We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we’ve added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break.
SPECS: Cryo-treated, high-speed steel.
Altro...
Più lunga durata di taglio; Riduce i costi di sostituzione
Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
Specifiche: acciaio ad alta velocità, Cryo-trattati.
Altro...
Punteggi dei clienti per BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .330"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Great Cutter, great price(23.09.2012)
Worked excellent to machine the "novak" cut on my 1911 with trijicon HD sights. The .005" undersize from the typical .495" cutters gave more 'meat' to dress with a file to fit the sight in tight. As for durability, we'll see, but cryo vs hSS $ wise is close, so why not get the cryo?
One time use but does a great job(23.12.2012)
I bought this knowing it was most likely going to be one time use. Used it at 400RPM with slow passes and a ton of cutting oil to mill a slot into my M&P for a slideracker. Worked great, but the cutters are now completely dull. It's a throwaway, but a 3rd of the price of a carbide. Also, you want to mill out the center of the dovetail with a carbide endmill first so this is only doing the angled portions.
Pleasantly Surprized(05.03.2010)
The slide I was working on was really quite hard, and I had some reservations about using anything but carbide to cut the rear dovetail. However, after my previous experience with Brownells' satisfaction guarantee, I decided to try the Cryo-Treated cutter.
It cut that hard slide like butter!
works excellent(27.12.2014)
Cut a Caspian commander slide for a Novak style sight. Ran it at 650 RPM and 1 IPM just to be safe and it cut easily. First came in with a 1/4" end mill and made a .260 wide by .075 deep slot then used this cutter .075 deep. Worked like a charm, job finished in less than half an hour taking my time.
N. prodotto: 080000276 BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .330" Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
39.9CHF1CHF 39.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Gradi:
60
Peso della spedizione: 0.045kgLarghezza di spedizione: 83mmLunghezza di spedizione: 146mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 080000273 BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .290" Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
47.9CHF2CHF 47.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 080000274 BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .300" Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
48.9CHF2CHF 48.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
N. prodotto: 080000277 BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .359" Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
49.9CHF8CHF 49.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we’ve added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break.
SPECS: Cryo-treated, high-speed steel.
Altro...
Più lunga durata di taglio; Riduce i costi di sostituzione
Abbiamo preso il nostro più popolare frese a coda di rondine e trattata criogenicamente li per darvi uno strumento che sarà tagliato il materiale più duro e ultima più, risparmiando tempo e aumentando la produzione. I nostri strumenti di cryo-trattati sono stati profondo-trattati-320 ° f a cambiare la struttura molecolare della lega metallica, che li rende più densa e le sollecitazioni che portano alla fatica di strumento di rimozione. Strumenti di Cryo-trattati non apparire diversi strumenti non trattati, così abbiamo aggiunto due anelli vicino alla fine del lavoro per differenziarli dai nostri tagliatori regolari. Non superare i 700 RPM o frese si romperanno.
Specifiche: acciaio ad alta velocità, Cryo-trattati.
Altro...
Punteggi dei clienti per BROWNELLS CRYO-TREATED DOVETAIL CUTTER 60 X .330"
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.8
Great Cutter, great price(23.09.2012)
Worked excellent to machine the "novak" cut on my 1911 with trijicon HD sights. The .005" undersize from the typical .495" cutters gave more 'meat' to dress with a file to fit the sight in tight. As for durability, we'll see, but cryo vs hSS $ wise is close, so why not get the cryo?
One time use but does a great job(23.12.2012)
I bought this knowing it was most likely going to be one time use. Used it at 400RPM with slow passes and a ton of cutting oil to mill a slot into my M&P for a slideracker. Worked great, but the cutters are now completely dull. It's a throwaway, but a 3rd of the price of a carbide. Also, you want to mill out the center of the dovetail with a carbide endmill first so this is only doing the angled portions.
Pleasantly Surprized(05.03.2010)
The slide I was working on was really quite hard, and I had some reservations about using anything but carbide to cut the rear dovetail. However, after my previous experience with Brownells' satisfaction guarantee, I decided to try the Cryo-Treated cutter.
It cut that hard slide like butter!
works excellent(27.12.2014)
Cut a Caspian commander slide for a Novak style sight. Ran it at 650 RPM and 1 IPM just to be safe and it cut easily. First came in with a 1/4" end mill and made a .260 wide by .075 deep slot then used this cutter .075 deep. Worked like a charm, job finished in less than half an hour taking my time.