Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for Faxon Firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all Faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon Firearms highly recommends the use of Loc-Tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm.
Plus...
Parfait pour n’importe quel système de rail, ces blocs de gaz ultra bas profil sont les canons de compagnon idéal pour les armes à feu Faxon (ou autre) avec un journal de gaz diamètre standard. En acier haute résistance, tous les blocs de gaz Faxon sont un lustre noir correspondant à leurs barils. Pour les versions légères, le bloc est percé au milieu du profil. Les pinces de bloc de gaz sur le canon à l’aide de 3 clés allen sur le bas du bloc. Faxon feu recommande fortement l’utilisation de Loc-Tite ou blocage des composés similaires. Blocs de gaz va devenir très chauds, alors choisissez un composé selon votre usage de l’arme à feu.
Plus...
Évaluations client de FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .750
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
3 builds and no cycling failures(03.11.2017)
I built my first rifle with an unknown name brand gas block. It had cycling issues and it did not feed on 10th or 20th round fired. So I decided to replace it with this gas block, Brownell's nitride gas tube and viola! I've had no issues since. I built 300 BO and 308 ARs using same gas block, no problems.
LT 308 Block(07.08.2018)
In my desire to piece together a light 308, I chose this Faxon GB and put it on a Faxon 18" rilfe length Pencil Bbl. I really wanted an adjustable block, but now that I have shot it, I'm convinced this was the right choice for the goals of this build. I have been running some hot surplus ball down the barrel, and the block is staying put (no set screw dimpling was performed, just LocTite and torque). Fits , with plenty of headroom, under a Midwest Ind. SS MLock float handguard. Oh, and the roll pin for the gas tube is staying put too.
Référence: 100022859 FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .750 Ref Fabricant: GBLP7503816341020986 Parfait pour n’importe quel système de rail, ces blocs de gaz ultra bas profil sont les canons de compagnon idéal pour les armes à feu Faxon (ou autre) avec un journal de gaz diamètre standard. En acier haute résistance, tous les blocs de gaz Faxon sont un lustre noir correspondant à leurs barils. Pour les versions légères, le bloc est percé au milieu du profil. Les pinces de bloc de gaz sur le canon à l’aide de 3 clés allen sur le bas du bloc. Faxon feu recommande fortement l’utilisation de Loc-Tite ou blocage des composés similaires. Blocs de gaz va devenir très chauds, alors choisissez un composé selon votre usage de l’arme à feu.
49.9CHF75CHF 49.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Référence: 100022860 FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .625 Ref Fabricant: GBLP6253816341021006 Parfait pour n’importe quel système de rail, ces blocs de gaz ultra bas profil sont les canons de compagnon idéal pour les armes à feu Faxon (ou autre) avec un journal de gaz diamètre standard. En acier haute résistance, tous les blocs de gaz Faxon sont un lustre noir correspondant à leurs barils. Pour les versions légères, le bloc est percé au milieu du profil. Les pinces de bloc de gaz sur le canon à l’aide de 3 clés allen sur le bas du bloc. Faxon feu recommande fortement l’utilisation de Loc-Tite ou blocage des composés similaires. Blocs de gaz va devenir très chauds, alors choisissez un composé selon votre usage de l’arme à feu.
59.9CHF121CHF 59.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for Faxon Firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all Faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon Firearms highly recommends the use of Loc-Tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm.
Plus...
Parfait pour n’importe quel système de rail, ces blocs de gaz ultra bas profil sont les canons de compagnon idéal pour les armes à feu Faxon (ou autre) avec un journal de gaz diamètre standard. En acier haute résistance, tous les blocs de gaz Faxon sont un lustre noir correspondant à leurs barils. Pour les versions légères, le bloc est percé au milieu du profil. Les pinces de bloc de gaz sur le canon à l’aide de 3 clés allen sur le bas du bloc. Faxon feu recommande fortement l’utilisation de Loc-Tite ou blocage des composés similaires. Blocs de gaz va devenir très chauds, alors choisissez un composé selon votre usage de l’arme à feu.
Plus...
Évaluations client de FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .750
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 5
3 builds and no cycling failures(03.11.2017)
I built my first rifle with an unknown name brand gas block. It had cycling issues and it did not feed on 10th or 20th round fired. So I decided to replace it with this gas block, Brownell's nitride gas tube and viola! I've had no issues since. I built 300 BO and 308 ARs using same gas block, no problems.
LT 308 Block(07.08.2018)
In my desire to piece together a light 308, I chose this Faxon GB and put it on a Faxon 18" rilfe length Pencil Bbl. I really wanted an adjustable block, but now that I have shot it, I'm convinced this was the right choice for the goals of this build. I have been running some hot surplus ball down the barrel, and the block is staying put (no set screw dimpling was performed, just LocTite and torque). Fits , with plenty of headroom, under a Midwest Ind. SS MLock float handguard. Oh, and the roll pin for the gas tube is staying put too.