Votre panier est vide.

Panier

0917309915

Suisse / Schweiz

Langues: Deutsch Français Italiano

VLTOR WEAPON SYSTEMS
AR-15 GAS BLOCK LOW PROFILE

100003996

One-Piece Design Fits Under Free-Float Handguards

Slim replacement for cumbersome USGI front sight/gas block tower features a low profile for a more streamlined appearance and less chance of snagging on vegetation and other gear. Covers only 1" of barrel length and reduces weapon’s forward weight for improved handling and maneuverability. Clamp On models squeeze around the barrel with included socket head screws. Set Screw models use included set screws at the bottom of the unit to anchor the gas block to the barrel for the lowest-profile installation.

Plus...

Conception monobloc Fits sous flottant Handguards

Slim remplacement pour tour de bloc encombrant USGI front sight/gaz dispose d'un profil bas pour une apparence plus simple et moins de chance d'accrochage sur la végétation et d'autres engins. Couvre seulement 1" de la longueur du canon et réduit le poids vers l'avant de l'arme pour améliorer la manipulation et la maniabilité. Bride sur modèles presser autour du barillet avec vis inclus. Set vis modèles utilisent des vis de fixation inclus au bas de l'appareil pour ancrer le bloc gaz au canon pour l'installation du profil le plus bas.

FICHE

: 17-4 PH en acier inoxydable, finition d'oxyde, noir mat. Inclut vis à tête hexagonale ou vis et goupille de tube de gaz. Tous les modèles sont de 1"(2,54 cm) de long. Modèles disponibles pour placer les canons avec. 625" O.D. ou. 750" à gaz de bloquer la position. Bride-sur les modèles ne s'adaptera pas sous les tubes de petit diamètre flottant ou ceux avec un canal de rail du bas exposée à l'intérieur de la garde-main comme VLTOR VIS, Daniel Defense et LaRue tactique. . 750" clamp On -. 926" (2,35 cm) de large, 1,388"(3,52 cm) de haut. . 625" clamp On -. 920" (2,33 cm) de large, 1,370"(3,48 cm) de haut. . 750" vis -. 907" (14 cm) de large,.1.352"(2,43 cm) de haut. . 625" vis -. 807" de large, 1,281" haut.

Plus...

Évaluations client de VLTOR WEAPON SYSTEMS AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.1

Poor Quality Set Screws (12.02.2015)

I have a VLTOR one piece upper so I thought this would be a good match. The gas block itself looks good. Unfortunately, one of the set screws stripped when I applied minimal torque with an Allen (hex) key. The other set screw was fine. I'm not sure if this was an isolated defect, but I ended up having to drill one of the set screws out. This is very disappointing considering the slightly higher cost of the VLTOR block. To their credit Brownells' did accept this as a return.

Precision at it's Best (24.08.2015)

I compared this block first hand with seven other blocks before deciding to install the VLTOR block. The finish is superior to most; deep black phosphate and very uniform. The finish is equal to two other excellent choices, the Brownell's branded block and the Bravo Company block. The vertical grooves machined into the block add a pleasing and distinctive look and theoretically may offer some additional surface area for cooling. The machining appears very precise. Installation was straight forward and fit was tight and precise.

Nice gas block (12.07.2014)

This is a nicely done gas block but it touches my handguard (MI Gen 2 SS) very slightly at the screw heads. It is barely touching and I have checked that it is not canted, etc. Disappointing, but I will use it for another build I have planned. I usually prefer clamp on attachment, but the BCM barrel came with a dimple under the gas port so the set screw block I am replacing this with should work fine. A little filing would fix the issue, but I would rather not have to.

Less than useful (14.06.2010)

The fact the screws are on the side should have been screaming at me. It is not low profile at all, the screws protrude so far when mounted it was impossible to fit under the DD 10" Lite rail. The screws do not recess enough for proper clearance. The other version I have seen of this would fit fine as the screws are recessed and are on the bottom.

