Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.
Altro...
Ferroviario di velivolo-grado alluminio adattatore consente di utilizzare Picatinny portata 3/8" o europeo 11mm monta trovato su molti fucili bolt-action rimfire a coda di rondine. Sei crossbolts applicare una pressione uniforme lungo la lunghezza della coda di rondine per mantenere il binario adattatore centrato. Generoso, Croce danno slot è aumentato il ambito anello e ottiche scelte, sia per la concorrenza di plinking o informale di fine settimana. Perfetto per il montaggio di uno spettacolo di cane rosso. Viti di serraggio anche montare nei fori praticati ugualmente allargare le gambe, quindi si può facilmente scivolare sul Monte sulle rotaie sovradimensionati. Si estende approssimativamente. 620" sopra a coda di rondine. 4" singolo rail pesa 3,1 once (g). Due sezioni di binario 1" pesano 75 once (g) ciascuna. Hardcoat anodizzato, finitura nera opaca.
Altro...
Punteggi dei clienti per BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Rail Mounting Problems(17.04.2014)
I successfully mounted this blk technologies weaver/ picatinny monolithic rail adapter to the "SWISS PRODUCTS SCHMIDT-RUBIN K31 SCOPE MOUNT" with no problems. In this respect the product is fine
However, when trying to mount my Larue QD LT112 rifle scope mount to this monolithic rail, the cross slots of the rail did not align with the slots of the riflescope mount. Thus I could not mount my riflescope.
Just to make sure it wasn't user error, I removed a riflescope, with standard 2 piece rings, from another rifle I had. It had been mounted on picatinny rails, but it too did not fit on the blk technologies rail.
So I guess this picatinny weaver adapter from blk technologies can only use 2 piece rings, not monolithic scope rings. Also, those 2 piece rings will be set at a different measurement than MIL-STD-1913 rails or its affiliates; you can't just swap your QD riflescope between rails because they won't fit.
I'll send this back in and get the 2 piece adapter, but I just can't help but wonder, why did they machine it like this?
Nice Dovetail to Weaver Rail(18.04.2017)
I used this rail on an old yet fun to shoot Glenfield Marlin model 75 dovetail then topped it off with a Bushnell trs-25 red dot. A very welcome relief to some aging eyes. The rail fit very nicely and snugged up very tight. It's simple to install and comes with the required allen wrench. It takes up the entire length of the dovetail on the model 75 and looks pretty cool. You will want to measure your dovetail and make sure it is "standard" width. I like the fact it is one piece so the finish looks very good.
And of course Brownell's is second to none with shipping and order tracking. Overall very happy with this purchase.
N. prodotto: 749012540 BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT Parti Fabbricante: BKL566MB814136025215 Ferroviario di velivolo-grado alluminio adattatore consente di utilizzare Picatinny portata 3/8" o europeo 11mm monta trovato su molti fucili bolt-action rimfire a coda di rondine. Sei crossbolts applicare una pressione uniforme lungo la lunghezza della coda di rondine per mantenere il binario adattatore centrato. Generoso, Croce danno slot è aumentato il ambito anello e ottiche scelte, sia per la concorrenza di plinking o informale di fine settimana. Perfetto per il montaggio di uno spettacolo di cane rosso. Viti di serraggio anche montare nei fori praticati ugualmente allargare le gambe, quindi si può facilmente scivolare sul Monte sulle rotaie sovradimensionati. Si estende approssimativamente. 620" sopra a coda di rondine. 4" singolo rail pesa 3,1 once (g). Due sezioni di binario 1" pesano 75 once (g) ciascuna. Hardcoat anodizzato, finitura nera opaca.
