M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Plus...
Museau de M1 Garand monté nettoyage tige guide friction s'adapte sur le museau pour un alignement correct de la baguette de nettoyage avec l'alésage. Chambre interne permet d'inversion d'alésage brosse ou une jag sans retirer le guide. S'adapte jusqu'à 30 tiges de calibre comme le Dewey enrobé. Fonctionne pour tous les calibres. Notre guide comprend un port de solvant pour la facilité d'utilisation. Juste glisser le guide de la tige sur votre baguette de nettoyage, puis installer votre jag ou badigeonner sur la tige avant de placer le copain de museau sur le Canon. Protéger ce bien couronné museau avec le hew museau Buddy. Le Combo de Buddy M1 contient le copain de M1 et M1 museau Buddy.
Plus...
Évaluations client de TK PRODUCTS M1 MUZZLE BUDDY
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....
Référence: 100015393 TK PRODUCTS M1 MUZZLE BUDDY Ref Fabricant: M1MZBUDDY Museau de M1 Garand monté nettoyage tige guide friction s'adapte sur le museau pour un alignement correct de la baguette de nettoyage avec l'alésage. Chambre interne permet d'inversion d'alésage brosse ou une jag sans retirer le guide. S'adapte jusqu'à 30 tiges de calibre comme le Dewey enrobé. Fonctionne pour tous les calibres. Notre guide comprend un port de solvant pour la facilité d'utilisation. Juste glisser le guide de la tige sur votre baguette de nettoyage, puis installer votre jag ou badigeonner sur la tige avant de placer le copain de museau sur le Canon. Protéger ce bien couronné museau avec le hew museau Buddy. Le Combo de Buddy M1 contient le copain de M1 et M1 museau Buddy.
31.9CHF0CHF 31.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Manufacture:
Springfield
Modèle:
M1
Poids du colis: 0.091kgHauteur d'expédition: 25mmLargeur d'expédition: 107mmLongueur d'expédition: 171mm
Détails de l'article
Fabriqué au USA
Référence: 100007592 TK PRODUCTS M1 BUDDY Ref Fabricant: M1BUDDY Museau de M1 Garand monté nettoyage tige guide friction s'adapte sur le museau pour un alignement correct de la baguette de nettoyage avec l'alésage. Chambre interne permet d'inversion d'alésage brosse ou une jag sans retirer le guide. S'adapte jusqu'à 30 tiges de calibre comme le Dewey enrobé. Fonctionne pour tous les calibres. Notre guide comprend un port de solvant pour la facilité d'utilisation. Juste glisser le guide de la tige sur votre baguette de nettoyage, puis installer votre jag ou badigeonner sur la tige avant de placer le copain de museau sur le Canon. Protéger ce bien couronné museau avec le hew museau Buddy. Le Combo de Buddy M1 contient le copain de M1 et M1 museau Buddy.
29.9CHF0CHF 29.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Référence: 100015394 TK PRODUCTS M1 BUDDY COMBO Ref Fabricant: M1 COMBO Museau de M1 Garand monté nettoyage tige guide friction s'adapte sur le museau pour un alignement correct de la baguette de nettoyage avec l'alésage. Chambre interne permet d'inversion d'alésage brosse ou une jag sans retirer le guide. S'adapte jusqu'à 30 tiges de calibre comme le Dewey enrobé. Fonctionne pour tous les calibres. Notre guide comprend un port de solvant pour la facilité d'utilisation. Juste glisser le guide de la tige sur votre baguette de nettoyage, puis installer votre jag ou badigeonner sur la tige avant de placer le copain de museau sur le Canon. Protéger ce bien couronné museau avec le hew museau Buddy. Le Combo de Buddy M1 contient le copain de M1 et M1 museau Buddy.
49.9CHF0CHF 49.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
M1 Garand muzzle mounted cleaning rod guide friction fits on the muzzle for correct alignment of the cleaning rod with the bore. Internal chamber allows for reversal of bore brush or jag without removing the guide. Fits up to 30 caliber rods such as the Dewey coated rods. Works for all calibers. Our guide includes a solvent port for ease of use.Just slip the rod guide over your cleaning rod, then install your jag or brush on the rod prior to placing the Muzzle Buddy on the barrel. Protect that properly crowned muzzle with the hew Muzzle Buddy. The M1 Buddy Combo contains the M1 Buddy and M1 Muzzle Buddy.
Plus...
Museau de M1 Garand monté nettoyage tige guide friction s'adapte sur le museau pour un alignement correct de la baguette de nettoyage avec l'alésage. Chambre interne permet d'inversion d'alésage brosse ou une jag sans retirer le guide. S'adapte jusqu'à 30 tiges de calibre comme le Dewey enrobé. Fonctionne pour tous les calibres. Notre guide comprend un port de solvant pour la facilité d'utilisation. Juste glisser le guide de la tige sur votre baguette de nettoyage, puis installer votre jag ou badigeonner sur la tige avant de placer le copain de museau sur le Canon. Protéger ce bien couronné museau avec le hew museau Buddy. Le Combo de Buddy M1 contient le copain de M1 et M1 museau Buddy.
Plus...
Évaluations client de TK PRODUCTS M1 MUZZLE BUDDY
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 3.4
Avoid....Doesn't Fit M1 Garand as stated(04.09.2018)
Doesn't fit on the end of the muzzle AND a standard .30 cal jag/patch won't fit through the inner diameter of the guide. Receiver end piece won't stay in place with the bolt closed. AVOID, and buy the Sinclair muzzle guide/bore guide instead.
It works, well kind of works.(29.05.2012)
This product is supposed to snap in, it does not. It loosely sits in place as long as you do not tip the rifle. It is molded to the shape of the action but has at least 1/16" between its edges and the action's surfaces. If you want this to work the best bet I can think of would be to apply grease or wax to the receiver and then use RTV sealant on the M1 Buddy to make the fit what it should be.
Does What It's Supposed To Do!(22.12.2012)
I used this in both my M1-A's and M1 Garand and in both types of weapons it worked just fine. With the Garand you have to push down on the device while pushing forward on the op rod. With the M1A you just lock the bolt back, set the device in the receiver opening, and gently let the bolt go forward.
This thing is GREAT!(09.08.2013)
I have used it in my Garands and my M1A. The bolt holds it in place.
Worthless if you have a scope mount!(23.08.2013)
It appears to be a great idea....IF one does NOT have a scope mounted. This will NOT fit under my SEI mount.I have tried everything short of forcing it in. Oh Well...Back to a rag jammed in the mag well.
M 1 Buddy Thumbs up(08.10.2014)
No cons on this. I need a quick wipe down the barrel so I bought this Buddy and it works keep it in your box....