Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

STARK EQUIPMENT GROUP
AR-15 SE-1 PISTOL GRIP

858193004011 100004343

Ergonomic Comfort, Less Fatigue, Maximum Control During Rapid Fire

Drop-in replacement for factory pistol grip is designed to give the tactical operator maximum weapon control with minimum fatigue. Every aspect of the shooter-to-weapon interface was analyzed and tested to improve on the USGI A2 grip and give the shooter the best control in any type of operational environment. One-piece construction with integral triggerguard ensures the operator’s finger doesn’t get caught between the guard and the trigger and eliminates other pinch points. Over-molding where the grip meets the receiver helps keep the hand positioned exactly where it should be during fast movement, long periods in the ready position, and during rapid or full-auto fire. Palm swell, arched backstrap, flared bottom with forward finger ledge, and molded-in stippling further ensure to a firm, stress-free grip on the weapon. Molded from durable, reinforced polymer that resists impact, temperature extremes, moisture, and most cleaning solvents and oils. Snug-fitting, synthetic rubber plug in the bottom pulls out to allow storage inside the grip. Cavities inside the plug provide rattle-free storage for two spare CR-123 batteries. Standard SE-1 model available in Black.

SPECS: Molded polymer, Black. Includes mounting hardware and instructions.

Plus...

Confort ergonomique, moins de Fatigue, un contrôle maximal au cours de tir rapide

Remplacement pour poignée pistolet usine est conçu pour donner à l’opérateur tactique contrôle maximal arme avec moins de fatigue. Tous les aspects de l’interface de jeu de tir-à-arme a été analysé et testé pour améliorer le grip USGI A2 et donner le tireur le meilleur contrôle dans tout type d’environnement opérationnel. Construction monopièce avec triggerguard intégré assure le doigt de l’opérateur ne se coincer entre la garde et la gâchette et élimine les autres points de pincement. Trop de moulage où la poignée rencontre le récepteur permet de garder la main positionnée exactement où il doit être en mouvement rapide, de longues périodes dans la position "prêt" et au cours de l’incendie rapide ou entièrement automatique. Backstrap Houle, arqué, bas évasé avec rebord de doigt vers l’avant, de palme et moulé en pointillé s’assurer d’une prise ferme et sans stress sur l’arme. Moulés à partir de polymère durable et renforcée qui résiste à l’impact, températures extrêmes, l’humidité et plus de nettoyage solvants et huiles. Caoutchouc synthétique ajustés Branchez le fond se retire pour permettre le stockage à l’intérieur de la poignée. Cavités à l’intérieur de la fiche fournissent hochet-gratuit de stockage pour deux piles de rechange CR-123. Modèle SE-1 standard disponible en noir ou Dark Earth.

FICHE

: polymère moulé, noir ou Dark Earth. Comprend le matériel de montage et instructions.

Plus...

Évaluations client de STARK EQUIPMENT GROUP SE-1 PISTOL GRIP POLYMER BLACK

Nombre d'évaluations: 17
De brownells.com: 17
Note moyenne: 4.4

Incredibly comfortable (24.12.2009)

This is the best grip I've ever owned. No more killing the middle finger knuckle on your trigger hand. Even better then replacement trigger guards from magpul or others that fill in the gap. Comfort and feeling on the grip is superb. Beats out the magpul MIAD grip set and tango down grips Ive owned before. The only thing is it can sometimes be a pain to take the grip plug out, but I'm sure its for keeping stored valuables in place. Guaranteed switch if you try one and if you own more then one AR, all the grips will soon be replaced.

Great pistol grip (15.11.2011)

I recommend this grip for anyone that is not that skilled at building lowers. I have seen countless lowers damaged when trying to put in the trigger guard roll pin, I have a few under my belt. The grip is very ergonomic and the best aspect is that there is no roll pin installation required!

Great product. One small flaw. (03.11.2013)

Very ergonomic, and fits nice in the hands. I have smaller hands, but it's still easier to engage and disengage the safety selector switch without moving my hand around to the side. The only gripe I have about this product is since it doubles as a trigger guard, the end piece that sits flush with the magwell didn't sit so flush with my spikes tactical lower. It gave the idea that the magwell was out of spec because the mags would not drop free, but it was because that part was slightly protruding. Easy fix though, just had to take off the grip and file it down a bit so the mags would drop free. I know it wasn't the mags because I tried it with MPAGs, USGI, and mags I had left over from Active Duty and none would drop free. About 30 minutes of extra work for a great product isn't too bad.

