Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Altro...
Drop-in Trigger lavoro per,22 pistole
Precisione lavorata da billetta per una misura precisa per ridurre il peso di scatto ed eliminare la pesante pressione necessaria per spostare la parte di fabbrica. Aiuta a produrre un più coerente pull per maggiore precisione. Vite di arresto è regolabile in corsa e pretravel con la pistola completamente assemblata, in modo da ottenere un tiro no-strisciamento. Scarpa ultra-liscia offre più contatto con il grilletto facile. Disponibili in alluminio anodizzato nero o acciaio inox lucido (SS). Include trigger molla e pistone molla grilletto.
Specifiche: alluminio, anodizzato grigio, nero, o in acciaio inox, naturale argento finitura.. 354"(9mm) faccia di scarpa trigger ampio. Si adatta Ruger ® Mark I, Mark II ™, Mark III ™ e 22/45 ™ pistole.
Altro...
Punteggi dei clienti per VOLQUARTSEN RUGER® TARGET TRIGGER, SS
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.
N. prodotto: 930000123 VOLQUARTSEN RUGER® TARGET TRIGGER, SS Parti Fabbricante: VC2TTST810162012441 Precisione lavorata da billetta per una misura precisa per ridurre il peso di scatto ed eliminare la pesante pressione necessaria per spostare la parte di fabbrica. Aiuta a produrre un più coerente pull per maggiore precisione. Vite di arresto è regolabile in corsa e pretravel con la pistola completamente assemblata, in modo da ottenere un tiro no-strisciamento. Scarpa ultra-liscia offre più contatto con il grilletto facile. Disponibili in alluminio anodizzato nero o acciaio inox lucido (SS). Include trigger molla e pistone molla grilletto.
74.9CHF3CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerFinitura: Acciaio inoxModello: Mark III, Mark I, Mark IITipo: Regolabili, Drop-In, Curved
Adatto per:
Ruger
Finitura:
Acciaio inox
Modello:
Mark I,Mark II,Mark III
Tipo:
Regolabili,Curved,Drop-In
Peso della spedizione: 0.023kgAltezza di spedizione: 15mmLarghezza di spedizione: 71mmLunghezza di spedizione: 86mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.c
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N. prodotto: 930012002 VOLQUARTSEN RUGER® TARGET TRIGGER, BLACK Parti Fabbricante: VC2TT810162011475 Precisione lavorata da billetta per una misura precisa per ridurre il peso di scatto ed eliminare la pesante pressione necessaria per spostare la parte di fabbrica. Aiuta a produrre un più coerente pull per maggiore precisione. Vite di arresto è regolabile in corsa e pretravel con la pistola completamente assemblata, in modo da ottenere un tiro no-strisciamento. Scarpa ultra-liscia offre più contatto con il grilletto facile. Disponibili in alluminio anodizzato nero o acciaio inox lucido (SS). Include trigger molla e pistone molla grilletto.
59.9CHF3CHF 59.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: RugerFinitura: NeroModello: Mark I, Mark IITipo: Regolabili, Drop-In, Curved
Adatto per:
Ruger
Finitura:
Nero
Modello:
Mark I,Mark II
Tipo:
Regolabili,Drop-In,Curved
Peso della spedizione: 0.023kgAltezza di spedizione: 8mmLarghezza di spedizione: 70mmLunghezza di spedizione: 88mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.c
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.
SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.
Altro...
Drop-in Trigger lavoro per,22 pistole
Precisione lavorata da billetta per una misura precisa per ridurre il peso di scatto ed eliminare la pesante pressione necessaria per spostare la parte di fabbrica. Aiuta a produrre un più coerente pull per maggiore precisione. Vite di arresto è regolabile in corsa e pretravel con la pistola completamente assemblata, in modo da ottenere un tiro no-strisciamento. Scarpa ultra-liscia offre più contatto con il grilletto facile. Disponibili in alluminio anodizzato nero o acciaio inox lucido (SS). Include trigger molla e pistone molla grilletto.
Specifiche: alluminio, anodizzato grigio, nero, o in acciaio inox, naturale argento finitura.. 354"(9mm) faccia di scarpa trigger ampio. Si adatta Ruger ® Mark I, Mark II ™, Mark III ™ e 22/45 ™ pistole.
Altro...
Punteggi dei clienti per VOLQUARTSEN RUGER® TARGET TRIGGER, SS
Numero di punteggi: 7
Da brownells.com: 7
Punteggio medio: 4.4
Far better than their aluminum trigger(25.02.2012)
Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.
Nice touch for Mark III(08.03.2012)
The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .
Money Well Spent!!!(08.05.2014)
High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!
VOLQUARTSEN MK322/45 Trigger(14.05.2014)
I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised. Tom
Better have extra set screws(15.09.2011)
Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.
Works like a dream(10.03.2012)
Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )
Works very well.(02.05.2013)
This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.