Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz

BROWNELLS
ACRO CUT SLIDE FOR GLOCK® 17 GEN 3

050806113404 078000579
Built-In Mount for Aimpoint Sight; Easy To Customize With Factory & Aftermarket Parts
The Brownells Acro Cut Slide for Glock® 17 Gen3 brings the ease and convenience of our popular RMR Slides to folks who prefer to mount an Aimpoint Acro P-1 red dot sight on their pistols. This slide comes with a slot machined into the top for mounting the Acro P-1 - just screw on the sight (screws included) and... hit the range! All Acro Cut slides have factory-style rear cocking serrations, plus front serrations for easier slide manipulation - chamber checks and jam clearance. A window cutout on top between the front serrations aids in heat dissipation to cool the barrel during extended fire. Plus, if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.), the window lets a bit of that bling shine through. Fits Gen3 Glock® 17 pistols & clones Machined from corrosion-resistant 17-4 stainless steel billet Pre-cut Aimpoint Acro P-1 mounting slot Factory front & rear sight cuts, too Distinctive top window cutout Each Acro Cut Slide for Glock® 17 is precision machined from solid 17-4 stainless steel billet that's heat-treated to Rc 41-44 on the Rockwell C scale for excellent resistance to galling and surface wear. Inside, the slide is machined to accept readily available factory or aftermarket Gen3 Glock® parts. Outside, there's a Glock® factory rear sight dovetail and a standard Glock® front sight tenon cut ready for any factory or aftermarket "iron" sights (actually, plastic or steel) that can be co-witnessed with the Acro P-1. A tough, non-reflective Black Nitride finish boosts the slide's resistance to surface wear and protects it from corrosion. Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
279.9 279.9 1 CHF
Référence: 078000579
BROWNELLS SLIDE WITH AIMPOINT ACRO FOR GLOCK® 17 GEN 3 W/WINDOW
Ref Fabricant: NONE 050806113404 Les toboggans Brownell SCRO Cut Glock sont entièrement usinés à partir d'acier inoxydable traité par la chaleur et sont dotés d'une finition noir-nitride pour le protéger de la corrosion et de l'usure. Les toboggans de coupe Brownells ACRO sont dotés de dentelures arrière de style OEM et de dentelures avant supplémentaires pour une manipulation améliorée. Les toboggans coupés ACRO sont également dotés d'une fenêtre coupée sur le dessus entre les dentelures avant qui réduit le poids. L'usinage sur les toboggans Brownells ACRO Cut Glock ne s'arrête pas là; les diapositives comporte également une coupe usinée directement dans la glissière pour s'adapter à un Aimpoint ACRO P-1, permettant une acquisition rapide et facile de la cible. En interne, la diapositive est usinée aux spécifications de l'usine Glock, de sorte qu'il va accepter tous les composants standard. Doublure de canal requise pour ces diapositives. Les revêtements de canal sont un ajustement de presse et exigent un outil pour installer.
279.9 CHF 218 CHF 279.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Calibre: 9 mm Luger Finition: Black Nitride Manufacture: Glock Modèle: 17 Style: Window Visées: Aimpoint Acro

Restrictions d'Achat

  • Permis d'acquisition d'arme requis

Caractéristiques

Calibre: 9 mm Luger Finition: Black Nitride Manufacture: Glock Modèle: 17 Style: Window Visées: Aimpoint Acro Poids du colis: 0.308kg Hauteur d'expédition: 76mm Largeur d'expédition: 76mm Longueur d'expédition: 229mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x



Built-In Mount for Aimpoint Sight; Easy To Customize With Factory & Aftermarket Parts
The Brownells Acro Cut Slide for Glock® 17 Gen3 brings the ease and convenience of our popular RMR Slides to folks who prefer to mount an Aimpoint Acro P-1 red dot sight on their pistols. This slide comes with a slot machined into the top for mounting the Acro P-1 - just screw on the sight (screws included) and... hit the range! All Acro Cut slides have factory-style rear cocking serrations, plus front serrations for easier slide manipulation - chamber checks and jam clearance. A window cutout on top between the front serrations aids in heat dissipation to cool the barrel during extended fire. Plus, if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.), the window lets a bit of that bling shine through. Fits Gen3 Glock® 17 pistols & clones Machined from corrosion-resistant 17-4 stainless steel billet Pre-cut Aimpoint Acro P-1 mounting slot Factory front & rear sight cuts, too Distinctive top window cutout Each Acro Cut Slide for Glock® 17 is precision machined from solid 17-4 stainless steel billet that's heat-treated to Rc 41-44 on the Rockwell C scale for excellent resistance to galling and surface wear. Inside, the slide is machined to accept readily available factory or aftermarket Gen3 Glock® parts. Outside, there's a Glock® factory rear sight dovetail and a standard Glock® front sight tenon cut ready for any factory or aftermarket "iron" sights (actually, plastic or steel) that can be co-witnessed with the Acro P-1. A tough, non-reflective Black Nitride finish boosts the slide's resistance to surface wear and protects it from corrosion. Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Newsletter