Best In Class (25.12.2009)

Places your hand perfectly to manipulate all of the controls easily.
Hand is placed slightly lower and at a straighter angle.
Magpul is now second class.
There is even a thumb rest built into (ambi) the grip. Your thumb falls naturally to this position.

Best Grip on the Market today. PERIOD!

One of the best grips on the market!!! (20.04.2010)

Bought this for my wifes AR15 for IPSC & 3 gun matches. Fits well in her smaller hands (she's 5'6" tall) & she loves it. Have just ordered 1 for my other AR as it fits my bigger hands (I'm 6'4" tall).
The straighter angle makes keeping your elbow tucked in a lot easier & puts less strain on your wrist.

Outstanding Grip (30.10.2010)

This grip is the "cure-all" to the AR15 trigger gap. It fits my hand very well and overall looks and finish are top notch. Installation took all of 2 minutes.
Only one complaint: Where's the camo version?

Great Pistol Grip Alternative (25.11.2010)

I bought this grip for an AR Build, the construction is excellent, it slipped right onto a STAG lower with no gap or play at all. It installs exactly like the factory standard pistol grips that normally come with either lower kits or complete rifles. My only recommendation is to consider this grip before installing the flat style trigger guard so that you do not have to remove the roll pin. Tools required: small flat head screw driver and a hex bit. I used a common house hold bit kit to install the grip in under 5 minutes. EXCELLENT PRODUCT!

Comfortable Grip (26.04.2011)

Seems durable enough so far. Necessary hardware included. Being one piece, it seems to close the gap at the rear of the trigger guard better than the two piece alternatives such as Magpul moe or miad grip w/ enhanced trigger guard. I put a short piece of a bicycle tire innertube over the grip to soften it up a bit and give me a stickier surface in wet conditions. Plug seems to seal well and can house two "123A" batteries.

Not So Useful for L.E./ Military (30.06.2011)

I bought this based on the reviews which are all saying this thing is awesome.. I installed the grip and I kreally liked the integrated trigger guard and the way it indexes my hand lower on the rifle. When I used the grip today in training, I was not happy that the selector can't be operated without having to index my hand and give up a stable firing grip. This may not be a big deal in target shooting, but this is not a practical grip for a tactical enviornment where getting the gun off safe in a hurry could mean your life.

#3 Behind ERGO and Hogue (22.07.2011)

I received my SE-1 AR-15 Pistol Grip in the mail on Thursday and took it to the police department armorer today (Fri. 7-22) to have
it installed.

I have pro's and con's about it but please, it is constructive criticism, not complaining. I took an ERGO grip off to put on the Stark. That is the comparison here.

1. The Stark grip feels larger in diameter than the ERGO. I don't have large hands so for me it is instead of the grip fitting into my
hand, it is more my hand has to work to fit the Stark grip.

2. The "grip" of the SE-1 is not as solid to the touch, but more as if it is smooth polished plastic and my hand has to squeeze down on the grip to hold it in place. The ERGO has a more soft rubber material and the friction is there to hold tight with little effort. The Stark
seems to require more effort to hold tight. The rippling of the plastic on the Stark is ok, but would be better in conjunction with a soft finish material, not the hard plastic. I tried using a padded bicycle glove as a shooting glove to hold the SE-1 and it helped, but are you going to use a glove everytime you go shooting. What if CQB starts and your glove is in the house? The grip just has a slickness about it, to hard and slippery.

3. I have more than one AR, three have the ERGO grips and one has the Stark. I am able to pick up the ones with the ERGO grip, then put
it down and pick up the Stark, all for the purpose of comparison. So far, the comfort of the ERGO is outweighing the Stark.

Today, a friend tried the grip and had a mediocre opinion. The two more friends all held the AR
with the Stark and just had no real enthusiastic response. There was no overall, total excitement over the fit and feel of the grip.

I don't know what to say or tell you as to what to do, it looks good and the storage is adequate, but other than that, really
nothing.

Fh.

