Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Altro...
Extra-lunghi rotaie per fabbrica forati & tappata botti
Leggero, ferrovia extra-lunga portata fornisce l'abbondanza di lunghezza quindi pupillare può essere adattato precisamente per ogni, singolo tiratore. Partite recenti, fabbrica forato e filettato barili; forare e toccare più vecchi barili. Accetta tutti gli anelli Weaver-stile.
Specifiche: alluminio, nero, anodizzato finitura. 6 (cm 15) lunghe. Modelli separati per 7" Long o 5-1/2" canna lunga pesante. Include le viti, le istruzioni.
Altro...
Punteggi dei clienti per LSP 7" SMITH & WESSON
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Great Optic Mount Rail for the S&W M41(20.07.2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20.10.2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.
N. prodotto: 530041007 LSP 7" SMITH & WESSON Parti Fabbricante: 530041007 Leggero, ferrovia extra-lunga portata fornisce l'abbondanza di lunghezza quindi pupillare può essere adattato precisamente per ogni, singolo tiratore. Partite recenti, fabbrica forato e filettato barili; forare e toccare più vecchi barili. Accetta tutti gli anelli Weaver-stile.
64.9CHF1CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore: BlackMateriale: AlluminioModello: 41Numero di basi: 1 pezzoTipo: Basi stile Weaver
Adatto per:
Smith & Wesson
Colore:
Black
Materiale:
Alluminio
Modello:
41
Numero di basi:
1 pezzo
Tipo:
Basi stile Weaver
Peso della spedizione: 0.091kgAltezza di spedizione: 10mmLarghezza di spedizione: 81mmLunghezza di spedizione: 191mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 530041055 LSP 5-1/2" SMITH & WESSON Parti Fabbricante: 530041055 Leggero, ferrovia extra-lunga portata fornisce l'abbondanza di lunghezza quindi pupillare può essere adattato precisamente per ogni, singolo tiratore. Partite recenti, fabbrica forato e filettato barili; forare e toccare più vecchi barili. Accetta tutti gli anelli Weaver-stile.
64.9CHF4CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Smith & WessonColore: BlackMateriale: AlluminioModello: 41Numero di basi: 1 pezzoTipo: Basi stile Weaver
Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Altro...
Extra-lunghi rotaie per fabbrica forati & tappata botti
Leggero, ferrovia extra-lunga portata fornisce l'abbondanza di lunghezza quindi pupillare può essere adattato precisamente per ogni, singolo tiratore. Partite recenti, fabbrica forato e filettato barili; forare e toccare più vecchi barili. Accetta tutti gli anelli Weaver-stile.
Specifiche: alluminio, nero, anodizzato finitura. 6 (cm 15) lunghe. Modelli separati per 7" Long o 5-1/2" canna lunga pesante. Include le viti, le istruzioni.
Altro...
Punteggi dei clienti per LSP 7" SMITH & WESSON
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Great Optic Mount Rail for the S&W M41(20.07.2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20.10.2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.