Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz
853675008914 100032675
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
149.9 149.9 1 CHF
N. prodotto: 100032675
AREA 419 ARCALOCK 14" ARCA SWISS RAIL FOR MPA CHASSIS
Parti Fabbricante: 419ALKMPA14 853675008914 A causa della rapida crescita di popolarità delle rotaie ARCA in fucili di precisione, zona 419 visto la necessità di migliorare la tecnologia a coda di rondine per qualcosa che poteva essere bloccata meccanicamente a posto invece di solo attrito. La zona 419 ARCALOCK 14" MPA telaio allegato caratteristiche artigli lati interfaccia rail con la progettazione proprietarie morsetto per bloccare meccanicamente in posizione quindi nessun movimento è possibile. Ci sono 65 autobloccante posizioni disponibili sulla guida 14". Rail è retrocompatibile con accessori standard di Arca (non si blocca senza morsetto di zona 419). Rail è 14 ″ dando lungo tutta la lunghezza dell'astina stock per gli allegati. Peso: 5,6 once Made per la RRS 1.5" a coda di rondine Standard tipo 3 rivestimento duro anodizzato per maggior durata. Fatti da 6061-T6 alluminio Made in casa qui negli Stati Uniti da USA provenienza alluminio su USA fatto CNCs Hardware incluso No spigoli vivi. Ogni angolo è arrotondati, e ogni spigolo è smussato sulla macchina. Si estende oltre la fine della maggior parte degli stock rifle, permettendo un attacco ulteriore avanti bipiede, aumentando la stabilità.
149.9 CHF 1 CHF 149.90 *
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche: Attachment: Adapter Mount

Caratteristiche

Attachment: Adapter Mount Peso della spedizione: 0.299kg Altezza di spedizione: 58mm Larghezza di spedizione: 56mm Lunghezza di spedizione: 399mm

Dettagli dell'elemento

Made in Usa



Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
Newsletter