Pre-Fit Pads That Take The Hurt Out Of Shotgun Shooting
Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits Ruger 77/22 All Weather, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 835/500 fits post-1999 manufactured guns.
Mehr...
Vorfertigte Polster, die den Schmerz beim Schiessen mit der Schrotflinte lindern
Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
SPECS: NAVCOM-Synthesematerial. Schwarz mit schwarzem Basis. Gerippte Oberfläche. Schraubbare Ersatzteile erfordern keine Anpassung für Waffen mit werkseitigem Rückstosspolster. Benelli passt zu 12 Gauge, einschliesslich Holz- und Kunststoff-Schaft M1, Sport und Super Black Eagle sowie Kunststoff-Schaft Super Black Eagle II und Holz-Schaft M2 und Montefeltro. Ruger passt zu Ruger 77/22 All Weather, sowie Sako 75 und Tikka T-3 Lite Kunststoff-Schaft. Browning Gold passt ebenfalls zu Ruger 77 und #1. Mossberg 835/500 passt zu nach 1999 hergestellten Waffen.
Mehr...
Kundenbewertungen zu LIMBSAVER RUGER (RECESSED STOCK)/SAKO 75/TIKKA T-3 LITE, SYNTHETIC
Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 4
Not As Advertised(22.04.2010)
This recoil pad did not come close to fitting the Remington 700 synthetic stock that it was advertised to fit. Limbsaver customer service blamed this on Remington's use of "seven or eight different sub-contractors to produce their stocks". It would appear that odds are likely the product will not fit as advertised.
Fit 870 Police Synthetic Stock Perfectly(19.04.2012)
I bought a used 870P synthetic stock and mounted this pad. It works very well and really tames the gun. The fit was perfect. If you lightly lube the screws, they turn in much easier.
Great recoil pad - no more bruises!(28.07.2013)
Picked this up for my 870 Express, and it's fantastic. My shoulder used to get bruised up after a few 3" slugs, but after putting this on I shot a few boxes and didn't feel anything.
Trap is also easier; can shoot all day and not feel it the next morning.
Works(15.10.2011)
Fit on 338 Win Mag Tikka T-3 Lite Stainless is at least as good as the factory. This rifle weighs exactly 7 pounds with scope, sling, ready to hunt (less ammo), so recoil used to be brutal. This will never be a plinking rifle, but felt recoil is very tolerable. Using my "Virtual 33 Win" deer loads (200gr bullet, 2200 fps), it's more pleasant than a 30-30 Win 94.
Works on a Model 10 Wood Stock Also(01.11.2009)
It's listed for the Model 110, but this fit my Model 10 wood stock perfectly as well. Added a bout 1/2" versus the stock model at about the same weight. A LOT softer.
Works with a 111 Wood Stock(28.02.2016)
I bought a Savage 111 30-06 from Cabela's a couple of years ago. I believe that it was a special production that Savage did for them. I absolutely love the rifle, however it kicks like a mule. There really wasn't much for a recoil pad. I saw this on here and gave it a chance. I am glad that I did. It fits just perfect and only took a couple minutes to install.
Excellent product.(11.02.2011)
Most people use the grind to fit limbsaver recoil pads on their Benelli's. I used this one per limbsavers cross reference suggestion.
This was very easy to adapt to the Benelli M1 Tactical Pistol Grip Stock. It is SIGNIFICANTLY softer than the grind to fit models. Even 3" mag rifled slugs are a breeze to double tap on.
300 Win Mag Rem. 700 LSS(28.06.2011)
I replaced the factory Rem. pad on my 300 win mag with the LimbSaver, it fit great and was easy to put on. First time at the range I fired 18 handloads running 3185 adv-fps with 180 gn. Nos partations and the felt recoil was nill still has the push and muzzle jump but recoil is really cut to very mild. It made a really big difference and I would recommend this pad for anyone that needs to soffen the recoil of a hard shooting rifle, it worked on my 300 Win Mag, best thing I have done to that rifle. I always used a lead sled before when shooting the 300 win mag at the range, now that is not necessary, I can use the bi-pod and shoulder the rifle right, the limbsaver made it enjoyable to shoot.
Fits Marlin 444/336 wood stock(24.10.2012)
A near perfect fit believe it or not. External profile was near spot on but holes for wood screws needed a small amount of massaging to fit the 444SS pistol grip stock. A very nice recoil pad however.
Just about a perfect fit!(18.09.2013)
Bought this recoil pad for my Marlin 336 and the fit was so close to perfect I didn't have to do anything except to re-drill the screw holes to make it perfect! As always Brownell's processed and shipped my order super fast. Thanks
Not Easy To Install(04.11.2016)
Simple installation stated on the package, however installation screws's are not supplied. After a conversation with Brownell's customer service; I was informed installation hardware is not available to be ordered as there is none specified in Brownell's catalog. Brownell tech service stated I would have to find the appropriate hardware and then modify the stock holes to accept the hardware and recoil pad. Not an easy installation as advertised and one that I do not want to undertake. As far as I am concerned, the item is un-useable as advertised and shipped. I do not recommend this item.
