The TTI Benelli Extended AccuGuide Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and comfort of not having your thumb torn up after reloading whether you are a 3-Gunner, a trap and skeet shooter, or you shoot for recreation. This extended carrier is manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat-treated, and extremely polished, providing optimal performance.
SPECS: Drop-in with Benelli M1/M2/M3/M4 RIGHT handed 12 gauge. Can be fitted to Montefeltro, Versamax, and Super Black Eagle, but REQUIRES welding (adding material) and custom installation.
Plus...
Le TTI Benelli prolongée AccuGuide transporteur dispose d'un rail guidé étendu de chaque côté pour aider à centrer le tour tout en rechargeant. Il vous fournira la vitesse et le confort de ne pas avoir le pouce déchiré après rechargement que vous soyez un artilleur-3, un jeu de tir au pigeon d'argile et de piège ou vous tirer pour les loisirs. Ce transporteur étendu est fabriqué d'une seule pièce solide de SAE inox 304, qui élimine la nécessité pour le soudage. Il est traité thermiquement et extrêmement poli, garantissant ainsi des performances optimales.
Spécifications : encastrable avec Benelli M1/M2/M3/M4 droit remis calibre 12. Peut être équipé de Montefeltro, Versamax et Super Black Eagle, mais exige de soudage (ajout de matériel) et installation personnalisée.
Plus...
Évaluations client de TARAN TACTICAL INNOVATIONS BENELLI ACCUGUIDE EXTENDED CARRIER
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 5
Taran Tactical Innovations Delivers(10.12.2014)
Prior to Taran Tactical Innovations release of this Benelli M2 solid shell lifter, you would have to remove your stock Benelli lifter and send it off to have it welded closed on the end. The stock lifter can give what is called "Benelli Thumb", due to its sharp half moon cut at the end of the lifter. Installation of the Taran Tactical Innovations lifter is a easy to moderately difficult task, depending on your skill level and aptitude. A you tube video is available from a non affiliated company on how to do the install. I recommend it to anyone with a Benelli M2 and don't know of any marks against it. TTI is the only one to my knowledge to make a product that is a drop in factory replacement for your Benelli M2 shell lifter.
must have for M2(16.03.2017)
must have for benelli m2, stops the pinch on thumb when loading.
Fitting required for Girsan MC 312(14.02.2018)
Works very well, leaving this review to let people know that this can be made to fit in the Girsan MC312. There is about 5mm too much material a the back of the carrier (between the âlegsâ) 5 min with a dremel cutoff and polishing wheel and it fits like a charm
Référence: 100015582 TARAN TACTICAL INNOVATIONS BENELLI ACCUGUIDE EXTENDED CARRIER Ref Fabricant: BNLICRLFT Le TTI Benelli prolongée AccuGuide transporteur dispose d'un rail guidé étendu de chaque côté pour aider à centrer le tour tout en rechargeant. Il vous fournira la vitesse et le confort de ne pas avoir le pouce déchiré après rechargement que vous soyez un artilleur-3, un jeu de tir au pigeon d'argile et de piège ou vous tirer pour les loisirs. Ce transporteur étendu est fabriqué d'une seule pièce solide de SAE inox 304, qui élimine la nécessité pour le soudage. Il est traité thermiquement et extrêmement poli, garantissant ainsi des performances optimales.
124.9CHF0CHF 124.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
The TTI Benelli Extended AccuGuide Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and comfort of not having your thumb torn up after reloading whether you are a 3-Gunner, a trap and skeet shooter, or you shoot for recreation. This extended carrier is manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat-treated, and extremely polished, providing optimal performance.
SPECS: Drop-in with Benelli M1/M2/M3/M4 RIGHT handed 12 gauge. Can be fitted to Montefeltro, Versamax, and Super Black Eagle, but REQUIRES welding (adding material) and custom installation.
Plus...
Le TTI Benelli prolongée AccuGuide transporteur dispose d'un rail guidé étendu de chaque côté pour aider à centrer le tour tout en rechargeant. Il vous fournira la vitesse et le confort de ne pas avoir le pouce déchiré après rechargement que vous soyez un artilleur-3, un jeu de tir au pigeon d'argile et de piège ou vous tirer pour les loisirs. Ce transporteur étendu est fabriqué d'une seule pièce solide de SAE inox 304, qui élimine la nécessité pour le soudage. Il est traité thermiquement et extrêmement poli, garantissant ainsi des performances optimales.
Spécifications : encastrable avec Benelli M1/M2/M3/M4 droit remis calibre 12. Peut être équipé de Montefeltro, Versamax et Super Black Eagle, mais exige de soudage (ajout de matériel) et installation personnalisée.
Plus...
Évaluations client de TARAN TACTICAL INNOVATIONS BENELLI ACCUGUIDE EXTENDED CARRIER
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 5
Taran Tactical Innovations Delivers(10.12.2014)
Prior to Taran Tactical Innovations release of this Benelli M2 solid shell lifter, you would have to remove your stock Benelli lifter and send it off to have it welded closed on the end. The stock lifter can give what is called "Benelli Thumb", due to its sharp half moon cut at the end of the lifter. Installation of the Taran Tactical Innovations lifter is a easy to moderately difficult task, depending on your skill level and aptitude. A you tube video is available from a non affiliated company on how to do the install. I recommend it to anyone with a Benelli M2 and don't know of any marks against it. TTI is the only one to my knowledge to make a product that is a drop in factory replacement for your Benelli M2 shell lifter.
must have for M2(16.03.2017)
must have for benelli m2, stops the pinch on thumb when loading.
Fitting required for Girsan MC 312(14.02.2018)
Works very well, leaving this review to let people know that this can be made to fit in the Girsan MC312. There is about 5mm too much material a the back of the carrier (between the âlegsâ) 5 min with a dremel cutoff and polishing wheel and it fits like a charm