My new favorite grip (16.03.2012)

Ever since Pachmayr stopped making the rubber grip for the AR (the one that looked like a revolver grip) I have been searching for a replacement. Like the Pachmayr, the Stark grip straightens out the grip angle and is more comfortable on my wrist. It also moves the hand down more and provides a better pull on the trigger for me and is a bit larger than most grips.

Love it!

Very comfortable AR15 Grip (18.06.2012)

I was suprised how easy it was to change the grip, it gives the AR a better feel and for me it made it easier to handle.

Solves a multitude of problems and needs (13.11.2012)

I'm buying one for each of my carbines. The benefits?

Do a training class for a while, and any little abrasive surface will start to make your fingers bleed or abrade. This grip eliminates the ones you'll typically encounter while shooting, engaging and disengaging the safety. When the jump recoils, your hand is usually gripping fairly tight - if you're not wearing gloves after a hundred rounds or so your hand will get a few sore spots. Not with the stark. It replaces your abrasive trigger guard, enlarging the area (like the Magpul one) You wont have to replace the buffer assembly backplate, because you can get the PB model to clip on your sling.

It's ultra smooth and changes the angle your hand has in relation o the FCG such that working CQB problems is easier on the wrist and forearm, you wont have to shove your forearm out to the side to ease the pressure on your wrist - at some point fatigue sets in with the other grips if you're 18 you don't notice it, I'm not 18 anymore, the ability to keep my elbows tucked in while maneuvering - priceless. I've met one guy who WANTED to use this grip, but couldn't, the palm swell was too much for his hands (6 feet tall and hands like a 10 year old). Everyone I've introduced this grip to bought one. The newer type has the sticky type finish on it, the older ones are slick, but sweat has never caused me to slip on this grip.

Best grip I have ever used on a AR- A+. (11.05.2013)

Most comfortable Grip I have ever used,very easy to install,none slip material is very comfortable,grip angle is very comfortable,will buy them for my other rifles

Great grip but.. (28.12.2013)

This is the second grip I have purchase, made by Stark. I really like this grip a lot. It places your trigger finger parallel with the AR frame receiver straight toward the trigger. The palm swell are ambidextrous. There's also an ambidextrous ledge where your trigger finger or thumb can rest onto. I also like the battery storage in the grip in case my Eotech 512 need a fresh battery. This grip is easy to install. I have the early version of this grip and it is fine. The stippling is good and the area without stippling is somewhat slippery when your hand gets wet. However with the flaring at the bottom of the grip, does prevent your hand from slipping off the grip all together.

Recently I purchased another Stark grip for my new AR build with a nice Armorsoft coating on the grip. The feel is great and it makes the grip less slippery, velvety feel to it. It enhances the gripping factor. The new grip retains it's same characteristics which is great BUT on my new grip, the Armorsoft rubbed off especially around the well opening. I have noticed that when I took the rubber battery holder of the grip, the coating was rubbing off from where my finger was exerting pressure while attempting to remove the battery holder from the grip. I know that Stark Equip makes quality product, this could be one of those that slipped away from QC. I have not use this grip for shooting yet. I'm disappointed with this Armorsoft.

Well worth the money (06.01.2014)

Very nice and comfortable grip. The grip has all the features you would want. The groves in the grip help keep your hand in the same spot each rime. The elimination of the trigger guard with a more open guard that is an extended part of the grip also covers the gap between the grip and the lower is a big plus in my book.

Awesome! (13.01.2014)

It feels so darn good in my hand i dont want to put it down. The best grip by far hands down. great quality to.