Colore:
Black
Materiale:
Alluminio
Numero di basi:
2 pezzi
Tipo:
Basi a coda di rondine,Picatinny
Peso della spedizione: 0.136kgAltezza di spedizione: 61mmLarghezza di spedizione: 107mmLunghezza di spedizione: 183mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 749012541 BKL TECHNOLOGIES 4" DOVETAIL TO WEAVER ADAPTER MOUNT Parti Fabbricante: BKL568MB814136025222 Ferroviario di velivolo-grado alluminio adattatore consente di utilizzare Picatinny portata 3/8" o europeo 11mm monta trovato su molti fucili bolt-action rimfire a coda di rondine. Sei crossbolts applicare una pressione uniforme lungo la lunghezza della coda di rondine per mantenere il binario adattatore centrato. Generoso, Croce danno slot è aumentato il ambito anello e ottiche scelte, sia per la concorrenza di plinking o informale di fine settimana. Perfetto per il montaggio di uno spettacolo di cane rosso. Viti di serraggio anche montare nei fori praticati ugualmente allargare le gambe, quindi si può facilmente scivolare sul Monte sulle rotaie sovradimensionati. Si estende approssimativamente. 620" sopra a coda di rondine. 4" singolo rail pesa 3,1 once (g). Due sezioni di binario 1" pesano 75 once (g) ciascuna. Hardcoat anodizzato, finitura nera opaca.
Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.
Altro...
Ferroviario di velivolo-grado alluminio adattatore consente di utilizzare Picatinny portata 3/8" o europeo 11mm monta trovato su molti fucili bolt-action rimfire a coda di rondine. Sei crossbolts applicare una pressione uniforme lungo la lunghezza della coda di rondine per mantenere il binario adattatore centrato. Generoso, Croce danno slot è aumentato il ambito anello e ottiche scelte, sia per la concorrenza di plinking o informale di fine settimana. Perfetto per il montaggio di uno spettacolo di cane rosso. Viti di serraggio anche montare nei fori praticati ugualmente allargare le gambe, quindi si può facilmente scivolare sul Monte sulle rotaie sovradimensionati. Si estende approssimativamente. 620" sopra a coda di rondine. 4" singolo rail pesa 3,1 once (g). Due sezioni di binario 1" pesano 75 once (g) ciascuna. Hardcoat anodizzato, finitura nera opaca.
Altro...
Punteggi dei clienti per BKL TECHNOLOGIES 2-PIECE DOVETAIL TO WEAVER ADAPTER MOUNT
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 3.5
Rail Mounting Problems(17.04.2014)
I successfully mounted this blk technologies weaver/ picatinny monolithic rail adapter to the "SWISS PRODUCTS SCHMIDT-RUBIN K31 SCOPE MOUNT" with no problems. In this respect the product is fine
However, when trying to mount my Larue QD LT112 rifle scope mount to this monolithic rail, the cross slots of the rail did not align with the slots of the riflescope mount. Thus I could not mount my riflescope.
Just to make sure it wasn't user error, I removed a riflescope, with standard 2 piece rings, from another rifle I had. It had been mounted on picatinny rails, but it too did not fit on the blk technologies rail.
So I guess this picatinny weaver adapter from blk technologies can only use 2 piece rings, not monolithic scope rings. Also, those 2 piece rings will be set at a different measurement than MIL-STD-1913 rails or its affiliates; you can't just swap your QD riflescope between rails because they won't fit.
I'll send this back in and get the 2 piece adapter, but I just can't help but wonder, why did they machine it like this?
Nice Dovetail to Weaver Rail(18.04.2017)
I used this rail on an old yet fun to shoot Glenfield Marlin model 75 dovetail then topped it off with a Bushnell trs-25 red dot. A very welcome relief to some aging eyes. The rail fit very nicely and snugged up very tight. It's simple to install and comes with the required allen wrench. It takes up the entire length of the dovetail on the model 75 and looks pretty cool. You will want to measure your dovetail and make sure it is "standard" width. I like the fact it is one piece so the finish looks very good.
And of course Brownell's is second to none with shipping and order tracking. Overall very happy with this purchase.