Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for Faxon Firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all Faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon Firearms highly recommends the use of Loc-Tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm.
Altro...
Perfetto per qualsiasi sistema ferroviario, questi blocchi di gas ultra-basso profilo sono le canne di compagno ideale per armi da fuoco Faxon (o qualsiasi altro) con un giornale del gas di diametro standard. Fatto da acciaio ad alta resistenza, tutti i blocchi di gas Faxon sono un lustro nero corrispondente alla loro barili. Per le compilazioni di leggeri, il blocco viene praticato attraverso il centro del profilo. I morsetti del blocco di gas verso la canna con 3 chiavi a brugola sulla parte inferiore del blocco. Faxon armi consiglia vivamente l'uso di Loc-Tite o composti simili frenafiletti. Blocchi di gas sarà molto caldo, in modo da scegliere un composto secondo l'utilizzo previsto del firearm.
Altro...
Punteggi dei clienti per FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .625
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
3 builds and no cycling failures(03.11.2017)
I built my first rifle with an unknown name brand gas block. It had cycling issues and it did not feed on 10th or 20th round fired. So I decided to replace it with this gas block, Brownell's nitride gas tube and viola! I've had no issues since. I built 300 BO and 308 ARs using same gas block, no problems.
LT 308 Block(07.08.2018)
In my desire to piece together a light 308, I chose this Faxon GB and put it on a Faxon 18" rilfe length Pencil Bbl. I really wanted an adjustable block, but now that I have shot it, I'm convinced this was the right choice for the goals of this build. I have been running some hot surplus ball down the barrel, and the block is staying put (no set screw dimpling was performed, just LocTite and torque). Fits , with plenty of headroom, under a Midwest Ind. SS MLock float handguard. Oh, and the roll pin for the gas tube is staying put too.
N. prodotto: 100022860 FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .625 Parti Fabbricante: GB-LP-625-3816341021006 Perfetto per qualsiasi sistema ferroviario, questi blocchi di gas ultra-basso profilo sono le canne di compagno ideale per armi da fuoco Faxon (o qualsiasi altro) con un giornale del gas di diametro standard. Fatto da acciaio ad alta resistenza, tutti i blocchi di gas Faxon sono un lustro nero corrispondente alla loro barili. Per le compilazioni di leggeri, il blocco viene praticato attraverso il centro del profilo. I morsetti del blocco di gas verso la canna con 3 chiavi a brugola sulla parte inferiore del blocco. Faxon armi consiglia vivamente l'uso di Loc-Tite o composti simili frenafiletti. Blocchi di gas sarà molto caldo, in modo da scegliere un composto secondo l'utilizzo previsto del firearm.
64.9CHF119CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Adatto per:
AR-15
Diametro interno:
.625
Materiale:
Acciaio
Tipo:
Low Profile
Peso della spedizione: 0.039kgAltezza di spedizione: 51mmLarghezza di spedizione: 76mmLunghezza di spedizione: 76mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100022859 FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .750 Parti Fabbricante: GBLP7503816341020986 Perfetto per qualsiasi sistema ferroviario, questi blocchi di gas ultra-basso profilo sono le canne di compagno ideale per armi da fuoco Faxon (o qualsiasi altro) con un giornale del gas di diametro standard. Fatto da acciaio ad alta resistenza, tutti i blocchi di gas Faxon sono un lustro nero corrispondente alla loro barili. Per le compilazioni di leggeri, il blocco viene praticato attraverso il centro del profilo. I morsetti del blocco di gas verso la canna con 3 chiavi a brugola sulla parte inferiore del blocco. Faxon armi consiglia vivamente l'uso di Loc-Tite o composti simili frenafiletti. Blocchi di gas sarà molto caldo, in modo da scegliere un composto secondo l'utilizzo previsto del firearm.
54.9CHF69CHF 54.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Perfect for any rail system, these ultra-low profile gas blocks are the ideal companion for Faxon Firearms (or any other) barrels with a standard diameter gas journal. Made from high-strength steel, all Faxon gas blocks are a matching black luster to their barrels. For lightweight builds, the block is drilled through the middle of the profile. The gas block clamps on to the barrel using 3 allen keys on the bottom of the block. Faxon Firearms highly recommends the use of Loc-Tite or similar thread-locking compounds. Gas blocks will get very hot, so pick a compound according to your intended use of the firearm.
Altro...
Perfetto per qualsiasi sistema ferroviario, questi blocchi di gas ultra-basso profilo sono le canne di compagno ideale per armi da fuoco Faxon (o qualsiasi altro) con un giornale del gas di diametro standard. Fatto da acciaio ad alta resistenza, tutti i blocchi di gas Faxon sono un lustro nero corrispondente alla loro barili. Per le compilazioni di leggeri, il blocco viene praticato attraverso il centro del profilo. I morsetti del blocco di gas verso la canna con 3 chiavi a brugola sulla parte inferiore del blocco. Faxon armi consiglia vivamente l'uso di Loc-Tite o composti simili frenafiletti. Blocchi di gas sarà molto caldo, in modo da scegliere un composto secondo l'utilizzo previsto del firearm.
Altro...
Punteggi dei clienti per FAXON FIREARMS LOW PROFILE GAS BLOCK 3 SCREW .625
Numero di punteggi: 2
Da brownells.com: 2
Punteggio medio: 5
3 builds and no cycling failures(03.11.2017)
I built my first rifle with an unknown name brand gas block. It had cycling issues and it did not feed on 10th or 20th round fired. So I decided to replace it with this gas block, Brownell's nitride gas tube and viola! I've had no issues since. I built 300 BO and 308 ARs using same gas block, no problems.
LT 308 Block(07.08.2018)
In my desire to piece together a light 308, I chose this Faxon GB and put it on a Faxon 18" rilfe length Pencil Bbl. I really wanted an adjustable block, but now that I have shot it, I'm convinced this was the right choice for the goals of this build. I have been running some hot surplus ball down the barrel, and the block is staying put (no set screw dimpling was performed, just LocTite and torque). Fits , with plenty of headroom, under a Midwest Ind. SS MLock float handguard. Oh, and the roll pin for the gas tube is staying put too.