The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Altro...
Il blocco di morsa Sinclair è lo strumento perfetto per tenere saldamente il tuo AR-15/AR-10® in una morsa da banco. Il blocco di morsa inserisce nella vostra rivista bene proprio come una rivista e fondo che metà del blocco può essere bloccata in una morsa. È possibile inclinare il blocco nella morsa per lavorare a un angolo diverso se lo si desidera. È anche possibile inserire il blocco morsa in cima il gruppo inferiore permettendo di lavorare sul lato inferiore. Il blocco morsa è fatto di polietilene ad alta densità lavorata, quindi è estremamente solido. Strumento di grande banco di lavoro. AR-10® modello si inserisce soli fucili di modello Armalite AR-10®, non va bene fucili modello DPMS/SR25.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 2.8
Works great!(09.07.2017)
Has slots for Magazine Catch to positively retain the rifle - push mag release button to remove
Rugged & lubricious HDPE - waaaaay better than my previous block of wood!
MADE IN USA!!!
Doesn't work like simular products(23.10.2010)
This vise block does not fit very well in the lower receiver - DPMS / JD Machine, it is very sloppy and does not lock into place like a magazine does. The vise blocks that I have used in the past fit like a magazine and require you to eject the vise block like a magazine. When in the vise the whole gun moves around because it's so sloppy.
AR10 Block, NOT LR308 block(16.03.2013)
Here is the deal. This is an AR10 block, not an LR308 block. They use different mags, and therefor different vice blocks. Works fine in the rifle it was designed for! (At least the one I ordered does)
DOES NOT FIT(04.04.2017)
DOES not fit in DPMS lowers, have to mill down to make fit
N. prodotto: 430106198 SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM Parti Fabbricante: 14-150 BLEM Il blocco di morsa Sinclair è lo strumento perfetto per tenere saldamente il tuo AR-15/AR-10® in una morsa da banco. Il blocco di morsa inserisce nella vostra rivista bene proprio come una rivista e fondo che metà del blocco può essere bloccata in una morsa. È possibile inclinare il blocco nella morsa per lavorare a un angolo diverso se lo si desidera. È anche possibile inserire il blocco morsa in cima il gruppo inferiore permettendo di lavorare sul lato inferiore. Il blocco morsa è fatto di polietilene ad alta densità lavorata, quindi è estremamente solido. Strumento di grande banco di lavoro. AR-10® modello si inserisce soli fucili di modello Armalite AR-10®, non va bene fucili modello DPMS/SR25.
35.9CHF154CHF 35.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
AR-15
Colore:
White
Finitura:
Opaco
Materiale:
Polyethylene
Peso della spedizione: 0.136kgAltezza di spedizione: 36mmLarghezza di spedizione: 61mmLunghezza di spedizione: 127mm
The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Altro...
Il blocco di morsa Sinclair è lo strumento perfetto per tenere saldamente il tuo AR-15/AR-10® in una morsa da banco. Il blocco di morsa inserisce nella vostra rivista bene proprio come una rivista e fondo che metà del blocco può essere bloccata in una morsa. È possibile inclinare il blocco nella morsa per lavorare a un angolo diverso se lo si desidera. È anche possibile inserire il blocco morsa in cima il gruppo inferiore permettendo di lavorare sul lato inferiore. Il blocco morsa è fatto di polietilene ad alta densità lavorata, quindi è estremamente solido. Strumento di grande banco di lavoro. AR-10® modello si inserisce soli fucili di modello Armalite AR-10®, non va bene fucili modello DPMS/SR25.
Altro...
Punteggi dei clienti per SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 2.8
Works great!(09.07.2017)
Has slots for Magazine Catch to positively retain the rifle - push mag release button to remove
Rugged & lubricious HDPE - waaaaay better than my previous block of wood!
MADE IN USA!!!
Doesn't work like simular products(23.10.2010)
This vise block does not fit very well in the lower receiver - DPMS / JD Machine, it is very sloppy and does not lock into place like a magazine does. The vise blocks that I have used in the past fit like a magazine and require you to eject the vise block like a magazine. When in the vise the whole gun moves around because it's so sloppy.
AR10 Block, NOT LR308 block(16.03.2013)
Here is the deal. This is an AR10 block, not an LR308 block. They use different mags, and therefor different vice blocks. Works fine in the rifle it was designed for! (At least the one I ordered does)
DOES NOT FIT(04.04.2017)
DOES not fit in DPMS lowers, have to mill down to make fit