No problems (19.06.2010)

I have this installed on my SPR build which has a
White Oak Armament barrel with Midwest Industries free float handguards and everything works perfectly. My rifle cycles correctly and the bolts for the gas block has not come loose. I did however use vibra-lock on the threads.

Perfect! (07.07.2010)

After having a nasty experience with the "set screw style" gas block I decided to use a clamp on and went with the Vltor. This gas block is very well made. It was a bit tight for the gas tube to fit in which is normal and once the tube was in everything with very smoothly. Make sure to loctite the screws and this thing wil stay forever. I put this underneath my TRX Extreme which is extremely skinny. This will fit under most handguards. I don't believe this gas block is made to fit under the DD Lites and Omegas, and also the LaRues. For the handguards it is made to fit under, I'd prefer no other.

Great Low-Pro Steel Gas Block (16.01.2011)

I used this on a 16" Mid-Length Gas System AA 6.5 Grendel barrel. I have fired it in both extreme heat at 100 degrees F, down to 18 degrees F with never a malfunction using various loads. This is one of the best steel low-pro gas blocks on the market. The gas tube does fit tightly, which is a good thing for a reliable gas circuit. Loc-tite is your friend when tightening the screws after testing that you have a proper gas circuit. Read the limitations as to what handguards it will not fit under. The finish and logo are features that go above what other manufacturers offer on most of these types of products, which shows that VLTOR goes further in making a great part. Every VLTOR product I have used so far shows a higher attention to workmanship, finish, and functionality.

Super nice fit on Black Hole Weap bbl (10.08.2011)

I installed this VLTOR low profile, side clamping, gas block on a standard profile, stainless, 24 inch long, 6.8mm SPC, Black Hole Weaponry barrel. The fit was nice and snug even before I tightened the bolts. It stayed aligned while tightening. I then fit a rifle length gas tube and covered the whole set-up with a Midwest Ind. SS, 15 inch free floating hand-guard. This gas block fit underneath just fine. It fired and cycled from round one and I now have 300 rounds through the rifle without a single problem. No leaks of any gas. Alex Clark Homer, Alaska

Fits like a glove (12.08.2011)

I installed this gas block on a 0.75 inch diameter Black Hole weaponry barrel. It fit nice and snug.
The gas tube hole was nice and snug as well. After tightening I attempted to whack the gas block with a mallet to see if it would move. It did not. Now after 300 hot experimental hand-loads there is NO gas leakage. This gas block fit under a Midwest Industries SS type extended hand-guard without touching.

nice product (26.08.2011)

well made quality product. small, compact, fits right.

great piece (03.11.2013)

High value installs easy and worth every penny!

Solid but Flawed (24.08.2016)

Technically there's nothing wrong with this product. It's a solid, tightly-clamping, beautifully-fitting, streamlined gas block. The one enormous problem is that the standard hex screws it uses still have full-sized heads, heads which are (at least seemingly) in direct, if glancing, contact with the inside of my Midwest Industries MLOK guard. Now this pretty well eliminates any chance of the screws walking loose, but it also threatens the free-float nature of the guard. I so far haven't noticed an effect on accuracy, but I only run a red dot. And in addition to the 6 o'clock rail slot (or half of two of them on mine) being blocked by the bottom portion as is typical, the 4:30 and 3 o'clock slots are also unusable now on account of the screws. Lacking grip panels to guard against heat buildup, the middle 20 percent of my 15" rail is ungrip-able because of this gap. Still, if your technique allows for this or you just want a good, solid clamp design, you could definitely do worse.

