Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Altro...
Oversize, con superficie scanalata per la ricarica veloce & Jam Clearance
Facile da installare, sovradimensionato ricarica maniglia ti aiuta a cancellare inceppamento ed espellere un camerati tondo rapidamente ed efficientemente. Costruzione in acciaio lavorati, con una caratteristica forma tubolare e profondo, flauti corkscrewpattern dare un ottimo acquisto e un look elegante. Nessun gunsmithing necessaria.
Specifiche: acciaio finitura nera opaca. Benelli/Beretta si inserisce Benelli M1/M2 (CAL. 12/20) e Beretta Extrema. Sughereto si inserisce calibro 12 Remington 1100 e 11-87. Win. / FN si inserisce argento Browning Winchester SX2/SX3 e SLP FN.
Altro...
Punteggi dei clienti per NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.4
Awesome(17.05.2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23.09.2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12.01.2013)
Way better than expected!!!!
Thoroughly impressive(15.01.2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03.04.2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.
N. prodotto: 100005452 NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA Parti Fabbricante: BOHBN816696021249 Facile da installare, sovradimensionato ricarica maniglia ti aiuta a cancellare inceppamento ed espellere un camerati tondo rapidamente ed efficientemente. Costruzione in acciaio lavorati, con una caratteristica forma tubolare e profondo, flauti corkscrewpattern dare un ottimo acquisto e un look elegante. Nessun gunsmithing necessaria.
69.9CHF5CHF 69.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
Beretta,Benelli
Finitura:
Nero
Modello:
M1,M2,AL391 Xtrema
Peso della spedizione: 0.045kgLarghezza di spedizione: 57mmLunghezza di spedizione: 89mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100005454 NORDIC COMPONENTS SPEED BOLT HANDLE, WINCHESTER/FN Parti Fabbricante: BOH-SX816696021270 Facile da installare, sovradimensionato ricarica maniglia ti aiuta a cancellare inceppamento ed espellere un camerati tondo rapidamente ed efficientemente. Costruzione in acciaio lavorati, con una caratteristica forma tubolare e profondo, flauti corkscrewpattern dare un ottimo acquisto e un look elegante. Nessun gunsmithing necessaria.
74.9CHF5CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Winchester, FNFinitura: NeroModello: Super X-2, SLP, SX2, SX3, SLP Mark I
N. prodotto: 100005453 NORDIC COMPONENTS SPEED BOLT HANDLE, REMINGTON Parti Fabbricante: BOHRM816696021263 Facile da installare, sovradimensionato ricarica maniglia ti aiuta a cancellare inceppamento ed espellere un camerati tondo rapidamente ed efficientemente. Costruzione in acciaio lavorati, con una caratteristica forma tubolare e profondo, flauti corkscrewpattern dare un ottimo acquisto e un look elegante. Nessun gunsmithing necessaria.
Oversized, With Fluted Surface For Fast Charging & Jam Clearance
Easy to install, oversized charging handle helps you clear misfeeds and eject a chambered round quickly and efficiently. Machined steel construction, with a distinctive tubular shape, and deep, corkscrewpattern flutes give an excellent purchase and stylish look. No gunsmithing required.
SPECS: Steel, matte black finish. Benelli/Beretta fits Benelli M1/M2 (12/20 gauge) and Beretta Extrema. Rem. fits Remington 12 gauge 1100 and 11-87. Win./FN fits Winchester SX2/SX3, FN SLP, and Browning Silver.
Altro...
Oversize, con superficie scanalata per la ricarica veloce & Jam Clearance
Facile da installare, sovradimensionato ricarica maniglia ti aiuta a cancellare inceppamento ed espellere un camerati tondo rapidamente ed efficientemente. Costruzione in acciaio lavorati, con una caratteristica forma tubolare e profondo, flauti corkscrewpattern dare un ottimo acquisto e un look elegante. Nessun gunsmithing necessaria.
Specifiche: acciaio finitura nera opaca. Benelli/Beretta si inserisce Benelli M1/M2 (CAL. 12/20) e Beretta Extrema. Sughereto si inserisce calibro 12 Remington 1100 e 11-87. Win. / FN si inserisce argento Browning Winchester SX2/SX3 e SLP FN.
Altro...
Punteggi dei clienti per NORDIC COMPONENTS SPEED BOLT HANDLE, BENELLI/BERETTA
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.4
Awesome(17.05.2012)
I just picked up an FN SLP Mark 1 and, like everything, I wanted to see what aftermarket stuff I could throw on it. Im very pleased with the shotgun and figured putting one of these on would make it even better. I did not anticipate how big of a difference this small piece would make. When charging the stock handle, especially when shouldered, I noticed my hand would rub against the housing primarily because of the limited size of the handle, and how close it rides to the bolt. With the Nordic handle you get a larger, easier to grab, handle which sticks out a little farther. Charging the Nordic can be done quickly and easily both over or under handed. Its an even bigger difference maker than putting an oversized charging handle (BCM Gunfighter) on your AR. BUY IT!!!!!!!!!!!
OEM-equipped on M2 3-Gun Edition(23.09.2012)
The NC speed charging handle is an excellent replacement for the factory handle. The NC handle weighs 14 grams, while the stock handle is 12 grams. The NC handle rotates inside the bolt housing, but it does not interfere with the use of the M2. The M2 3-Gun edition comes with this handle, and it is a fast 3 second replacement.
A+++++(12.01.2013)
Way better than expected!!!!
Thoroughly impressive(15.01.2015)
This is awesome. Great grip purchase due to the milling twist pattern, perfectly sized (big enough to be tactically advantageous is high stress situations where fine motor skills are diminished, not so big that it's stupid), weight close to stock (very slightly heavier), rotation is a good feature, and looks nice (tactiCOOL).
Poor design(03.04.2017)
Comfortable to use but needs modification out of the box to be installed on Benelli M2. When charging the bolt the bolt handle contacts the receiver and is pushed outward. This means that the bolt handle is no longer locked into the bolt and can easily fall out. This is a design flaw that could have been easily addressed at the factory and the fact that it wasn't gives me little faith in other Nordic Component products.