Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Side-by-side configuration with staggered heights, plus fixed standoff points between the compartments further ensure the magazines won’t shift position or rattle. Includes a Top Round Protector (TRP) to protect the feed lips of the backup mag, prevent accidental dislodgement of the top round, and keep out dirt. TRP instantly detaches by applying downward thumb pressure on the release tab while pushing forward. Rubber retention strap keeps TRP from getting lost.
Mantiene un ricambio Mag pronto per una ricarica immediata
Duro, stampato in nylon rivista accoppiatore si associa una rivista backup direttamente il mag nella pistola per fulmine veloce ricarica tattica senza spostare la mano del grilletto. Tre, bulloni in acciaio consentono di regolare la forza di ritenzione, così le riviste non scivolare fuori anche durante le manovre di combattimento vigorose. Configurazione side-by-side con altezze sfalsate, più punti fissi distanziatori tra i compartimenti ulteriormente garantire le riviste non spostare di posizione o sonaglio. Include un protettore Top Round (TRP) per proteggere le labbra mangimi della mag backup, impedire il distacco accidentale del round top e tenere fuori lo sporco. TRP si stacca istantaneamente applicando pressione del pollice verso il basso nella scheda rilascio mentre si spinge in avanti. Cinturino di ritenzione in mantiene TRP da perdersi.
Specifiche: stampato in nylon, nero, con tensione in acciaio regolazione bulloni. 2¾ (cm 7) lunga, 2-7 ⁄ 16"(6,2 cm) largamente, 3¼" (8,3 cm) alto.
Altro...
Punteggi dei clienti per BROWNELLS AR-15/M16 MAGAZINE COUPLER
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3.9
Great product for the money(09.11.2009)
Works well, holds mags tightly together, and having a flip off top cover for the auxillary mag is a nice feature.
Not for 20 round magazines(09.01.2010)
Was purchased for departmental 20 round magazines and will not work reliably for them. Did not try with 30 round magazines, we do not use them.
Nice(10.04.2010)
Works nicely with my H&K high quality 30 rds mags, only disanvantage is you should check regularly the tightening screws -> comes loose from time to time.
Also "auto-fits" the mags in correct height regarding each other -> you don't have to check if the other (right side) mag blocks out the ejecting port of your gun; this is automatically adjusted which is a nice feature.
Great Product(16.04.2010)
Works exactly as intended. Holds two mags firmly in place. Offsets them perfectly to not block ejection port. Mags do not move over time and get out of alignment since the coupler is molded to hold them in proper alignment and does not rely on screw pressure alone.
The smooth rounded bottom is also a blessing when doing numerous mag changes and smacking the bottom of the mags to ensure a positive seat. Smack the bottom of square sharp metal mags for a few days straight and you'll welcome the smooth bottom of this coupler.
I highly recommend these things to everyone I talk to.
WILL NOT FIT PMAGS(05.07.2011)
This will not fit pmags. Brownells really should put this info on the product page in all CAPS!
great product(18.07.2011)
great product. I've tried a lot of different couplers and this is by far my favorite. Quality materials, easy set up, holds mags tight, really like the design of the top cover. The guy who gave it a low score should actually look at the product photo, obvious it's not made for p mags.
Great Product For Military 30 Round Mags(28.09.2011)
Bought several for on duty and off duty use for my AR15's. Put a thousand rounds through with no issues.
The Best Mag Coupler I Have Used(12.11.2011)
I have used quite a bit of devices that clamp or otherwise hold 2 mags together. This is probably the best one. YES it works and NO it doesn't work on PMAGS. Rock solid hold and very tough! Well worth the price.
Great Coupler but not for DPMS AR .308(24.08.2017)
I actually ordered this product for a custom AR .308 which uses DPMS style metal magazines which I found this coupler was much too small for, however; I did find it fit my Beretta ARX-160 .22 magazines perfectly so I now use it for that purpose instead. The coupler is a little difficult to adjust because of it's use of long screws which require a screwdriver and some finesse which is not something I want to be doing in the middle of combat. Good thing is though once it's on, it's on and doesn't need adjusting unless your magazine completely fails and you need to swap the magazine out of the coupler.
N. prodotto: 080000511 BROWNELLS AR-15/M16 MAGAZINE COUPLER Parti Fabbricante: 66413 Duro, stampato in nylon rivista accoppiatore si associa una rivista backup direttamente il mag nella pistola per fulmine veloce ricarica tattica senza spostare la mano del grilletto. Tre, bulloni in acciaio consentono di regolare la forza di ritenzione, così le riviste non scivolare fuori anche durante le manovre di combattimento vigorose. Configurazione side-by-side con altezze sfalsate, più punti fissi distanziatori tra i compartimenti ulteriormente garantire le riviste non spostare di posizione o sonaglio. Include un protettore Top Round (TRP) per proteggere le labbra mangimi della mag backup, impedire il distacco accidentale del round top e tenere fuori lo sporco. TRP si stacca istantaneamente applicando pressione del pollice verso il basso nella scheda rilascio mentre si spinge in avanti. Cinturino di ritenzione in mantiene TRP da perdersi.
