Cushioned handle has 22 ball bearings inside for effortless rotation so the patch always follows the rifling. Full-length epoxy coating on spring steel rod is impervious to solvents. Index dots on the handle let you check twist rates. 6mm BR rod gives an exact fit to 6mm benchrest, varmint, and hunting rifles.
Asta completamente rivestito pulisce senza graffiare
Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
Specifiche: 8-32 filetti femmina..17 Cal &.20 canne Cal hanno filettature femmine 5-40. Le maniglie sono 11 ⁄ 8"(2,9 cm) di diametro, 5" (12.7 cm) lungo.
Altro...
Punteggi dei clienti per BORE TECH .22 CAL. 36"
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.7
Epoxy Coating Comes Off In Use(11.08.2009)
I bought this .22 caliber rod and used it very briefly and liked it so much I bought 4 more in calibers ranging from .17-7mm. After about a year of use in benchrest shooting and only with a high quality bore guide to help in keeping the rod in alignment with the bore; the expoxy coating started coming off everywhere on the rod. In other words the coating didn't come off due to scratching or scraping but just started delaminating itself from the steel. I first noticed it when I brushed the barrel and the black epoxy stuck to the brush. I use Butch's Bore Shine and Copper Killer products exclusively and don't know if this is why, but these rods have since all been sent back to Brownells even though 2 or 3 of them have not yet seen any real use. The .20 caliber rod had started to do the same thing near the tip. I thought these would be great but don't want any pieces of epoxy in my barrels as that can't be good.
GREAT ROD(23.12.2009)
Rod works very well. I own several in various calibers. I do know that Bore Tech has recently changed their coating to an extremely scratch and chemical resistant coating. I have used Butches on this new coating without a problem. Stopped using Butches as soon as I tried Bore Tech Eliminator. Talk about an impressive chemical that doesn't stink!!!!
Great cleaning rod!(24.03.2011)
I've been using this rod for a while on my AR's and it has held up well. No issues with the coating. The bearings in the handle spin like nothing I've uesd before!
N. prodotto: 509000007 BORE TECH .22 CAL. 36" Parti Fabbricante: BSTX-2236-00667739922364 Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
144.9CHF31CHF 144.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Calibro:
22 Calibro (.223-.224)
Lunghezza:
36
Materiale:
Epoxy Coated
Tipo:
Rifle
Peso della spedizione: 0.322kgAltezza di spedizione: 25mmLarghezza di spedizione: 25mmLunghezza di spedizione: 1'067mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 509000008 BORE TECH .22 CAL. 44" Parti Fabbricante: BSTX-2244-00667739922449 Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
144.9CHF16CHF 144.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 509000009 BORE TECH 6MM BR 44" Parti Fabbricante: BSTX-6644-00667739966443 Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
144.9CHF8CHF 144.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Calibro: 243/6 mm (.243)Lunghezza: 44Materiale: Epoxy CoatedTipo: Rifle
N. prodotto: 509000010 BORE TECH 7MM-30 CAL. 36" Parti Fabbricante: BSTX-7336-00667739973366 Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
144.9CHF30CHF 144.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 509000011 BORE TECH 7MM-30 CAL. 44" Parti Fabbricante: BSTX-7344-00667739973441 Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
144.9CHF1CHF 144.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Cushioned handle has 22 ball bearings inside for effortless rotation so the patch always follows the rifling. Full-length epoxy coating on spring steel rod is impervious to solvents. Index dots on the handle let you check twist rates. 6mm BR rod gives an exact fit to 6mm benchrest, varmint, and hunting rifles.
Asta completamente rivestito pulisce senza graffiare
Impugnatura ammortizzata ha 22 cuscinetti a sfera all'interno per rotazione senza sforzo, così la patch segue sempre la rigatura. Rivestimento epossidico full-length sull'asta di acciaio della molla è inattaccabile ai solventi. Punti di indice sul manico consentono di controllare i tassi di torsione. asta 6mm BR dà una misura esatta di 6mm benchrest, varmint e fucili da caccia.
Specifiche: 8-32 filetti femmina..17 Cal &.20 canne Cal hanno filettature femmine 5-40. Le maniglie sono 11 ⁄ 8"(2,9 cm) di diametro, 5" (12.7 cm) lungo.
Altro...
Punteggi dei clienti per BORE TECH .22 CAL. 36"
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 3.7
Epoxy Coating Comes Off In Use(11.08.2009)
I bought this .22 caliber rod and used it very briefly and liked it so much I bought 4 more in calibers ranging from .17-7mm. After about a year of use in benchrest shooting and only with a high quality bore guide to help in keeping the rod in alignment with the bore; the expoxy coating started coming off everywhere on the rod. In other words the coating didn't come off due to scratching or scraping but just started delaminating itself from the steel. I first noticed it when I brushed the barrel and the black epoxy stuck to the brush. I use Butch's Bore Shine and Copper Killer products exclusively and don't know if this is why, but these rods have since all been sent back to Brownells even though 2 or 3 of them have not yet seen any real use. The .20 caliber rod had started to do the same thing near the tip. I thought these would be great but don't want any pieces of epoxy in my barrels as that can't be good.
GREAT ROD(23.12.2009)
Rod works very well. I own several in various calibers. I do know that Bore Tech has recently changed their coating to an extremely scratch and chemical resistant coating. I have used Butches on this new coating without a problem. Stopped using Butches as soon as I tried Bore Tech Eliminator. Talk about an impressive chemical that doesn't stink!!!!
Great cleaning rod!(24.03.2011)
I've been using this rod for a while on my AR's and it has held up well. No issues with the coating. The bearings in the handle spin like nothing I've uesd before!