Great product!!!!(03.10.2011)
I installed this on my Mossy 835 slug gun (24" rifled and ported bbl). I have a medical condition such that my Drs said NO center fire rifles or shotguns :(. With this pad installed felt recoil is around that of my 5.56 rifles. I could not believe the reduction in recoil from a butt pad!!! Installed easily, the holes actually lined up. Highly recommended.
Pre-Fit Means Doesn't Fit - DO NOT BUY!!(08.10.2014)
Spent $75 for two of these for my pair of Mossberg 500s. THEY DO NOT FIT AT ALL..IT IS NOT EVEN CLOSE. Pre-fit is a lie. The instructions show you where to grind off material so it will fit and it doesn't,so now you can't even return it (will try Brownells customer service tomorrow, but am not getting my hopes up). I bought these supposedly pre-fit pads because there are NO gunsmiths within a reasonable range and now am forced to rely on worn out recoil pads and bird season just getting started. I shoot trap and skeet weekly and hunt as often as possible.
Artikel-Nr.: 100002236 LIMBSAVER RUGER (RECESSED STOCK)/SAKO 75/TIKKA T-3 LITE, SYNTHETIC Herstellerproduktnummer: 10011697438100114 Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
64.9CHF0CHF 64.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 902000060 LIMBSAVER REM. 870, WOOD Herstellerproduktnummer: 10102697438101029 Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
59.9CHF0CHF 59.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 902000062 LIMBSAVER REM. 700 BDL, WOOD Herstellerproduktnummer: 10112697438101128 Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
69.9CHF0CHF 69.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 902000097 LIMBSAVER REM. 700/870/1100/12 GA. 11-87, SYNTHETIC Herstellerproduktnummer: 10101697438101012 Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
64.9CHF0CHF 64.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 100018234 LIMBSAVER MAGPUL MOE, CTR, ACS, L-STR & UBR Herstellerproduktnummer: 10025697438100251 Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
69.9CHF0CHF 69.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Pre-Fit Pads That Take The Hurt Out Of Shotgun Shooting
Designed to specifically fit a wide variety of rifles, shotguns & muzzleloaders, these recoil pads incorporate anti-muzzle jump technology and reduce up to 70% of felt recoil. These recoil pads are installed in seconds and are built for all-weather conditions. Don’t be fooled by competitors who claim to have higher recoil reduction than our pads. Our designs have consistently been proven to outperform every other brand of recoil pad. These no longer come with screws.
SPECS: NAVCOM synthetic material. Black with black base. Ribbed face. Screw-on replacement requires no fitting for guns with factory recoil pad. Benelli fits 12 gauge, including wood and synthetic stocked M1, Sport, and Super Black Eagle, and synthetic stocked Super Black Eagle II, and wood stocked M2 and Montefeltro. Ruger fits Ruger 77/22 All Weather, plus Sako 75 and Tikka T-3 Lite synthetic stocks. Browning Gold also fits Ruger 77 and #1. Mossberg 835/500 fits post-1999 manufactured guns.
Mehr...
Vorfertigte Polster, die den Schmerz beim Schiessen mit der Schrotflinte lindern
Entwickelt, um speziell zu einer Vielzahl von Gewehren, Schrotflinten und Vorderladern zu passen, reduzieren diese Rückstosspolster bis zu 70 % des gefühlten Rückstosses und integrieren die Anti-Muzzle Jump-Technologie. Diese Rückstosspolster lassen sich in Sekunden installieren und sind für alle Wetterbedingungen gebaut. Lass dich nicht von Wettbewerbern täuschen, die behaupten, eine höhere Rückstossreduzierung als unsere Polster zu haben. Unsere Designs haben sich konsequent als überlegen gegenüber jeder anderen Marke von Rückstosspolstern erwiesen. Diese kommen nicht mehr mit Schrauben.
SPECS: NAVCOM-Synthesematerial. Schwarz mit schwarzem Basis. Gerippte Oberfläche. Schraubbare Ersatzteile erfordern keine Anpassung für Waffen mit werkseitigem Rückstosspolster. Benelli passt zu 12 Gauge, einschliesslich Holz- und Kunststoff-Schaft M1, Sport und Super Black Eagle sowie Kunststoff-Schaft Super Black Eagle II und Holz-Schaft M2 und Montefeltro. Ruger passt zu Ruger 77/22 All Weather, sowie Sako 75 und Tikka T-3 Lite Kunststoff-Schaft. Browning Gold passt ebenfalls zu Ruger 77 und #1. Mossberg 835/500 passt zu nach 1999 hergestellten Waffen.
Mehr...
