M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant material, these covers offer an enhanced gripping surface. At 9.5” in length they cover six full M-LOK slots but can be cut to be customized for length or combination of colors. Includes two panels.
Plus...
M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
Plus...
Évaluations client de MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER FLAT DARK EARTH 9.5"
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 4
Simple Solutions(11.04.2016)
This simple accessory slips straight into the MLOK mounting slots and covers them with a soft-rubber strip that enhances comfort and purchase without greatly affecting handling. Once your fingers (or the side of your hand with a vertical grip) start sinking into the rubber a bit, it really does seem to improve their stability, and it certainly adds to comfort level. Best of all, scoring marks (alternated between the top and the bottom) are included between each insertion nub, allowing you to trim out the exact length needed to cover your unused slot(s), all the way down to a solitary square for a half-slot. If you want greater comfort, flexibility, value, and continuity of handling than the Type 2 covers, this is for you. There are only two downsides, the smaller being that the ends occasionally threaten to pull out a little if a finger or gear happens to snag them, but this hasn't proved to be an actual issue so far. More significantly, the unused slots normally function as secondary ventilation when firing, so I suggest installing the covers only where your hands spend the most time. Otherwise, these are great.
Référence: 100017432 MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER FLAT DARK EARTH 9.5" Ref Fabricant: MAG602-FDE873750006079 M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
26.9CHF159CHF 26.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques:Couleur: Flat Dark EarthLongueur: 9.5Manufacture: AR-15Matériaux: RubberStyle: M-LOK
Référence: 100017431 MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER BLACK 9.5" Ref Fabricant: MAG602-BLK873750006062 M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
26.9CHF327CHF 26.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100017433 MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER GRAY 9.5" Ref Fabricant: MAG602-GRY873750006086 M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
26.9CHF129CHF 26.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100017434 MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER O.D. GREEN 9.5" Ref Fabricant: MAG602-ODG873750006093 M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
26.9CHF200CHF 26.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant material, these covers offer an enhanced gripping surface. At 9.5” in length they cover six full M-LOK slots but can be cut to be customized for length or combination of colors. Includes two panels.
Plus...
M-LOK Type 1 ferroviaire couvre sont ultra-plat et léger couvre qui s'installent directement sur les systèmes compatibles M-LOK. Faite d'un matériau extrêmement résistant à la chaleur, ces panneaux offre une surface de préhension améliorée. À 9,5" de longueur, ils couvrent six emplacements de M-LOK complets mais peuvent être coupées pour être adaptée à la longueur ou la combinaison de couleurs. Comprend deux panneaux.
Plus...
Évaluations client de MAGPUL RAIL COVER TYPE 1 M-LOK RUBBER FLAT DARK EARTH 9.5"
Nombre d'évaluations: 1
De brownells.com: 1
Note moyenne: 4
Simple Solutions(11.04.2016)
This simple accessory slips straight into the MLOK mounting slots and covers them with a soft-rubber strip that enhances comfort and purchase without greatly affecting handling. Once your fingers (or the side of your hand with a vertical grip) start sinking into the rubber a bit, it really does seem to improve their stability, and it certainly adds to comfort level. Best of all, scoring marks (alternated between the top and the bottom) are included between each insertion nub, allowing you to trim out the exact length needed to cover your unused slot(s), all the way down to a solitary square for a half-slot. If you want greater comfort, flexibility, value, and continuity of handling than the Type 2 covers, this is for you. There are only two downsides, the smaller being that the ends occasionally threaten to pull out a little if a finger or gear happens to snag them, but this hasn't proved to be an actual issue so far. More significantly, the unused slots normally function as secondary ventilation when firing, so I suggest installing the covers only where your hands spend the most time. Otherwise, these are great.