Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
Spécifications : caoutchouc de Sorbothane, noir. 6"(15cm) x 5" (12cm), 1/16 po (1,5 mm), 3/16"(4,7 mm), 1/8 po (3,1 mm), 1/4" (6,35).
Plus...
Évaluations client de KICK-EEZ CHEEK-EEZ 1/16" THICK BLACK
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.
Référence: 440703116 KICK-EEZ CHEEK-EEZ 1/16" THICK BLACK Ref Fabricant: 703116703412000544 Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
18.9CHF0CHF 18.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 440703140 KICK-EEZ CHEEK-EEZ 1/4" THICK BLACK Ref Fabricant: 703140730412000564 Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
27.9CHF13CHF 27.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 440703180 KICK-EEZ CHEEK-EEZ 1/8" THICK BLACK Ref Fabricant: 703-180730412000557 Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
27.9CHF1CHF 27.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 440703316 KICK-EEZ CHEEK-EEZ 3/16" THICK BLACK Ref Fabricant: 703316730412000526 Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
25.9CHF0CHF 25.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Peau et bâton à n'importe quel busc et mettre un terme à la sensation de battement vers le haut et mal le lendemain de la prise de vue. Véritable, Sorbothane ®, recul absorbant en caoutchouc est pré découpés avec un dos adhésif pour tenir rapidement sur dur-coups de fusils ou carabines. Trois épaisseurs permettent peigne rapide, réglages de la hauteur.
Spécifications : caoutchouc de Sorbothane, noir. 6"(15cm) x 5" (12cm), 1/16 po (1,5 mm), 3/16"(4,7 mm), 1/8 po (3,1 mm), 1/4" (6,35).
Plus...
Évaluations client de KICK-EEZ CHEEK-EEZ 1/16" THICK BLACK
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.