Brownells Suisse - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Suisse / Schweiz
853675008914 100032675
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
149.9 149.9 1 CHF
Référence: 100032675
AREA 419 ARCALOCK 14" ARCA SWISS RAIL FOR MPA CHASSIS
Ref Fabricant: 419ALKMPA14 853675008914 En raison de la popularité fulgurante de rails ARCA dans les fusils de précision, zone 419 a semblé nécessaire d’améliorer les techniques de queue d’aronde à quelque chose qui pouvaient être verrouillée mécaniquement en place au lieu de juste frottement. La zone 419 ARCALOCK 14" fixation châssis MPA caractéristiques rail dentelé côtés interface rail avec la conception de serrage breveté à verrouiller mécaniquement en place aucun mouvement n’est possible. Il y a 65 postes de verrouillage disponibles sur le rail de 14". Rail est compatible avec les accessoires standard de Arca (ne sera pas verrouiller sans pince zone 419). Le rail est 14″ longtemps vous donnant toute la longueur de la têtière de stock pour les pièces jointes. Poids : 5,6 oz Made à la RCV 1.5" en queue d’aronde Standard Type 3 revêtement dur anodisé pour la longévité supplémentaire. Made de 6061-T6 aluminium Made interne aux Etats-Unis à partir des USA d’origine en aluminium sur USA fait CNCs matériel inclus ici les bords coupants. Chaque coin est un rayon de courbure, et chaque arête est chanfreiné sur la machine. S’étend au-delà de la fin de la plupart des stocks de fusil, ce qui permet une fixation plus loin vers l’avant bipied, accroître la stabilité.
149.9 CHF 1 CHF 149.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Attachment: Adapter Mount

Caractéristiques

Attachment: Adapter Mount Poids du colis: 0.299kg Hauteur d'expédition: 58mm Largeur d'expédition: 56mm Longueur d'expédition: 399mm

Détails de l'article

Fabriqué au USA



Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
Newsletter