Il Carrello è vuoto.

Carrello

0917309915

Suisse / Schweiz

Lingue: Deutsch Français Italiano

ZRO DELTA
AR-15 LOWER PARTS KIT

100500154

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Altro...

Il Kit di parti inferiori Enhanced è fosfato rivestito e include tutte le parti fondamentali per il LPK meno la guardia del grilletto, Grip e controllo del fuoco assembly.

Altro...

Punteggi dei clienti per ZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 2.9

Great quality at a reasonable price! (31.03.2017)

Great finish and fit. Not covered in sloppy grease but lightly coated in preservative. Everything fit great! The front pivot pin fit very snugly and took out all the upper/lower slop in two sets I tried it in. I've spent money on National Match and oversized pins and this one worked just as well. I'll buy again for sure.

I do not recommend. (12.05.2017)

Kit seemed fine looking it over initially. Once installed the safety selector switch does not smoothly rotate from safe to fire. It feels gritty and takes more force than it should. My other issue is the take down pins. Same issue, they do not smoothly push out and take more force than normal. It's like the detent is binding on the surface of the selector and take down pins. The rest of the kit is fine and I'll make do with the take down pins. The safety selector, I will have to replace for something else. It just feels terrible.

Works fine (25.08.2017)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (02.09.2017)

A few non-standard parts here- for one, the takedown detents are black (not gold) and asymmetrical in shape. The blunt end needs to face the pin, because the pointy end will lock your pin. FCG pins are .155 or greater, and would not pass through a Noveske lower (NBD, I have a pile of standard pins on my bench). Selector detent, also too pointy to interface with the selector (or recess too deep?) maybe they will break in as they grind, but I junked those too. Lastly, the BHO roll pin is a spiral vs. a C (again, no biggie, just strange). I would avoid this product.

Get what you pay for (12.12.2017)

I bought a few of these. They are nothing special and priced accordingly. I had a bad mag dis connector and they quickly sent me a replacement, kit comes with a very plastic dis connect button. A nice cheap way to finish off your project and get it through the paces, then swap out for better parts later if you see need to. They will probably stay in a while and work fine.

Poor quality overall (31.12.2017)

Same issues as the other reviewers - should've known better than to buy this.

The detents for the takedown grab the takedown pins far more than they should. Took a file to them to round them off a bit to alleviate this.

The safety included had a horrible feel to it - very gritty and more resistance than should be present. Swapped it for another safety lever that I had and the problem went away .

Also worth noting, this kit does not include a grip screw. The picture accurately depicts that, I just overlooked it and could see others overlooking the same. Luckily I had a few extra on hand.

For the money...this kit can't be beat! (19.01.2018)

I have purchased and used these kits in the past and recently purchased two more. After reading the reviews, I thought I would give my findings. Maybe because I am a gunsmith and an experienced builder, I have not had a single problem! I will be purchasing more.

Waste of Money (06.02.2018)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (08.08.2018)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (02.09.2018)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Leggi più recensioni su brownells.com

45.9 45.9 1 CHF

N. prodotto: 100500154
ZRO DELTA AR-15 LOWER PARTS BUILDER KIT
Parti Fabbricante: 703500081520 Il Kit di parti inferiori Enhanced è fosfato rivestito e include tutte le parti fondamentali per il LPK meno la guardia del grilletto, Grip e controllo del fuoco assembly.

45.9 CHF 20 CHF 45.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: AR-15

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Caratteristiche

Adatto per: AR-15 Peso della spedizione: 0.07kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 114mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.x

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Altro...

Il Kit di parti inferiori Enhanced è fosfato rivestito e include tutte le parti fondamentali per il LPK meno la guardia del grilletto, Grip e controllo del fuoco assembly.

Altro...

Punteggi dei clienti per ZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Numero di punteggi: 10
Da brownells.com: 10
Punteggio medio: 2.9

Great quality at a reasonable price! (31.03.2017)

I do not recommend. (12.05.2017)

Works fine (25.08.2017)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (02.09.2017)

Get what you pay for (12.12.2017)

Poor quality overall (31.12.2017)

For the money...this kit can't be beat! (19.01.2018)

Waste of Money (06.02.2018)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (08.08.2018)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (02.09.2018)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Leggi più recensioni su brownells.com

Scelti da altri clientie

AERO PRECISION AR-15 M4E1 STRIPPED LOWER RECEIVER BLACK 5.56MM
AR-15 M4E1 STRIPPED LOWER RECEIVERS 5.56MM

AERO PRECISION

Riordinato

CHF 269.90 *

Lower receivers

BROWNELLS AR-15 H1 CARBINE BUFFER
AR-15 HEAVY CARBINE BUFFERS

BROWNELLS

In magazzino

CHF 49.90 * CHF 49.90 - CHF 79.90*

VELOCITY TRIGGERS AR-15 VELOCITY TRIGGER 3LB CURVED
AR-15 VELOCITY TRIGGER CURVED

VELOCITY TRIGGERS

Riordinato

CHF 174.90 *

Grilletti

4.3

D.S. ARMS RECEIVER EXTENSION TUBE
AR-15/M16 MIL-SPEC BUFFER TUBE

D.S. ARMS

Riordinato

CHF 29.90 *

Buffer tubes

4.2

THERMOLD STRIPPER CLIPS, 10-PAK
AR-15/M16 STRIPPER CLIPS

THERMOLD

In magazzino

CHF 13.90 *

Speedloaders per caricatori

3.5

Accesso

Hai dimenticato la password?
Registrati

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATALOGO PRODOTTI

ORDINARE

CUSTOMER SERVICE

Benvenuti!

Benvenuti su Brownells.ch, il principale rivenditore online di accessori per armi da fuoco, componenti di pistole e utensili per armaioli in Svizzera!

La nostra offerta

Se ti piace sparare, lavorare sulle armi da fuoco come artigiano o per hobby, o semplicemente possiedi un'arma, questo è il posto per te! Grazie alla nostra grande esperienza, ogni giorno, tiratori, armaioli professionisti, hobbisti, militari, esponenti delle forze dell'ordine e appassionati d'armi si rivolgono a Brownells.ch per trovare accessori e componenti di alta qualità e fare rifornimento di ciò di cui hanno bisogno.