Lire 12 plus d'avis sur brownells.com

109.9 109.9 1 CHF

Référence: 100003996
VLTOR WEAPON SYSTEMS AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK
Ref Fabricant: GB2C Slim remplacement pour tour de bloc encombrant USGI front sight/gaz dispose d'un profil bas pour une apparence plus simple et moins de chance d'accrochage sur la végétation et d'autres engins. Couvre seulement 1" de la longueur du canon et réduit le poids vers l'avant de l'arme pour améliorer la manipulation et la maniabilité. Bride sur modèles presser autour du barillet avec vis inclus. Set vis modèles utilisent des vis de fixation inclus au bas de l'appareil pour ancrer le bloc gaz au canon pour l'installation du profil le plus bas.

109.9 CHF 2 CHF 109.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Diamètre Insert: .750 Manufacture: AR-15 Matériaux: Steel Style: Profil-Bas, A Serrage

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Caractéristiques

Diamètre Insert: .750 Manufacture: AR-15 Matériaux: Steel Style: A Serrage,Profil-Bas Poids du colis: 0.045kg Hauteur d'expédition: 20mm Largeur d'expédition: 84mm Longueur d'expédition: 183mm

Détails de l'article

Fabriqué au USA
US export classification: 0A501.x

One-Piece Design Fits Under Free-Float Handguards

Plus...

Conception monobloc Fits sous flottant Handguards

FICHE

Plus...

Évaluations client de VLTOR WEAPON SYSTEMS AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK

Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 4.1

Poor Quality Set Screws (12.02.2015)

Precision at it's Best (24.08.2015)

Nice gas block (12.07.2014)

Less than useful (14.06.2010)

No problems (19.06.2010)

Perfect! (07.07.2010)

Great Low-Pro Steel Gas Block (16.01.2011)

Super nice fit on Black Hole Weap bbl (10.08.2011)

Fits like a glove (12.08.2011)

nice product (26.08.2011)

well made quality product. small, compact, fits right.

great piece (03.11.2013)

High value installs easy and worth every penny!

Solid but Flawed (24.08.2016)

Lire 12 plus d'avis sur brownells.com

Poursuivre vos achats
Equivalents

MANSON PRECISION RIMLESS RIFLE CARTRIDGE, .308 WINCHESTER ROUGHER
RIMLESS RIFLE CARTRIDGES

MANSON PRECISION

En stock

CHF 259.90 * CHF 259.90 - CHF 459.90*

Alésoirs Percuteur Central

MAGPUL AR-15 MOE SL-K STOCK COLLAPSIBLE MIL-SPEC GRAY
AR-15 MOE SL-K STOCK COLLAPSIBLE MIL-SPEC

MAGPUL

En stock

CHF 64.90 *

Crosse d'Epaule

Sale

MAGPUL PMAG RANGER FLOORPLATE, BLACK, 3-PAK
AR-15/16 PMAG RANGER® FLOORPLATE 3 PACK

MAGPUL

En stock

CHF 27.60 *

Ancien prix CHF 33.90

Plaques de Fond Chargeur & Accessoires

4.8

GEISSELE AUTOMATICS TRIGGER FITTING PIN
TRIGGER FITTING PIN

GEISSELE AUTOMATICS

En stock

CHF 28.90 *

Chasse Goupille

3.3

BROWNELLS M16A1 AR-15 BUTTSTOCK ASSEMBLY - BLACK
AR-15 RETRO BUTTSTOCKS

BROWNELLS

Récommandé

CHF 59.90 * CHF 54.90 - CHF 59.90*

Crosse d'Epaule

Connexion

Mot de passe oublié ?
S'inscrire

SOCIAL MEDIA

Facebook

BROWNELLS.CH

CATÉGORIES

COMMANDER

SERVICE CLIENTÈLE

Bienvenue!

Bienvenue sur brownells.ch, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils armurier en Suisse!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler sur les armes en tant que professionnel ou pour votre loisir, ou bien simplement posséder une arme à feu, brownells.fr est fait pour vous! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.professionnels, amateurs, militaires / armuriers des forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers brownells.ch pour s'approvisionner en pièces et fournitures de haute qualité dont ils ont besoin.

* Le prix inclut la TVA mais pas la livraison .

Vue classique

Vue mobile