The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Plus...
Le bloc d’étau de Sinclair est l’outil idéal pour la tenue en toute sécurité votre AR-15/AR-10® dans un étau d’établi. Le bloc de l’étau insère dans votre magazine bien comme un magazine et le fond que la moitié du bloc peut être fixée dans un étau. Vous pouvez incliner le bloc dans l’étau de travailler à un angle différent, si vous le souhaitez. Vous pouvez également insérer le bloc de l’étau dans la partie supérieure de l’inférieur, vous permettant de travailler sur la face inférieure. Le bloc de l’étau est en polyéthylène usinées de haute densité, donc il est très solide. Outil de grande workbench. AR-10® modèle seuls ajustements Armalite AR-10® fusils de modèle, ne convient pas de fusils modèle DPMS/SR25.
Plus...
Évaluations client de SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 2.8
Works great!(09.07.2017)
Has slots for Magazine Catch to positively retain the rifle - push mag release button to remove
Rugged & lubricious HDPE - waaaaay better than my previous block of wood!
MADE IN USA!!!
Doesn't work like simular products(23.10.2010)
This vise block does not fit very well in the lower receiver - DPMS / JD Machine, it is very sloppy and does not lock into place like a magazine does. The vise blocks that I have used in the past fit like a magazine and require you to eject the vise block like a magazine. When in the vise the whole gun moves around because it's so sloppy.
AR10 Block, NOT LR308 block(16.03.2013)
Here is the deal. This is an AR10 block, not an LR308 block. They use different mags, and therefor different vice blocks. Works fine in the rifle it was designed for! (At least the one I ordered does)
DOES NOT FIT(04.04.2017)
DOES not fit in DPMS lowers, have to mill down to make fit
Référence: 430106198 SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM Ref Fabricant: 14-150 BLEM Le bloc d’étau de Sinclair est l’outil idéal pour la tenue en toute sécurité votre AR-15/AR-10® dans un étau d’établi. Le bloc de l’étau insère dans votre magazine bien comme un magazine et le fond que la moitié du bloc peut être fixée dans un étau. Vous pouvez incliner le bloc dans l’étau de travailler à un angle différent, si vous le souhaitez. Vous pouvez également insérer le bloc de l’étau dans la partie supérieure de l’inférieur, vous permettant de travailler sur la face inférieure. Le bloc de l’étau est en polyéthylène usinées de haute densité, donc il est très solide. Outil de grande workbench. AR-10® modèle seuls ajustements Armalite AR-10® fusils de modèle, ne convient pas de fusils modèle DPMS/SR25.
35.9CHF159CHF 35.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Plus...
Le bloc d’étau de Sinclair est l’outil idéal pour la tenue en toute sécurité votre AR-15/AR-10® dans un étau d’établi. Le bloc de l’étau insère dans votre magazine bien comme un magazine et le fond que la moitié du bloc peut être fixée dans un étau. Vous pouvez incliner le bloc dans l’étau de travailler à un angle différent, si vous le souhaitez. Vous pouvez également insérer le bloc de l’étau dans la partie supérieure de l’inférieur, vous permettant de travailler sur la face inférieure. Le bloc de l’étau est en polyéthylène usinées de haute densité, donc il est très solide. Outil de grande workbench. AR-10® modèle seuls ajustements Armalite AR-10® fusils de modèle, ne convient pas de fusils modèle DPMS/SR25.
Plus...
Évaluations client de SINCLAIR INTERNATIONAL SINCLAIR AR-15 VISE BLOCK BLEM
Nombre d'évaluations: 4
De brownells.com: 4
Note moyenne: 2.8
Works great!(09.07.2017)
Has slots for Magazine Catch to positively retain the rifle - push mag release button to remove
Rugged & lubricious HDPE - waaaaay better than my previous block of wood!
MADE IN USA!!!
Doesn't work like simular products(23.10.2010)
This vise block does not fit very well in the lower receiver - DPMS / JD Machine, it is very sloppy and does not lock into place like a magazine does. The vise blocks that I have used in the past fit like a magazine and require you to eject the vise block like a magazine. When in the vise the whole gun moves around because it's so sloppy.
AR10 Block, NOT LR308 block(16.03.2013)
Here is the deal. This is an AR10 block, not an LR308 block. They use different mags, and therefor different vice blocks. Works fine in the rifle it was designed for! (At least the one I ordered does)
DOES NOT FIT(04.04.2017)
DOES not fit in DPMS lowers, have to mill down to make fit