Features: CASV-14 comes in the highly requested Extended Length Rail extends all the way back to the rifle’s stripper clip guide Aircraft aluminum alloy construction with steel mounting hardware Will not interfere with any Mil-spec (wood or fiberglass) or aftermarket buttstock assembly Three secured mounting points; on at the stripper clip guide, the second at the rear of the barrel, and the third around the operating rod guide From the operating rod guide forward, the CASV-14 does not touch the barrel Fits most platforms, except for some heavy barrel systems, including National Match, M21 and M25 systems. Standard Milspec barrel configurations only. The operating rod guide has to be fully exposed (front and back) for the CASV-14 to mount Two quick detachable sling mounting holes Multiple mounting points for Picatinny rail sections Grooved Picatinny rail allows for the use of iron sights Weight: 13.5 oz Overall length (rail): 17 inches Overall length (handguard chassis): 12.75 inches Width (rear of handguard): 1.900 inches Width (front of handguard): 1.650 inches Benefits: Extended length rail allows for various optics to be mounted Three secured mounting points allow for a rigid mounting platform, while placing minimal stress on the barrel Modular construction allows for Quick Detach sling swivels, additional rails, and accessories to be attached to the CASV-14 The CASV-14 does not permanently alter the M1A/M14 and still allows for iron sights to be used
Mehr...
Features: CASV-14 wird in der begehrten Extended Length Rail geliefert, die sich bis zur Abstreifklammer des Gewehrs erstreckt. Konstruktion aus Aluminiumlegierung für Flugzeuge mit Stahlbefestigung. Beeinträchtigt keine Mil-Spec- (Holz oder Glasfaser) oder Aftermarket-Schaftkappenbaugruppe. Drei gesicherte Befestigungspunkte; An der Stripper-Clip-Führung, an der zweiten an der Rückseite des Laufs und an der dritten um die Führung der Betätigungsstange herum. Von der Führung der Betätigungsstange an berührt der CASV-14 den Lauf nicht. Passt auf die meisten Plattformen, mit Ausnahme einiger schwerer Laufsysteme , einschliesslich der Systeme National Match, M21 und M25. Nur Standard-Milspec-Laufkonfigurationen. Die Führung der Betätigungsstange muss vollständig freigelegt sein (Vorder- und Rückseite), damit der CASV-14 montiert werden kann. Zwei schnell abnehmbare Befestigungslöcher für Schlingen Mehrere Befestigungspunkte für Picatinny-Schienenabschnitte Die Picatinny-Rillenschiene ermöglicht die Verwendung von Visieren aus Eisen. Gewicht: 13,5 oz Gesamtlänge (Schiene): 17 Zoll Gesamtlänge (Handschutzgehäuse): 12,75 Zoll Breite (Rückseite des Handschutzes): 1,900 Zoll Breite (Vorderseite des Handschutzes): 1,650 Zoll Vorteile: Die verlängerte Schiene ermöglicht die Montage verschiedener Optiken. Drei gesicherte Montagepunkte ermöglichen für eine starre Montageplattform bei minimaler Belastung des Laufs Die modulare Bauweise ermöglicht das Anbringen von Quick Detach-Hebebändern, zusätzlichen Schienen und Zubehörteilen am CASV-14. Der CASV-14 verändert den M1A / M14 nicht dauerhaft und erlaubt es dennoch für Eisenvisiere verwendet werden
Mehr...
Kundenbewertungen zu VLTOR WEAPON SYSTEMS M14/M1A UPPER RAIL SYSTEM BLACK
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
VLTOR Upper Rail System(21.05.2016)
Mounted on my SA Scout Squad. I have the whole VLTOR nine yards on this weapon. You will need to remove the stripper clip guide to install this. Make sure you understand how the dovetail works, as it only installs and de-installs in ONE direction. REMOVE - right to left. INSTALL - left to right. You can damage your recvr. if you don't pay attention. I use the iron sights(non scoped) and you can sight right down the top rail as the front and rear sight picture is perfect. I don't consider "fitting required" a con.