Lire 17 plus d'avis sur brownells.com

59.9 59.9 1 CHF

Référence: 100004343
STARK EQUIPMENT GROUP SE-1 PISTOL GRIP POLYMER BLACK
Ref Fabricant: SE1-AR-BL-CR 858193004011 Remplacement pour poignée pistolet usine est conçu pour donner à l’opérateur tactique contrôle maximal arme avec moins de fatigue. Tous les aspects de l’interface de jeu de tir-à-arme a été analysé et testé pour améliorer le grip USGI A2 et donner le tireur le meilleur contrôle dans tout type d’environnement opérationnel. Construction monopièce avec triggerguard intégré assure le doigt de l’opérateur ne se coincer entre la garde et la gâchette et élimine les autres points de pincement. Trop de moulage où la poignée rencontre le récepteur permet de garder la main positionnée exactement où il doit être en mouvement rapide, de longues périodes dans la position "prêt" et au cours de l’incendie rapide ou entièrement automatique. Backstrap Houle, arqué, bas évasé avec rebord de doigt vers l’avant, de palme et moulé en pointillé s’assurer d’une prise ferme et sans stress sur l’arme. Moulés à partir de polymère durable et renforcée qui résiste à l’impact, températures extrêmes, l’humidité et plus de nettoyage solvants et huiles. Caoutchouc synthétique ajustés Branchez le fond se retire pour permettre le stockage à l’intérieur de la poignée. Cavités à l’intérieur de la fiche fournissent hochet-gratuit de stockage pour deux piles de rechange CR-123. Modèle SE-1 standard disponible en noir ou Dark Earth.

59.9 CHF 0 CHF 59.90 *

En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.

Caractéristiques: Couleur: Noir Manufacture: AR-15 Matériaux: Polymer

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Couleur: Noir Manufacture: AR-15 Matériaux: Polymer Poids du colis: 0.136kg Hauteur d'expédition: 33mm Largeur d'expédition: 157mm Longueur d'expédition: 150mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.y.1

Ergonomic Comfort, Less Fatigue, Maximum Control During Rapid Fire

SPECS: Molded polymer, Black. Includes mounting hardware and instructions.

Plus...

Confort ergonomique, moins de Fatigue, un contrôle maximal au cours de tir rapide

FICHE

: polymère moulé, noir ou Dark Earth. Comprend le matériel de montage et instructions.

Plus...

Évaluations client de STARK EQUIPMENT GROUP SE-1 PISTOL GRIP POLYMER BLACK

Nombre d'évaluations: 17
De brownells.com: 17
Note moyenne: 4.4

Incredibly comfortable (24.12.2009)

Great pistol grip (15.11.2011)

Great product. One small flaw. (03.11.2013)

Best In Class (25.12.2009)

One of the best grips on the market!!! (20.04.2010)

Outstanding Grip (30.10.2010)

Great Pistol Grip Alternative (25.11.2010)

Comfortable Grip (26.04.2011)

Not So Useful for L.E./ Military (30.06.2011)

#3 Behind ERGO and Hogue (22.07.2011)

My new favorite grip (16.03.2012)

Very comfortable AR15 Grip (18.06.2012)

I was suprised how easy it was to change the grip, it gives the AR a better feel and for me it made it easier to handle.

Solves a multitude of problems and needs (13.11.2012)

Best grip I have ever used on a AR- A+. (11.05.2013)

Most comfortable Grip I have ever used,very easy to install,none slip material is very comfortable,grip angle is very comfortable,will buy them for my other rifles

Great grip but.. (28.12.2013)

Well worth the money (06.01.2014)

Awesome! (13.01.2014)

It feels so darn good in my hand i dont want to put it down. The best grip by far hands down. great quality to.

Lire 17 plus d'avis sur brownells.com

Poursuivre vos achats

PACHMAYR 1911 FULL SIZE GRAY/BLACK CHECKERED G-10 GRIPS
G-10 TACTICAL PISTOL GRIPS FOR 1911

PACHMAYR

En stock

CHF 59.90 *

Poignées

Sale

MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 17

MAGPUL

En stock

CHF 33.10 *

Ancien prix CHF 38.90

2.8

ED BROWN ALLEN HEAD GRIP SCREWS BLUED QUANITY 4
1911 ALLEN HEAD GRIP SCREWS

ED BROWN

En stock

CHF 18.90 * CHF 18.90 - CHF 69.90*

Vis Poignée

4.2

HOGUE RU/SL/CH FITS 1911 AUTO
SEMI-AUTO PISTOL GRIPS

HOGUE

En stock

CHF 37.90 * CHF 25.09 - CHF 39.90*

Poignées

4.6

KNS PRECISION .154" GEN. 2 MOD. 2 NON-ROTATING PIN SET
AR-15 GEN. 2 MOD. 2 NON-ROTATING PIN SET

KNS PRECISION

En stock

CHF 54.90 *

4.5

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.