bipiede Mount di Badger Ordnance deriva dalla sua costruzione. Esso è lavorato dalla lega di alluminio 7075 T6 extra-forte - nessuna parte in plastica fragile mancato - con una resistente, resistente alla corrosione di tipo III hardcoat anodizzato finitura per una vita di servizio coraggioso.
Altro...
Punteggi dei clienti per BADGER ORDNANCE LOW PROFILE HARRIS MOUNT PICATINNY
Numero di punteggi: 1
Da brownells.com: 1
Punteggio medio: 5
A must have(12.08.2018)
This mount is a must have for any SBRM Harris bipod. It replaces the sling stud mount and mounts directly to a picatinnny rail section. It allows for a much lower profile than using an adapter and creates a rock solid attachment that wonât come lose or rotate or slide around like the stock mount. Itâs obviously more expensive than buying a $20 YHM adapter, but it shaves about 2oz, is lower profile, and far more solid. It is not QD, but I never remove my bipods so this is actually a pro for me as it saves weight and size compared to a QD mount.