Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
616612925879 100800170
The ELF Match Pro Trigger has been built for performance. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The Elf Match Pro Trigger is identical to the Match Trigger with the addition of a proprietary threaded mounting system.  The combination of aerospace grade sealed bearings, precision ground threaded bushings, and screws instead of traditional pins provide a rock-solid trigger system.  Since their inception, AR platforms have always used pins to mount the trigger and hammer in the lower receiver. Because pins require some ""play"" in order to be installed, there is always a little play in the trigger system. This new threaded system adds a level of ""solid"" you need to feel to understand the difference. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using the supplied installation screws. The Match Pro trigger may be ordered with a curved or straight shoe.   The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you.   Features   Proprietary Threaded mounting system for rock solid installation. Straight or Curved Available Incremental Adjustable Knob Compatible with ALL calibers - 5.56, 9mm, .308 etc. Fits any mil-spec AR-15 (Standard pin size, no large pin Colt) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power proprietary Double-Double torsion hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans
314.9 314.9 2 CHF
N. prodotto: 100800170
ELFTMANN AR-15 MATCH PRO TRIGGER CURVED FINGER ADJUSTABLE
Parti Fabbricante: MATCH PRO-C FA 616612925879
Avvisa quando diventa disponibile
Non disponibile.
Caratteristiche: Adatto per: AR-15 Tipo: Curved

Caratteristiche

Adatto per: AR-15 Tipo: Curved Peso della spedizione: 0.082kg Altezza di spedizione: 25mm Larghezza di spedizione: 76mm Lunghezza di spedizione: 89mm

Dettagli dell'elemento

Made in Usa
Classificazione per l'export dagli US: 0A501.c



N. prodotto: 100800169
ELFTMANN AR-15 MATCH PRO TRIGGER STRAIGHT FINGER ADJUSTABLE
Parti Fabbricante: MATCHPROSFA 616612925879
314.9 CHF 0 CHF 314.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Caratteristiche: Adatto per: AR-15 Tipo: Straight
The ELF Match Pro Trigger has been built for performance. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. The Elf Match Pro Trigger is identical to the Match Trigger with the addition of a proprietary threaded mounting system.  The combination of aerospace grade sealed bearings, precision ground threaded bushings, and screws instead of traditional pins provide a rock-solid trigger system.  Since their inception, AR platforms have always used pins to mount the trigger and hammer in the lower receiver. Because pins require some ""play"" in order to be installed, there is always a little play in the trigger system. This new threaded system adds a level of ""solid"" you need to feel to understand the difference. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using the supplied installation screws. The Match Pro trigger may be ordered with a curved or straight shoe.   The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you.   Features   Proprietary Threaded mounting system for rock solid installation. Straight or Curved Available Incremental Adjustable Knob Compatible with ALL calibers - 5.56, 9mm, .308 etc. Fits any mil-spec AR-15 (Standard pin size, no large pin Colt) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power proprietary Double-Double torsion hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans
Newsletter