Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Ammorbidisce il feltro rinculo impedisce ecchimosi guancia
Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
Punteggi dei clienti per KICK-EEZ CHEEK-EEZ 1/4" THICK BLACK
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.
N. prodotto: 440703140 KICK-EEZ CHEEK-EEZ 1/4" THICK BLACK Parti Fabbricante: 703140730412000564 Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
27.9CHF11CHF 27.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Universal Rifles
Colore:
Black
Finitura:
Nero
Materiale:
Rubber
Peso della spedizione: 0.068kgAltezza di spedizione: 8mmLarghezza di spedizione: 145mmLunghezza di spedizione: 229mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 440703116 KICK-EEZ CHEEK-EEZ 1/16" THICK BLACK Parti Fabbricante: 703116703412000544 Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
18.9CHF0CHF 18.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 440703180 KICK-EEZ CHEEK-EEZ 1/8" THICK BLACK Parti Fabbricante: 703-180730412000557 Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
27.9CHF0CHF 27.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
N. prodotto: 440703316 KICK-EEZ CHEEK-EEZ 3/16" THICK BLACK Parti Fabbricante: 703316730412000526 Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
25.9CHF0CHF 25.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Ammorbidisce il feltro rinculo impedisce ecchimosi guancia
Buccia e bastone per qualsiasi nasello e mettere fine alla sensazione beat up e dolente il giorno dopo la sparatoria. Genuino, Sorbothane ®, rinculo assorbendo la gomma è pre-tagliate con un retro adesivo per adattarsi rapidamente su duro-calci di fucili o fucili. Tre spessori consentono veloce pettine regolazioni in altezza.
Punteggi dei clienti per KICK-EEZ CHEEK-EEZ 1/4" THICK BLACK
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.