Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Mehr...
Einzigartiges Design glättet die Aktion und reduziert den Abzug
Erleichtert das Ziehen am Abzug und das Spannen für schnelles und genaues Schiessen. Die offene Mitte erhält die Haltbarkeit der Werksfeder und sorgt für eine gleichmässige Federspannung.
Angaben: Federstahl. Colt / EMF passend für Colt Cowboy und Single Action Army, EMF Hartford. Uberti passt auf SAA-Klone von Uberti mit Handelsmarken. Erfordert möglicherweise eine geringfügige Anpassung.
Mehr...
Kundenbewertungen zu WOLFF COLT/EMF MAINSPRING
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory
Artikel-Nr.: 969322800 WOLFF COLT/EMF MAINSPRING Herstellerproduktnummer: 32280 Erleichtert das Ziehen am Abzug und das Spannen für schnelles und genaues Schiessen. Die offene Mitte erhält die Haltbarkeit der Werksfeder und sorgt für eine gleichmässige Federspannung.
19.9CHF18CHF 19.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Hersteller/Modell: ColtModell: Single Action Army
Hersteller/Modell:
Colt
Modell:
Single Action Army
Versandgewicht: 0.014kgVersandhöhe: 13mmVersandbreite: 69mmVersandlänge: 137mm
Artikeldetails
Made in USA
Artikel-Nr.: 969322850 WOLFF UBERTI MAINSPRING Herstellerproduktnummer: 32285 Erleichtert das Ziehen am Abzug und das Spannen für schnelles und genaues Schiessen. Die offene Mitte erhält die Haltbarkeit der Werksfeder und sorgt für eine gleichmässige Federspannung.
19.9CHF0CHF 19.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Mehr...
Einzigartiges Design glättet die Aktion und reduziert den Abzug
Erleichtert das Ziehen am Abzug und das Spannen für schnelles und genaues Schiessen. Die offene Mitte erhält die Haltbarkeit der Werksfeder und sorgt für eine gleichmässige Federspannung.
Angaben: Federstahl. Colt / EMF passend für Colt Cowboy und Single Action Army, EMF Hartford. Uberti passt auf SAA-Klone von Uberti mit Handelsmarken. Erfordert möglicherweise eine geringfügige Anpassung.
Mehr...
Kundenbewertungen zu WOLFF COLT/EMF MAINSPRING
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory