Complete set of eleven, centerless ground pins helps you refurbish or build a new 1911 from scratch. Each is heat-treated for added wear-resistance and long service life.
SPECS: Hardened steel, blued. Fits single stack 1911 auto. Set includes: hammer strut pin, link pin, mainspring plunger, sear pin, ejector pin, mainspring housing pin, mainspring plunger, mainspring plunger retainer, hammer pin, slide stop plunger, and thumb safety plunger.
Plus...
Remplace chaque goupille dans l'Auto de 1911
Ensemble complet d'onze, broches de terre centerless vous aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour ajouté-résistance à l'usure et de longue durée de vie.
Spécifications : acier trempé, bleui. FITS unique pile 1911 auto. L'ensemble comprend : marteau entretoise goupille, goupille de liaison, piston ressort moteur, saisir code pin, goupille d'éjection, goupille de logement de ressort principal, piston ressort moteur, retenue de piston ressort moteur, broche marteau, piston arrêt diapositive et plongeur sécurité pouce.
Plus...
Évaluations client de CYLINDER & SLIDE 1911 PIN SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Solid Gear(22.12.2011)
These pins have fit in every frame I've built from American Tactical, to Para Ord. The only real modification needed is the plunger tube pin. its oversized (good thing!) so make sure you fit it properly. Over all Superb quality for the price.
Looks nice...(02.10.2014)
I had planned to replace the pins in my RIA 1911, figuring any pin set bought from Brownells had to be better than those from the factory. The originals looked a bit rough and had lost most of their blueing. The C&S parts looked fantastic with a nice satin blued finish. Then I measured them with my digital micrometer. The ordinance specifications for the sear & hammer pins are 0.110"+0/-0.002" & 0.157"+0/-0.002", respectively. RIA sear pin measured 0.1074-0.1078", and the hammer pin 0.1559". So the sear pin was slightly undersized, but the circularity & cylindricity for both were surprisingly good. The C&S pins measured in spec at 0.1080-0.1096" and 0.1559-0.1571. However, the sear pin was hour-glass shaped and the hammer pin was tapered. Both circularity & cylindricity were much poorer than the factory parts. The recoil plug that I bought from them had similar issues. Philippines 1, USA 0. Hopefully the other brands sold by Brownells can make better parts. After all, this is 2014, not 1914. Manufacturing has come a long way. Making centerless ground pins with a size tolerance of 0.002mm or 0.00008" is quite common these days. I'm crossing C&S off my list.
Référence: 206000036 CYLINDER & SLIDE 1911 PIN SET Ref Fabricant: CS0014000000000147 Ensemble complet d'onze, broches de terre centerless vous aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour ajouté-résistance à l'usure et de longue durée de vie.
25.9CHF9CHF 25.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Complete set of eleven, centerless ground pins helps you refurbish or build a new 1911 from scratch. Each is heat-treated for added wear-resistance and long service life.
SPECS: Hardened steel, blued. Fits single stack 1911 auto. Set includes: hammer strut pin, link pin, mainspring plunger, sear pin, ejector pin, mainspring housing pin, mainspring plunger, mainspring plunger retainer, hammer pin, slide stop plunger, and thumb safety plunger.
Plus...
Remplace chaque goupille dans l'Auto de 1911
Ensemble complet d'onze, broches de terre centerless vous aide à rénover ou à construire un nouveau 1911 à partir de zéro. Chacun est traité thermiquement pour ajouté-résistance à l'usure et de longue durée de vie.
Spécifications : acier trempé, bleui. FITS unique pile 1911 auto. L'ensemble comprend : marteau entretoise goupille, goupille de liaison, piston ressort moteur, saisir code pin, goupille d'éjection, goupille de logement de ressort principal, piston ressort moteur, retenue de piston ressort moteur, broche marteau, piston arrêt diapositive et plongeur sécurité pouce.
Plus...
Évaluations client de CYLINDER & SLIDE 1911 PIN SET
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
Solid Gear(22.12.2011)
These pins have fit in every frame I've built from American Tactical, to Para Ord. The only real modification needed is the plunger tube pin. its oversized (good thing!) so make sure you fit it properly. Over all Superb quality for the price.
Looks nice...(02.10.2014)
I had planned to replace the pins in my RIA 1911, figuring any pin set bought from Brownells had to be better than those from the factory. The originals looked a bit rough and had lost most of their blueing. The C&S parts looked fantastic with a nice satin blued finish. Then I measured them with my digital micrometer. The ordinance specifications for the sear & hammer pins are 0.110"+0/-0.002" & 0.157"+0/-0.002", respectively. RIA sear pin measured 0.1074-0.1078", and the hammer pin 0.1559". So the sear pin was slightly undersized, but the circularity & cylindricity for both were surprisingly good. The C&S pins measured in spec at 0.1080-0.1096" and 0.1559-0.1571. However, the sear pin was hour-glass shaped and the hammer pin was tapered. Both circularity & cylindricity were much poorer than the factory parts. The recoil plug that I bought from them had similar issues. Philippines 1, USA 0. Hopefully the other brands sold by Brownells can make better parts. After all, this is 2014, not 1914. Manufacturing has come a long way. Making centerless ground pins with a size tolerance of 0.002mm or 0.00008" is quite common these days. I'm crossing C&S off my list.