Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

DLASK ARMS
SEMI-AUTO ULTRA-LIGHT TRIGGERS

253100010

Magnesium & Titanium For Strength; Adjustable For Take-Up & Overtravel; Para-Ord. Models, Too

Titanium stirrup, magnesium shoe and two-way adjustability provide the best combination of strength, lower weight and crisp feeling response for an ultra-light, match quality trigger pull without flex, take-up or overtravel.

SPECS: Magnesium shoe, titanium stirrup, silver finish. Long - 2.335" (5.9cm).

Altro...

Magnesio & titanio per forza; Regolabile per tendifilo & extra corsa; Para-Ord. modelli, troppo

Staffa di titanio, magnesio scarpa e regolabilità bidirezionali forniscono la migliore combinazione di resistenza, peso inferiore e risposta sensazione croccante per un ultraleggero, abbinare il tiro di innesco di qualità senza flex, adozione o extra corsa. Alleggerimenti non disponibile sui modelli corti.

Caratteristiche: scarpa di magnesio, staffe di titanio, finitura argento. Disponibile a breve - 2,124 (cm 5,4), MED. - 2,187"(5,6 cm), lunghi - 2,335" (5,9 cm), scarpa: 1911 e. Para -. 245"(6,2 cm) largo, Coppa d'oro; 352"(8.9 millimetri) largamente. . 2 oz (6g) peso.

Altro...

Punteggi dei clienti per DLASK ARMS LONG PARA-ORDNANCE TRIGGER

Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 3.6

A little more work (31.08.2012)

than I though there woul be. I installed the same trigger in my old Bullseye pistol years ago, with only a little fitting & polishing of the bow needed. This time, I had to trim the shoe for height and width to fit the trigger window and trim & polish the bow to fit the ways. The final adjustment was a little squeeze on the bow for final fitting. Once completed it's slicker than goose-grease!

Not sure (16.04.2010)

I bought on for my P14-45 and my P16-40. For some reason, the one in the 16-40 corroded and not needs to be replaced. The one in the 14-45 seems fine. Don't know why one "behaved" and the other didn't, but I'd advise sticking with aluminum.

Don't waste your time (25.08.2009)

I was looking for something different for my custom Colt, I saw this and like the looks, I purchased the product and when I went to install, it would not fit. The shoe was to wide; as well as, the trigger was too tall and wide. I realize that some fitting is required but this trigger required too much and for the price you think it would be a little more too tolerance. Don't waste your time with product.

Great Trigger (27.11.2009)

Exactly what I was shopping for to fit into a Gold Cup frame and a Series 70 Govt frame. Yes like the previous comment says you need to hand fit this trigger, it is not a drop in and go but if you want the perfection of a fitted trigger this is the way to go. The only negative I have on it is that the finish on the "finger" side will smooth down and change texture and look.

not for idiots (29.03.2010)

I love it when non gunsmiths whine because their custom fit parts dont jump off the ups truck and install themselves.I have used this trigger in three different pistols of my own and installed it on a dozen more trigger jobs, it has been flawless every time. yes it requires fitting, (that means it is oversized, it is really hard to make a part bigger if it is undersized) but it is a very nice trigger if you know what you are doing, and if you don't, dont try and do a trigger rplacement with this or any trigger.

Not satisfied (25.12.2010)

Loose fit on the bow side to side in the frame. The front tabs on the bow were not large enough to provide any custom fitting. The Shoe required extensive fitting.

awesome trigger (18.03.2012)

love the extreme light weight. adjustment tabs make fitting easy. best trigger ever for the Para wide body.

Definately NOT drop in! (12.08.2018)

This trigger is super light yet built much stronger than the "K hole" I initially installed. If you are looking for a "drop in trigger" this isn't it. Fitting took over an hour and you will need the Brownells trigger stirrup of something similar. Everything is "oversize" for better fit and the shoe was off axis and canted which took a while to sort out. Once the geometry was correct, fitting was easier. I wound up filing on both sides and top and bottom so refinishing using a blast of baking soda was necessary to bring the finish back. I really like the way this trigger looks but it's not simple project.

<img width="500" src='/userdocs/reviewimages/f50404f5-adca-49ce-90e3-fdd827cc83d4.jpg' alt=''>

Overpriced and not functional (15.10.2010)

Bought this trigger thinking that if I spent the kind of money Dlask is asking, that I should get a decent trigger. I was wrong. I had a gunsmith fit it and work on it to begin with. It felt like it was full of gravel and was way worse than stock. He said it was due to the materials in the trigger. I have since put about 8 man hours into polishing every part on my Para that the trigger touches, and polishing the bow and shoe. Still feels like its got gravel in it. In fact its so bad my trigger finger gets tired after shooting the gun. It seems like everything I do to this trigger makes it worse. [...]Its ridiculous.The Gun Craft trigger I had before was much better and I wish I would have kept that one..

Needs LOTS of fitting (28.10.2010)

My gunsmith hated putting this in a para p14. Fit was awful and the final product isnt what it should be for the price. Next project gets a GunWorks trigger.

The best trigger for my builds (13.01.2011)

This is the best competition trigger and my customers ask for it by name. I use the Dlask trigger whenever the finished product has to be a fine racegun used in competitions. It's of incredibly light weight and it allows for very minute adjustments. Yes, it requires fitting by a gunsmith who knows what he's doing, but the final result is worth the price of the trigger and labour.

My only choice for competition guns (08.05.2012)

Yes, it DOES take a lot of work to fit one correctly, but once it's done there's nothing sweeter. I love the rounded feel of the shoe.
The doublestack trigger is harder to fit properly than the single stack version but either way it's worth it. Make sure you know what you're doing! I have this trigger in a 1640 with a 1-lb 6-oz pull.

great trigger super light (28.08.2014)

Para p14 to get rid of plastic lots of grinding on bow but supper tight fit shoe not bad . Hardest part is polishing Inside of frame were bow pushes out all the way down all these metals grab each othere

Worth every penny! (06.08.2010)

This trigger dropped right in my Citadel Compact 45. Very light trigger with easy adjustments. I have no play in the trigger, just click-bang. Looks great and worth every penny in my opinion. This trigger is unique. I love it!

the best for the money ! (29.07.2012)

These can be time consuming to fit , but are worth both the money
and the time.
You can get rid of all take-up and over-travel and have a crisp,
"right there " trigger , I have them in four 1911's and one in a STI 2011.
I am very happy with them!!!

Leggi più recensioni su brownells.com

0 0 1 CHF

N. prodotto: 253100010
DLASK ARMS LONG PARA-ORDNANCE TRIGGER
Parti Fabbricante: POLT1MG Staffa di titanio, magnesio scarpa e regolabilità bidirezionali forniscono la migliore combinazione di resistenza, peso inferiore e risposta sensazione croccante per un ultraleggero, abbinare il tiro di innesco di qualità senza flex, adozione o extra corsa. Alleggerimenti non disponibile sui modelli corti.

Avvisa quando diventa disponibile

Non disponibile.

Caratteristiche: Adatto per: 1911 Finitura: Silver Modello: Government, Commander, Officers Tipo: Curved, Long, Solid

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: 1911 Finitura: Silver Modello: Government,Commander,Officers Tipo: Curved,Long,Solid Peso della spedizione: 0.009kg Altezza di spedizione: 25mm Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm

Dettagli dell'elemento

Classificazione per l'export dagli US: 0A501.c

Magnesium & Titanium For Strength; Adjustable For Take-Up & Overtravel; Para-Ord. Models, Too

SPECS: Magnesium shoe, titanium stirrup, silver finish. Long - 2.335" (5.9cm).

Altro...

Magnesio & titanio per forza; Regolabile per tendifilo & extra corsa; Para-Ord. modelli, troppo

Altro...

Punteggi dei clienti per DLASK ARMS LONG PARA-ORDNANCE TRIGGER

Numero di punteggi: 15
Da brownells.com: 15
Punteggio medio: 3.6

A little more work (31.08.2012)

Not sure (16.04.2010)

Don't waste your time (25.08.2009)

Great Trigger (27.11.2009)

not for idiots (29.03.2010)

Not satisfied (25.12.2010)

Loose fit on the bow side to side in the frame. The front tabs on the bow were not large enough to provide any custom fitting. The Shoe required extensive fitting.

awesome trigger (18.03.2012)

love the extreme light weight. adjustment tabs make fitting easy. best trigger ever for the Para wide body.

Definately NOT drop in! (12.08.2018)

Overpriced and not functional (15.10.2010)

Needs LOTS of fitting (28.10.2010)

My gunsmith hated putting this in a para p14. Fit was awful and the final product isnt what it should be for the price. Next project gets a GunWorks trigger.

The best trigger for my builds (13.01.2011)

My only choice for competition guns (08.05.2012)

great trigger super light (28.08.2014)

Worth every penny! (06.08.2010)

the best for the money ! (29.07.2012)

Leggi più recensioni su brownells.com

Scelti da altri clientie

TAYLORS AND CO. PIETTA, 1858 REM CONVERSION CYLINDER 44 TO 45LC
REVOLVER CARTRIDGE CONVERSION CYLINDER

TAYLORS AND CO.

In magazzino

CHF 489.90 * CHF 489.90 - CHF 569.90*

Tamburi

4.1

WILSON COMBAT 1911 47D 8RD MAGAZINE 3 PACK NO MAG POUCH
1911 8RD 45ACP 47D MAGAZINE KITS

WILSON COMBAT

In magazzino

CHF 139.90 * CHF 139.90 - CHF 169.90*

Caricatori

4.5

HARRISON DESIGN & CONSULTING ORIG. COMM IGNITION SET RD HOLE
1911 IGNITION SET WITH COMMANDER HAMMER

HARRISON DESIGN & CONSULTING

Riordinato

CHF 219.90 * CHF 114.90 - CHF 249.90*

Kit di grippanti | Cane

ACCU-SHOT LOCKING MONOPOD STUD 4.75-5.75" QUICK KNOB
STUD MOUNT MONOPODS

ACCU-SHOT

In magazzino

CHF 144.90 * CHF 134.90 - CHF 149.90*

Monopiedi

WILSON COMBAT 1911 BULLET PROOF BEAVERTAIL CONCEALMENT SAFETY
1911 BULLET PROOF CONCEALMENT BEAVERTAIL GRIP SAFETY

WILSON COMBAT

In magazzino

CHF 124.90 *

Sicura

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.