Artikel-Nr.: 100009532 VLTOR WEAPON SYSTEMS M14/M1A UPPER RAIL SYSTEM BLACK Herstellerproduktnummer: CASV14 Features: CASV-14 wird in der begehrten Extended Length Rail geliefert, die sich bis zur Abstreifklammer des Gewehrs erstreckt. Konstruktion aus Aluminiumlegierung für Flugzeuge mit Stahlbefestigung. Beeinträchtigt keine Mil-Spec- (Holz oder Glasfaser) oder Aftermarket-Schaftkappenbaugruppe. Drei gesicherte Befestigungspunkte; An der Stripper-Clip-Führung, an der zweiten an der Rückseite des Laufs und an der dritten um die Führung der Betätigungsstange herum. Von der Führung der Betätigungsstange an berührt der CASV-14 den Lauf nicht. Passt auf die meisten Plattformen, mit Ausnahme einiger schwerer Laufsysteme , einschliesslich der Systeme National Match, M21 und M25. Nur Standard-Milspec-Laufkonfigurationen. Die Führung der Betätigungsstange muss vollständig freigelegt sein (Vorder- und Rückseite), damit der CASV-14 montiert werden kann. Zwei schnell abnehmbare Befestigungslöcher für Schlingen Mehrere Befestigungspunkte für Picatinny-Schienenabschnitte Die Picatinny-Rillenschiene ermöglicht die Verwendung von Visieren aus Eisen. Gewicht: 13,5 oz Gesamtlänge (Schiene): 17 Zoll Gesamtlänge (Handschutzgehäuse): 12,75 Zoll Breite (Rückseite des Handschutzes): 1,900 Zoll Breite (Vorderseite des Handschutzes): 1,650 Zoll Vorteile: Die verlängerte Schiene ermöglicht die Montage verschiedener Optiken. Drei gesicherte Montagepunkte ermöglichen für eine starre Montageplattform bei minimaler Belastung des Laufs Die modulare Bauweise ermöglicht das Anbringen von Quick Detach-Hebebändern, zusätzlichen Schienen und Zubehörteilen am CASV-14. Der CASV-14 verändert den M1A / M14 nicht dauerhaft und erlaubt es dennoch für Eisenvisiere verwendet werden
469.9CHF0CHF 469.90
*
Wird nach Ihrer Bestellung beim Lieferanten beschafft Lieferzeit ca. 8-16 Wochen.
Features: CASV-14 comes in the highly requested Extended Length Rail extends all the way back to the rifle’s stripper clip guide Aircraft aluminum alloy construction with steel mounting hardware Will not interfere with any Mil-spec (wood or fiberglass) or aftermarket buttstock assembly Three secured mounting points; on at the stripper clip guide, the second at the rear of the barrel, and the third around the operating rod guide From the operating rod guide forward, the CASV-14 does not touch the barrel Fits most platforms, except for some heavy barrel systems, including National Match, M21 and M25 systems. Standard Milspec barrel configurations only. The operating rod guide has to be fully exposed (front and back) for the CASV-14 to mount Two quick detachable sling mounting holes Multiple mounting points for Picatinny rail sections Grooved Picatinny rail allows for the use of iron sights Weight: 13.5 oz Overall length (rail): 17 inches Overall length (handguard chassis): 12.75 inches Width (rear of handguard): 1.900 inches Width (front of handguard): 1.650 inches Benefits: Extended length rail allows for various optics to be mounted Three secured mounting points allow for a rigid mounting platform, while placing minimal stress on the barrel Modular construction allows for Quick Detach sling swivels, additional rails, and accessories to be attached to the CASV-14 The CASV-14 does not permanently alter the M1A/M14 and still allows for iron sights to be used
Mehr...
Features: CASV-14 wird in der begehrten Extended Length Rail geliefert, die sich bis zur Abstreifklammer des Gewehrs erstreckt. Konstruktion aus Aluminiumlegierung für Flugzeuge mit Stahlbefestigung. Beeinträchtigt keine Mil-Spec- (Holz oder Glasfaser) oder Aftermarket-Schaftkappenbaugruppe. Drei gesicherte Befestigungspunkte; An der Stripper-Clip-Führung, an der zweiten an der Rückseite des Laufs und an der dritten um die Führung der Betätigungsstange herum. Von der Führung der Betätigungsstange an berührt der CASV-14 den Lauf nicht. Passt auf die meisten Plattformen, mit Ausnahme einiger schwerer Laufsysteme , einschliesslich der Systeme National Match, M21 und M25. Nur Standard-Milspec-Laufkonfigurationen. Die Führung der Betätigungsstange muss vollständig freigelegt sein (Vorder- und Rückseite), damit der CASV-14 montiert werden kann. Zwei schnell abnehmbare Befestigungslöcher für Schlingen Mehrere Befestigungspunkte für Picatinny-Schienenabschnitte Die Picatinny-Rillenschiene ermöglicht die Verwendung von Visieren aus Eisen. Gewicht: 13,5 oz Gesamtlänge (Schiene): 17 Zoll Gesamtlänge (Handschutzgehäuse): 12,75 Zoll Breite (Rückseite des Handschutzes): 1,900 Zoll Breite (Vorderseite des Handschutzes): 1,650 Zoll Vorteile: Die verlängerte Schiene ermöglicht die Montage verschiedener Optiken. Drei gesicherte Montagepunkte ermöglichen für eine starre Montageplattform bei minimaler Belastung des Laufs Die modulare Bauweise ermöglicht das Anbringen von Quick Detach-Hebebändern, zusätzlichen Schienen und Zubehörteilen am CASV-14. Der CASV-14 verändert den M1A / M14 nicht dauerhaft und erlaubt es dennoch für Eisenvisiere verwendet werden
Mehr...
Kundenbewertungen zu VLTOR WEAPON SYSTEMS M14/M1A UPPER RAIL SYSTEM BLACK
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
VLTOR Upper Rail System(21.05.2016)
Mounted on my SA Scout Squad. I have the whole VLTOR nine yards on this weapon. You will need to remove the stripper clip guide to install this. Make sure you understand how the dovetail works, as it only installs and de-installs in ONE direction. REMOVE - right to left. INSTALL - left to right. You can damage your recvr. if you don't pay attention. I use the iron sights(non scoped) and you can sight right down the top rail as the front and rear sight picture is perfect. I don't consider "fitting required" a con.