Kundenbewertungen zu LIMBSAVER RUGER (RECESSED STOCK)/SAKO 75/TIKKA T-3 LITE, SYNTHETIC
Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 4
Not As Advertised(22.04.2010)
This recoil pad did not come close to fitting the Remington 700 synthetic stock that it was advertised to fit. Limbsaver customer service blamed this on Remington's use of "seven or eight different sub-contractors to produce their stocks". It would appear that odds are likely the product will not fit as advertised.
Fit 870 Police Synthetic Stock Perfectly(19.04.2012)
I bought a used 870P synthetic stock and mounted this pad. It works very well and really tames the gun. The fit was perfect. If you lightly lube the screws, they turn in much easier.
Great recoil pad - no more bruises!(28.07.2013)
Picked this up for my 870 Express, and it's fantastic. My shoulder used to get bruised up after a few 3" slugs, but after putting this on I shot a few boxes and didn't feel anything.
Trap is also easier; can shoot all day and not feel it the next morning.
Works(15.10.2011)
Fit on 338 Win Mag Tikka T-3 Lite Stainless is at least as good as the factory. This rifle weighs exactly 7 pounds with scope, sling, ready to hunt (less ammo), so recoil used to be brutal. This will never be a plinking rifle, but felt recoil is very tolerable. Using my "Virtual 33 Win" deer loads (200gr bullet, 2200 fps), it's more pleasant than a 30-30 Win 94.
Works on a Model 10 Wood Stock Also(01.11.2009)
It's listed for the Model 110, but this fit my Model 10 wood stock perfectly as well. Added a bout 1/2" versus the stock model at about the same weight. A LOT softer.
Works with a 111 Wood Stock(28.02.2016)
I bought a Savage 111 30-06 from Cabela's a couple of years ago. I believe that it was a special production that Savage did for them. I absolutely love the rifle, however it kicks like a mule. There really wasn't much for a recoil pad. I saw this on here and gave it a chance. I am glad that I did. It fits just perfect and only took a couple minutes to install.
Excellent product.(11.02.2011)
Most people use the grind to fit limbsaver recoil pads on their Benelli's. I used this one per limbsavers cross reference suggestion.
This was very easy to adapt to the Benelli M1 Tactical Pistol Grip Stock. It is SIGNIFICANTLY softer than the grind to fit models. Even 3" mag rifled slugs are a breeze to double tap on.
300 Win Mag Rem. 700 LSS(28.06.2011)
I replaced the factory Rem. pad on my 300 win mag with the LimbSaver, it fit great and was easy to put on. First time at the range I fired 18 handloads running 3185 adv-fps with 180 gn. Nos partations and the felt recoil was nill still has the push and muzzle jump but recoil is really cut to very mild. It made a really big difference and I would recommend this pad for anyone that needs to soffen the recoil of a hard shooting rifle, it worked on my 300 Win Mag, best thing I have done to that rifle. I always used a lead sled before when shooting the 300 win mag at the range, now that is not necessary, I can use the bi-pod and shoulder the rifle right, the limbsaver made it enjoyable to shoot.
Fits Marlin 444/336 wood stock(24.10.2012)
A near perfect fit believe it or not. External profile was near spot on but holes for wood screws needed a small amount of massaging to fit the 444SS pistol grip stock. A very nice recoil pad however.
Just about a perfect fit!(18.09.2013)
Bought this recoil pad for my Marlin 336 and the fit was so close to perfect I didn't have to do anything except to re-drill the screw holes to make it perfect! As always Brownell's processed and shipped my order super fast. Thanks
Not Easy To Install(04.11.2016)
Simple installation stated on the package, however installation screws's are not supplied. After a conversation with Brownell's customer service; I was informed installation hardware is not available to be ordered as there is none specified in Brownell's catalog. Brownell tech service stated I would have to find the appropriate hardware and then modify the stock holes to accept the hardware and recoil pad. Not an easy installation as advertised and one that I do not want to undertake. As far as I am concerned, the item is un-useable as advertised and shipped. I do not recommend this item.
Great product!!!!(03.10.2011)
I installed this on my Mossy 835 slug gun (24" rifled and ported bbl). I have a medical condition such that my Drs said NO center fire rifles or shotguns :(. With this pad installed felt recoil is around that of my 5.56 rifles. I could not believe the reduction in recoil from a butt pad!!! Installed easily, the holes actually lined up. Highly recommended.
Pre-Fit Means Doesn't Fit - DO NOT BUY!!(08.10.2014)
Spent $75 for two of these for my pair of Mossberg 500s. THEY DO NOT FIT AT ALL..IT IS NOT EVEN CLOSE. Pre-fit is a lie. The instructions show you where to grind off material so it will fit and it doesn't,so now you can't even return it (will try Brownells customer service tomorrow, but am not getting my hopes up). I bought these supposedly pre-fit pads because there are NO gunsmiths within a reasonable range and now am forced to rely on worn out recoil pads and bird season just getting started. I shoot trap and skeet weekly and hunt as often as possible.