Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. For low-stress applications where the mag will not be ejected onto hard surfaces. Use the L-shaped locking insert for extra-secure attachment and five additional rounds for 40S&W or an additional six rounds for 9mm. Overall magazine length will remain below 140mm for competition use.
SPECS: Fiberglass-filled nylon, black.
Mehr...
Das zweiteilige, verlängerte Basispad ersetzt das werkseitige Pad, um die Magazinkapazität zu erhöhen, ohne die Zuverlässigkeit zu beeinträchtigen. Aus schlagfestem, glasfaserverstärktem Nylon geformt, um Ihr Magazin vor Beschädigungen zu schützen, wenn es auf harten Untergrund oder Gehweg geworfen wird. Die karierte Unterseite hilft bei schnellen, positiven, rutschfesten Magnetwechseln. Sichert den Magazinkörper und lässt Sie die Werksmagazinfeder festhalten. Lässt sich schnell und einfach entfernen, um das Werks-Pad wieder einzubauen und das Mag auf die ursprüngliche Spezifikation zurückzusetzen. Für Anwendungen mit geringer Beanspruchung, bei denen das Magazin nicht auf harte Oberflächen ausgestossen wird. Verwenden Sie den L-förmigen Verriegelungseinsatz für eine besonders sichere Befestigung und fünf zusätzliche Patronen für 40S & W oder sechs zusätzliche Patronen für 9 mm. Die Gesamtlänge des Magazins bleibt für Wettbewerbszwecke unter 140 mm.
Technische Daten: Mit Fiberglas gefülltes Nylon, schwarz.
Mehr...
Kundenbewertungen zu ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Works as good as factory original(27.06.2010)
I've never had a problem with the base pads. A bit of a hassle to get on and you have to keep the magazine spring fresh if using OEM length but otherwise you can put these base pads on and forget about them. They stay on the tube too.
I just wish it was metal.(28.06.2014)
For the price these seem very well made.
For the Just started using them, and Iâm pleased so fare.
Time will tell after a number load and reloads of the mag and my S&W9. I just hope they last for the slapping in the mags with the force I use to insert the mag in the gun.
thats amason , great , excelente (09.10.2017)
I ordered 1 just to see what they were all about. The install was a little difficult but it was accomplished without producing a hernia. I do like the way it looks . The additional surface area this provides can be used to increase your " grip purchase " on your firearm.. So for a nominal amount of weight . You can increase mag capacity by approx 34% for a 9mm - 17 round magazine . Thats 6 rounds of 9mm ammo. I wished I would have ordered 2 instead of only 1 , because now as of this review they are back ordered.
Artikel-Nr.: 069000032 ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL Herstellerproduktnummer: SWMP940 Das zweiteilige, verlängerte Basispad ersetzt das werkseitige Pad, um die Magazinkapazität zu erhöhen, ohne die Zuverlässigkeit zu beeinträchtigen. Aus schlagfestem, glasfaserverstärktem Nylon geformt, um Ihr Magazin vor Beschädigungen zu schützen, wenn es auf harten Untergrund oder Gehweg geworfen wird. Die karierte Unterseite hilft bei schnellen, positiven, rutschfesten Magnetwechseln. Sichert den Magazinkörper und lässt Sie die Werksmagazinfeder festhalten. Lässt sich schnell und einfach entfernen, um das Werks-Pad wieder einzubauen und das Mag auf die ursprüngliche Spezifikation zurückzusetzen. Für Anwendungen mit geringer Beanspruchung, bei denen das Magazin nicht auf harte Oberflächen ausgestossen wird. Verwenden Sie den L-förmigen Verriegelungseinsatz für eine besonders sichere Befestigung und fünf zusätzliche Patronen für 40S & W oder sechs zusätzliche Patronen für 9 mm. Die Gesamtlänge des Magazins bleibt für Wettbewerbszwecke unter 140 mm.
36.9CHF9CHF 36.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Art: Base PadsHersteller/Modell: Smith & WessonModell: M&P
Two-piece, extended base pad replaces factory pad to increase magazine capacity without compromising reliability. Molded from impact-resistant, fiberglass-reinforced nylon to protect your magazine from damage when ejected onto hard ground or pavement. Checkered bottom panel assists in fast, positive, non-slip, mag changes. Locks securely to the magazine body and lets you retain the factory magazine spring. Removes quickly and easily to reinstall factory pad and return mag to original spec. For low-stress applications where the mag will not be ejected onto hard surfaces. Use the L-shaped locking insert for extra-secure attachment and five additional rounds for 40S&W or an additional six rounds for 9mm. Overall magazine length will remain below 140mm for competition use.
SPECS: Fiberglass-filled nylon, black.
Mehr...
Das zweiteilige, verlängerte Basispad ersetzt das werkseitige Pad, um die Magazinkapazität zu erhöhen, ohne die Zuverlässigkeit zu beeinträchtigen. Aus schlagfestem, glasfaserverstärktem Nylon geformt, um Ihr Magazin vor Beschädigungen zu schützen, wenn es auf harten Untergrund oder Gehweg geworfen wird. Die karierte Unterseite hilft bei schnellen, positiven, rutschfesten Magnetwechseln. Sichert den Magazinkörper und lässt Sie die Werksmagazinfeder festhalten. Lässt sich schnell und einfach entfernen, um das Werks-Pad wieder einzubauen und das Mag auf die ursprüngliche Spezifikation zurückzusetzen. Für Anwendungen mit geringer Beanspruchung, bei denen das Magazin nicht auf harte Oberflächen ausgestossen wird. Verwenden Sie den L-förmigen Verriegelungseinsatz für eine besonders sichere Befestigung und fünf zusätzliche Patronen für 40S & W oder sechs zusätzliche Patronen für 9 mm. Die Gesamtlänge des Magazins bleibt für Wettbewerbszwecke unter 140 mm.
Technische Daten: Mit Fiberglas gefülltes Nylon, schwarz.
Mehr...
Kundenbewertungen zu ARREDONDO PAD FITS 9MM/.40 S&W M&P,5 OR 6 RDS,1-1/4" ADDL MAG OAL
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Works as good as factory original(27.06.2010)
I've never had a problem with the base pads. A bit of a hassle to get on and you have to keep the magazine spring fresh if using OEM length but otherwise you can put these base pads on and forget about them. They stay on the tube too.
I just wish it was metal.(28.06.2014)
For the price these seem very well made.
For the Just started using them, and Iâm pleased so fare.
Time will tell after a number load and reloads of the mag and my S&W9. I just hope they last for the slapping in the mags with the force I use to insert the mag in the gun.
thats amason , great , excelente (09.10.2017)
I ordered 1 just to see what they were all about. The install was a little difficult but it was accomplished without producing a hernia. I do like the way it looks . The additional surface area this provides can be used to increase your " grip purchase " on your firearm.. So for a nominal amount of weight . You can increase mag capacity by approx 34% for a 9mm - 17 round magazine . Thats 6 rounds of 9mm ammo. I wished I would have ordered 2 instead of only 1 , because now as of this review they are back ordered.