26.9CHF0CHF 26.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Adatto per:
AR-15
Colore:
Black
Peso della spedizione: 0.113kgAltezza di spedizione: 61mmLarghezza di spedizione: 81mmLunghezza di spedizione: 109mm
Dettagli dell'elemento
Made in Usa
Classificazione per l'export dagli US: 0A501.x
Questi articoli sono controllati dal governo degli Stati Uniti e ne è autorizzata l'esportazione solo nel paese di destinazione finale e l'uso solo da parte del destinatario finale o degli utenti finali qui identificati. Questi beni non possono essere rivenduti, trasferiti o altrimenti ceduti a nessun altro paese o a persone diverse dal destinatario finale o dall'utente finale autorizzati, nella loro forma originale o dopo essere stati incorporati in altri articoli, senza prima ottenere l'approvazione dal governo degli Stati Uniti o come altrimenti autorizzato dalla legge e dai regolamenti degli Stati Uniti.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Side-by-side configuration with staggered heights, plus fixed standoff points between the compartments further ensure the magazines won’t shift position or rattle. Includes a Top Round Protector (TRP) to protect the feed lips of the backup mag, prevent accidental dislodgement of the top round, and keep out dirt. TRP instantly detaches by applying downward thumb pressure on the release tab while pushing forward. Rubber retention strap keeps TRP from getting lost.
Mantiene un ricambio Mag pronto per una ricarica immediata
Duro, stampato in nylon rivista accoppiatore si associa una rivista backup direttamente il mag nella pistola per fulmine veloce ricarica tattica senza spostare la mano del grilletto. Tre, bulloni in acciaio consentono di regolare la forza di ritenzione, così le riviste non scivolare fuori anche durante le manovre di combattimento vigorose. Configurazione side-by-side con altezze sfalsate, più punti fissi distanziatori tra i compartimenti ulteriormente garantire le riviste non spostare di posizione o sonaglio. Include un protettore Top Round (TRP) per proteggere le labbra mangimi della mag backup, impedire il distacco accidentale del round top e tenere fuori lo sporco. TRP si stacca istantaneamente applicando pressione del pollice verso il basso nella scheda rilascio mentre si spinge in avanti. Cinturino di ritenzione in mantiene TRP da perdersi.
Specifiche: stampato in nylon, nero, con tensione in acciaio regolazione bulloni. 2¾ (cm 7) lunga, 2-7 ⁄ 16"(6,2 cm) largamente, 3¼" (8,3 cm) alto.
Altro...
Punteggi dei clienti per BROWNELLS AR-15/M16 MAGAZINE COUPLER
Numero di punteggi: 9
Da brownells.com: 9
Punteggio medio: 3.9
Great product for the money(09.11.2009)
Works well, holds mags tightly together, and having a flip off top cover for the auxillary mag is a nice feature.
Not for 20 round magazines(09.01.2010)
Was purchased for departmental 20 round magazines and will not work reliably for them. Did not try with 30 round magazines, we do not use them.
Nice(10.04.2010)
Works nicely with my H&K high quality 30 rds mags, only disanvantage is you should check regularly the tightening screws -> comes loose from time to time.
Also "auto-fits" the mags in correct height regarding each other -> you don't have to check if the other (right side) mag blocks out the ejecting port of your gun; this is automatically adjusted which is a nice feature.
Great Product(16.04.2010)
Works exactly as intended. Holds two mags firmly in place. Offsets them perfectly to not block ejection port. Mags do not move over time and get out of alignment since the coupler is molded to hold them in proper alignment and does not rely on screw pressure alone.
The smooth rounded bottom is also a blessing when doing numerous mag changes and smacking the bottom of the mags to ensure a positive seat. Smack the bottom of square sharp metal mags for a few days straight and you'll welcome the smooth bottom of this coupler.
I highly recommend these things to everyone I talk to.
WILL NOT FIT PMAGS(05.07.2011)
This will not fit pmags. Brownells really should put this info on the product page in all CAPS!
great product(18.07.2011)
great product. I've tried a lot of different couplers and this is by far my favorite. Quality materials, easy set up, holds mags tight, really like the design of the top cover. The guy who gave it a low score should actually look at the product photo, obvious it's not made for p mags.
Great Product For Military 30 Round Mags(28.09.2011)
Bought several for on duty and off duty use for my AR15's. Put a thousand rounds through with no issues.
The Best Mag Coupler I Have Used(12.11.2011)
I have used quite a bit of devices that clamp or otherwise hold 2 mags together. This is probably the best one. YES it works and NO it doesn't work on PMAGS. Rock solid hold and very tough! Well worth the price.
Great Coupler but not for DPMS AR .308(24.08.2017)
I actually ordered this product for a custom AR .308 which uses DPMS style metal magazines which I found this coupler was much too small for, however; I did find it fit my Beretta ARX-160 .22 magazines perfectly so I now use it for that purpose instead. The coupler is a little difficult to adjust because of it's use of long screws which require a screwdriver and some finesse which is not something I want to be doing in the middle of combat. Good thing is though once it's on, it's on and doesn't need adjusting unless your magazine completely fails and you need to swap the magazine out of the coupler.